1. Introduction
Thank you for choosing the Manta EPB1501. This device is designed to provide effective sterilization for various small personal items using advanced UV-C technology. Please read this manual thoroughly before using the device to ensure proper operation and to maximize its lifespan. Keep this manual for future reference.
2. Safety Information
- Do not expose the device to water or excessive moisture.
- Keep out of reach of children.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- Use only the provided power adapter or a compatible one with the correct voltage and current specifications.
- Avoid direct exposure to the UV light when the lid is open.
- Do not place flammable or explosive materials inside the device.
3. Package Contents
Please check the package for the following items:
- Manta EPB1501 Sterilizer Unit
- USB Power Cable
- User Manual (this document)
4. Device Overview

Figure 4.1: Manta EPB1501 UV Sterilizer (Closed View). This image shows the compact, rectangular design of the Manta EPB1501, with a power input port and indicator lights visible on the front panel.

Figure 4.2: Manta EPB1501 UV Sterilizer (Open View with Example Items). This image illustrates the device with its lid open, revealing the interior compartment and blue UV lights. Surrounding the device are examples of small items that can be sterilized, such as keys, watches, eyeglasses, smartphones, earphones, jewelry, and face masks.
The Manta EPB1501 features a compact design with a sterilization chamber, UV-C lamps, and control buttons. It is designed for easy operation and portability.
5. Setup
- Unpack the Device: Carefully remove the Manta EPB1501 and all accessories from the packaging.
- Choose a Location: Place the device on a stable, flat, and dry surface, away from direct sunlight or heat sources.
- Connect Power: Insert the small end of the USB power cable into the power input port on the device. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port on a computer.
- Power On: The device will typically power on automatically when connected, indicated by a light or display.
6. Operating Instructions
6.1 Sterilization Process
- Open the Lid: Gently lift the lid of the Manta EPB1501.
- Place Items Inside: Carefully place the items you wish to sterilize into the chamber. Ensure items are not overlapping excessively to allow for optimal UV exposure. The chamber is suitable for small items such as smartphones, keys, jewelry, watches, and eyeglasses.
- Close the Lid: Close the lid securely. The sterilization process will typically begin automatically or after pressing a start button.
- Monitor Progress: Indicator lights on the device will show the sterilization progress. A typical cycle lasts approximately 5-10 minutes.
- Cycle Completion: The device will usually emit an audible signal or the indicator lights will change when the sterilization cycle is complete.
- Remove Items: Open the lid and carefully remove your sterilized items.
6.2 Aromatherapy Function (if applicable)
Some models may include an aromatherapy function. If available, locate the small aromatherapy inlet (usually a small hole or compartment) inside the chamber. Add 1-2 drops of essential oil (not included) into this inlet before closing the lid and starting the sterilization cycle. The aroma will diffuse during the process.
7. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior of the device. Do not use abrasive cleaners or immerse the device in water.
- Interior Cleaning: For the interior, use a soft, lint-free cloth. Avoid touching the UV lamps directly.
- Storage: When not in use, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Not connected to power; faulty cable/adapter. | Ensure the USB cable is securely connected. Try a different USB port or power adapter. |
| Sterilization cycle does not start. | Lid not closed properly; device not powered. | Ensure the lid is fully closed. Check power connection. |
| Indicator lights are not working. | Device malfunction. | Contact customer support if troubleshooting steps do not resolve the issue. |
9. Specifications
- Model: EPB1501
- Brand: Manta
- Input: Standard USB (5V/1A recommended)
- Dimensions: 50 x 50 x 28 cm
- Weight: 1 kg
- Sterilization Method: UV-C Light
10. Warranty and Support
Specific warranty information for the Manta EPB1501 is not provided in the product data. Please refer to the retailer or your purchase documentation for details regarding warranty coverage and terms.
For technical support or inquiries, please contact Manta customer service through their official website or the contact information provided with your purchase.





