Product Overview
The 4DRC RC Drift Car is a high-performance, 4-wheel drive remote control vehicle designed for both racing and drifting. It features powerful motors capable of reaching speeds over 30 KM/H, ensuring an exhilarating experience across various terrains. The advanced 2.4GHz radio control system provides a stable signal and a wide operating range, allowing for distraction-free play.
Constructed with high-quality, durable materials including metal sealed ball bearings, oil-filled metal shocks, anti-skid rubber tires, and a nylon chassis, this RC car is built to withstand rigorous use. It comes equipped with two interchangeable car bodies and two sets of tires (racing and drift) for versatile play options.
Image: The 4DRC RC Drift Car, showcasing its primary truck-style body, remote control, two rechargeable batteries, a set of racing tires, a set of drift tires, and an additional car-style body.
Package Contents
- 1 x 4DRC RC Drift Car (with one body installed)
- 1 x 2.4GHz Remote Control
- 2 x 3.7V 1200mAh Rechargeable Li-Po Batteries
- 1 x USB Charging Cable
- 1 x Extra Car Body (alternate style)
- 1 x Set of Racing Tires (pre-installed or separate)
- 1 x Set of Drift Tires
- 1 x Small Screwdriver
Setup Guide
1. Battery Installation
Ensure the car and remote control are powered off before installing batteries.
- Car Battery: Locate the battery compartment on the underside of the car. Open the latch, insert one of the 3.7V 1200mAh Li-Po batteries, and securely close the compartment.
- Remote Control Battery: Open the battery cover on the back of the remote control. Insert 2 x AA batteries (not included), ensuring correct polarity. Close the cover.
Image: Illustration of the battery compartment on the underside of the RC car, highlighting the ease of battery insertion.
2. Remote Control Pairing
Turn on the RC car first, then turn on the remote control. The remote will automatically pair with the car. A solid indicator light on the remote signifies successful pairing.
3. Changing Car Bodies
The car comes with two different body styles (truck and car). To change the body, carefully remove the body clips holding the current shell in place. Lift off the current body and place the desired body onto the chassis, securing it with the body clips.
Image: The two interchangeable car bodies, demonstrating the versatility of the product.
4. Changing Tires
The car includes both racing tires for grip and drift tires for sliding. To change tires, use the provided screwdriver to loosen the wheel nuts. Remove the current tires and replace them with the desired set, then tighten the wheel nuts securely.
Image: The RC car with both racing and drift tires, illustrating the ability to switch between them for different driving styles.
Operating Instructions
1. Basic Controls
- Throttle Trigger: Pull to accelerate forward, push to brake/reverse.
- Steering Wheel: Turn left or right to steer the car.
Image: The remote control, highlighting the speed governing valve and acceleration/retreat trigger for precise control.
2. Speed Adjustment
The remote control features a speed adjustment function, allowing you to fine-tune the car's maximum speed. This is useful for beginners or for operating in smaller spaces.
Video: Demonstrates the 4DRC H4 RC Car in action, showcasing its high-speed capabilities, drifting, and the speed adjustment feature on the remote control. This video is provided by the seller.
3. Drifting Techniques
With the drift tires installed, practice initiating drifts by turning the steering wheel sharply while applying throttle. Experiment with throttle control and counter-steering to maintain the drift.
4. All-Terrain Performance
The 4WD system and robust design allow the car to perform on various surfaces including desert, rock, grass, sand, and concrete roads. Adjust your driving style based on the terrain for optimal performance.
Image: The RC car positioned on a rocky surface, illustrating its suitability for all-terrain driving.
Image: The RC car shown on different terrains, including a paved track, grassy area, and dirt, emphasizing its all-terrain versatility.
Maintenance
- Battery Care: Always fully charge batteries before use. Disconnect batteries from the car when not in use. Store batteries in a cool, dry place.
- Cleaning: After each use, especially on dirty or wet surfaces, clean the car to remove dirt, dust, and debris. Use a soft brush or cloth. Avoid using water directly on electronic components.
- Inspection: Regularly inspect the wheels, suspension, and chassis for any loose parts or damage. Tighten screws as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car not responding to remote. | Low battery in car or remote; not paired. | Charge/replace batteries. Re-pair car and remote. |
| Reduced speed or power. | Low car battery; motor/gears obstructed. | Recharge car battery. Check for debris in motor/gears. |
| Steering not working correctly. | Steering trim off; damaged servo. | Adjust steering trim on remote. Inspect servo for damage. |
| Car makes unusual noises. | Debris in gears; loose parts. | Clean gears. Inspect and tighten any loose components. |
Specifications
- Product Dimensions: 8 x 6 x 3 inches
- Item Weight: 2.29 pounds
- Country of Origin: China
- Item Model Number: 4DH4-2-ST
- Manufacturer Recommended Age: 8 years and up
- Batteries: 2 Lithium Ion batteries required (included)
- Max Speed: 30+ KM/H (approx. 20 MPH)
- Control Frequency: 2.4GHz
- Play Time: Up to 25 minutes per battery (50 minutes total with 2 batteries)
Warranty and Support
For any questions, issues, or warranty claims regarding your 4DRC RC Drift Car, please contact the seller or manufacturer directly through the platform where the product was purchased. Please retain your proof of purchase for warranty purposes.
