Introduction
Thank you for choosing the Axglo Flip n' Go Pro Golf Push Cart. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new golf push cart. Please read it thoroughly before use and retain it for future reference.
Safety Information
- Always engage the hand brake when the cart is stationary, especially on inclines.
- Ensure all locking mechanisms are securely fastened before use.
- Do not overload the cart beyond its intended capacity.
- Keep hands and fingers clear of moving parts during folding and unfolding.
- Store the cart in a dry, secure location when not in use.
Product Components
The Axglo Flip n' Go Pro Golf Push Cart includes the following main components:
- Main Cart Body
- Wheels (4, including swivel front wheels)
- Handle with Hand Brake
- Upper and Lower Bag Straps
- Storage Console (with tee holders, ball holders, scorecard/map area)
- Umbrella Holder
- Cup Holder
- Storage Bag (optional, sold separately)
Figure 1: Overview of the Axglo Flip n' Go Pro Golf Push Cart.
Setup and Assembly
- Unfolding the Cart:
The Flip n' Go Pro features a 1-step folding design. To unfold, gently pull up the handle while lightly stepping on the top of the front wheel. The cart frame will extend and lock into place automatically.
Figure 2: The cart in its compact, folded state.
- Attaching the Wheels:
The rear wheels are designed for quick attachment and removal to save storage space. Align the wheel axle with the hub and push until it clicks securely into place. The front swivel wheels are typically pre-attached.
- Securing Your Golf Bag:
Place your golf bag onto the cart's lower support. Use the adjustable upper and lower bag straps to firmly secure your golf bag to the cart. Ensure the bag is centered and stable.
Figure 3: Golf bag secured on the push cart.
- Attaching Accessories:
The umbrella holder and cup holder are included and can be easily attached to the designated slots on the handle assembly. The umbrella holder is universal and adjustable.
Figure 4: Close-up of the handle console with accessories.
Operating Instructions
Using the Hand Brake
The Axglo Flip n' Go Pro is equipped with a convenient hand brake located on the handle. To engage the brake, squeeze the lever. To release, simply release the lever. Always engage the brake when the cart is stationary to prevent unintended movement.
Swivel Front Wheels
The cart features 360-degree swivel front wheels for enhanced maneuverability. This allows for easy steering and navigation around the golf course. You can lock the swivel function of the front wheels using the lock button located near the front wheel assembly, providing stability on uneven terrain or when pushing in a straight line.
Figure 5: Swivel front wheels with lock/unlock indicator.
Storage Console and Pockets
Utilize the two separate large storage consoles on the handle for golf balls, tees, scorecard, and other small accessories. The main console often features a magnetic lid for secure closure. Additional storage pockets are located on the cart frame for larger items or a cooler bag.
Figure 6: Main storage console with internal compartments.
Maintenance
- Cleaning: Wipe down the cart with a damp cloth after each use to remove dirt and debris. Avoid harsh chemicals.
- Wheel Inspection: Regularly check wheels for wear and tear. Ensure they rotate freely and are securely attached.
- Brake Check: Periodically test the hand brake to ensure it engages and disengages properly.
- Storage: For long-term storage, clean the cart thoroughly, remove the rear wheels for compactness, and store in a dry, cool place.
- Lubrication: Apply a small amount of silicone-based lubricant to moving joints and wheel axles annually or as needed to ensure smooth operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cart does not unfold/fold smoothly. | Mechanism obstructed or stiff. | Check for debris. Apply lubricant to pivot points. Ensure proper technique (pull handle, step on front wheel). |
| Wheels are wobbly or loose. | Wheels not fully engaged or axle nut loose. | Ensure wheels are clicked into place. Check and tighten axle nuts if applicable. |
| Hand brake is not engaging/releasing. | Cable tension incorrect or mechanism jammed. | Inspect brake cable for damage or kinks. Adjust cable tension if necessary (refer to detailed brake adjustment guide if available). |
| Cart pulls to one side. | Uneven weight distribution or wheel alignment issue. | Distribute golf bag weight evenly. Check if front swivel wheels are locked or if one wheel is obstructed. |
Specifications
- Brand: Axglo
- Model Name: Axglo Flip n' Go Pro
- Material: Aluminum
- Item Weight: 16 Pounds (approx. 7.26 kg)
- Folded Dimensions (L x W x H): 26" x 18" x 17.5" (approx. 66 cm x 45.7 cm x 44.5 cm)
- Unfolded Dimensions (L x W x H): 19.7" x 33.5" x 47.2" (approx. 50 cm x 85 cm x 120 cm)
- Included Components: Body, Wheels, Cup Holder, Umbrella Holder
Warranty Information
The Axglo Flip n' Go Pro Golf Push Cart comes with a 1 Year Limited Warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the official Axglo website or contact customer support.
Customer Support
For any questions, technical assistance, or warranty inquiries regarding your Axglo Flip n' Go Pro Golf Push Cart, please contact Axglo customer support through their official website or the contact information provided with your purchase.
Website: www.axglo.com (Note: This is a placeholder URL. Please refer to your product packaging for the correct website.)
