1. Introduction
This manual provides detailed instructions for the proper use and maintenance of the FIT KING FT-082A Control Unit. This unit is designed as a replacement part and is compatible with all sizes of the FIT KING FT-082A device. It features a portable design, is easy to operate, and incorporates a low-noise design for user comfort.
Figure 1: FIT KING FT-082A Control Unit. This image displays the FIT KING FT-082A control unit. It features a central display screen, with four control buttons below it: ON/OFF, MODE, PRESSURE, and TIME. The brand name 'Fit KING' is visible below the buttons. The unit is black with a smooth, ergonomic design.
2. Safety Information
Please read all safety instructions before operating the device to prevent injury or damage. Retain this manual for future reference.
- Use with caution to avoid electrical hazards. Ensure the unit is connected to a stable power source as specified.
- Be mindful of the user's comfort and safety when using the massager in conjunction with this control unit. Discontinue use if discomfort or pain occurs.
- Do not attempt to open or repair the control unit yourself. Refer to qualified service personnel for any repairs.
- Keep the unit away from water and excessive moisture.
- Store the unit in a cool, dry place when not in use.
3. Setup
To set up your FIT KING FT-082A Control Unit:
- Unpack: Carefully remove the control unit from its packaging.
- Inspect: Check the unit for any visible damage. If damaged, do not use and contact customer support.
- Connect to Device: Locate the connection port on your FIT KING FT-082A massager cuffs (or compatible device). Insert the connector from the control unit firmly into the device's port. Ensure a secure connection.
- Power Connection: Connect the power adapter (not included, typically comes with the main massager unit) to the control unit's power input port. Plug the adapter into a suitable electrical outlet.
4. Operating Instructions
The FIT KING FT-082A Control Unit features an intuitive interface with a display screen and four control buttons:
- 1. ON/OFF Button (
): Press this button to turn the unit ON or OFF. The display will illuminate when the unit is powered on. - 2. MODE Button (M): Press this button to cycle through available massage modes. Each press will change the mode, which will be indicated on the display screen.
- 3. PRESSURE Button (
): Use this button to adjust the pressure intensity of the massage. Repeated presses will increase or decrease the pressure level, shown on the display. - 4. TIME Button (
): This button allows you to set the duration of the massage session. Each press will cycle through preset time intervals.
Refer to the main device's manual for specific mode and pressure recommendations.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your control unit.
- Cleaning: Wipe the surface of the control unit with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Storage: When not in use, store the control unit in a clean, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Avoid bending or twisting the power cable excessively. Do not pull the cable to disconnect the unit from the power outlet.
6. Troubleshooting
If you encounter issues with your FIT KING FT-082A Control Unit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply; loose connection. | Ensure the power adapter is securely connected to both the unit and the electrical outlet. Check if the outlet is functional. |
| Display is blank or unresponsive. | Unit is off; internal error. | Press the ON/OFF button. If still unresponsive, disconnect power for 30 seconds and reconnect. |
| Buttons are not responding. | Temporary software glitch. | Turn the unit off and then on again. If the issue persists, contact customer support. |
| No massage action from connected device. | Loose connection to massager; massager issue. | Ensure the control unit is securely connected to the massager cuffs. Refer to the massager's manual for troubleshooting. |
7. Specifications
| Model Number | FT-082A |
| Brand | FIT KING |
| Product Dimensions | 7 x 3.5 x 2 inches |
| Item Weight | 0.5 Kilograms (1.1 Pounds) |
| Material | Plastic |
| Power Source | Corded Electric |
| Manufacturer | FIT KING |
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your original FIT KING FT-082A massager device or visit the official FIT KING website. Please have your model number (FT-082A) and purchase details ready when contacting support.
9. Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not a medical device and should not be used as a substitute for professional medical advice or treatment.
