1. Introduction and Overview
This instruction manual provides essential information for the proper use and maintenance of your HOLFENRY Adult Pulse Oximeter Probe. This probe is specifically designed for use with the HOLFENRY handheld pulse oximeter JKS50F. It is suitable for individuals aged 12 and over, including adults and teenagers.
The probe measures 200 cm (6.6 ft) in length and is engineered for comfort and continuous monitoring of SpO2 (blood oxygen saturation), PR (pulse rate), and PI (perfusion index).
Features of the HOLFENRY Adult Pulse Oximeter Probe, highlighting its comfortable design, suitability for users aged 12 and above, continuous monitoring capabilities, and its function in measuring SpO2, PR, and PI.
2. Safety Information
- Compatibility: Use this probe exclusively with the HOLFENRY handheld pulse oximeter JKS50F. Incompatible devices may lead to inaccurate readings or damage.
- Age Restriction: This probe is designed for individuals aged 12 and over. Do not use on infants or young children unless specified by a healthcare professional.
- Proper Placement: Ensure the probe is correctly positioned on the finger. Improper placement can result in inaccurate readings or discomfort.
- Movement: Keep the finger still during measurements to ensure accurate results.
- Skin Irritation: If you experience any burning sensation, discomfort, or skin irritation during use, discontinue use immediately and consult a healthcare professional.
- Medical Device: This device is intended for general wellness and health awareness. It is not intended to diagnose, treat, cure, or prevent any disease or health condition. Consult a medical professional for any health concerns.
3. Package Contents
- 1 x HOLFENRY Adult Pulse Oximeter Probe (6.6ft)
Note: The HOLFENRY JKS50F Handheld Pulse Oximeter is sold separately.
The HOLFENRY Adult Pulse Oximeter Probe, featuring its 6.6ft cable and finger clip design.
4. Setup Instructions
- Unpack the Probe: Carefully remove the probe from its packaging.
- Identify the Connector: Locate the connector end of the probe cable.
- Connect to Oximeter: Insert the probe connector firmly into the designated port on your HOLFENRY JKS50F Handheld Pulse Oximeter. Ensure a secure connection.
- Prepare for Use: The probe is now ready to be attached to the user's finger for measurement.
The soft silicone design of the probe ensures comfort during placement on the finger.
5. Operating Instructions
Once the probe is connected to the HOLFENRY JKS50F Oximeter, follow these steps for accurate readings:
- Power On Oximeter: Turn on your HOLFENRY JKS50F Handheld Pulse Oximeter according to its specific instructions.
- Attach Probe: Gently open the finger clip of the probe and place it on an adult finger (typically the index, middle, or ring finger). Ensure the finger is fully inserted and the probe is positioned correctly.
- Remain Still: Keep the hand and finger as still as possible during the measurement process. Movement can interfere with accuracy.
- Read Results: The oximeter will display real-time measurement results for SpO2, PR, and PI within a few seconds.
- Remove Probe: After obtaining the reading, gently remove the probe from the finger.
The probe is designed for continuous monitoring, even during sleep, providing SpO2 and heart rate data.
The oximeter screen displays SpO2, PR, and PI. The probe is suitable for ages 12 and up.
6. Maintenance and Care
- Cleaning: After each use, gently wipe the finger contact area of the probe with a soft cloth dampened with a mild disinfectant (e.g., 70% isopropyl alcohol). Ensure no liquid enters the connector or internal components.
- Drying: Allow the probe to air dry completely before storing or next use.
- Storage: Store the probe in a clean, dry place away from direct sunlight, extreme temperatures, and humidity. Keep it away from sharp objects to prevent damage to the cable or sensor.
- Inspection: Regularly inspect the probe cable and finger clip for any signs of wear, damage, or fraying. If any damage is observed, discontinue use and replace the probe.
7. Troubleshooting
If you encounter issues with your HOLFENRY Adult Pulse Oximeter Probe, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No reading or inaccurate readings |
|
|
| Discomfort or burning sensation on finger |
|
|
| Heart rate (PR) readings appear inaccurate |
|
|
| Probe appears faulty or damaged | Physical damage to cable or sensor. | Discontinue use immediately. Contact HOLFENRY customer support or your seller for replacement options. |
8. Specifications
- Model: Adult Probe (6.6ft)
- Compatibility: HOLFENRY JKS50F Handheld Pulse Oximeter
- Cable Length: 200 cm (6.6 ft)
- Suitable Age Group: 12 years and over (Adults, Teenagers)
- Measurements: SpO2, PR, PI (Perfusion Index)
- Manufacturer: HOLFENRY
- ASIN: B0DR7ZTG94
- Package Dimensions: 0.39 x 0.39 x 0.39 inches
- Item Weight: 1.76 ounces
9. Warranty and Support
For warranty information, please refer to the documentation provided with your original HOLFENRY JKS50F Handheld Pulse Oximeter or contact HOLFENRY customer support directly. Specific warranty terms for accessories like this probe may vary.
If you require technical assistance or have questions regarding the use of this probe, please contact HOLFENRY customer service through their official website or the retailer where the product was purchased.
10. Important Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not a medical device and should not be used for medical diagnosis or treatment. Always consult with a qualified healthcare professional for any health concerns or before making any decisions about your health.