Abask A8 4K+1080P Dual Dash Cam User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Abask A8 4K+1080P Dual Dash Cam. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

1.1 Package Contents

Verify that all items listed below are included in your package:

• 4K Front Camera with GPS
• 1080P Inside Camera
• 32GB SD Card
• SD Card Reader
• Suction Mount
• Cable Clips
• Installation Crowbar
• User Manual (this document)
• Cigarette Lighter Adapter
• Mini USB Cable

2. Safety Information

• Do not operate the dash cam or access its settings while driving.
• Ensure the dash cam is installed in a location that does not obstruct the driver's view or interfere with vehicle safety features.
• Use only the provided power adapter and cables to prevent damage or fire.
• Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or moisture.
• Keep the lens clean for optimal recording quality.
• Regularly back up important footage and format the SD card to maintain performance.

3. Product Overview

The Abask A8 is a dual dash cam system designed to record both the road ahead and the vehicle's interior. It features 4K front recording, 1080P interior recording, built-in GPS, G-sensor, loop recording, and 24-hour parking monitoring.

3.1 Key Features

• Dual Recording: Simultaneous 4K (front) and 1080P (interior) video capture.
• Built-in GPS: Records driving route, speed, and location data.
• Infrared Night Vision: Enhanced recording quality in low-light conditions for the interior camera.
• G-Sensor: Automatically detects collisions and locks important footage.
• Loop Recording: Overwrites oldest unlocked files when the memory card is full.
• 24-Hour Parking Monitoring: Records motion or impacts when the vehicle is parked.
• Super Capacitor: Provides enhanced durability and temperature resistance.
• WDR Technology: Optimizes video exposure for balanced images in varying light conditions.
• Wide Angle View: 170° front lens and 140° interior lens for comprehensive coverage.

4. Setup

4.1 Inserting the Micro SD Card

1. Ensure the dash cam is powered off.
2. Locate the Micro SD card slot on the side of the dash cam.
3. Insert the 32GB Micro SD card (included) with the gold contacts facing the back of the camera until it clicks into place.
4. To remove, gently push the card in until it clicks, then release.

Note: For optimal performance, it is recommended to format the SD card within the dash cam settings upon first use and periodically thereafter.

4.2 Mounting the Dash Cam

1. Clean the windshield area where you intend to mount the dash cam.
2. Attach the suction mount to the dash cam.
3. Press the suction cup firmly against the windshield and flip the lever to secure it. Position the camera to ensure a clear view of the road ahead and the interior.
4. Adjust the camera angle as needed. The front lens has a 170° field of view, and the interior lens has a 140° field of view.

4.3 Power Connection

1. Connect the Mini USB cable to the dash cam's power port.
2. Plug the other end of the Mini USB cable into the cigarette lighter adapter.
3. Insert the cigarette lighter adapter into your vehicle's 12V power socket.
4. Route the power cable neatly along the windshield and dashboard using the provided cable clips and installation crowbar to avoid obstructing your view.

5. Operating Instructions

5.1 Powering On/Off and Recording

• When connected to power, the dash cam will automatically power on and begin recording when the vehicle starts.
• To manually power on/off, press and hold the power button.
• A red indicator light or icon on the screen typically indicates active recording.

5.2 Menu Navigation

Use the physical buttons on the dash cam to navigate through the menu options. Typically, there are buttons for Menu, Up, Down, OK/Confirm, and Mode.

• Press the Menu button to access settings.
• Use Up/Down buttons to scroll through options.
• Press OK to select an option or confirm a setting.
• Press the Mode button to switch between video recording, photo mode, and playback mode.

5.3 Dual Recording

The dash cam simultaneously records video from the front-facing camera in 4K resolution and the interior-facing camera in 1080P resolution. Both feeds are saved to the Micro SD card.

5.4 Loop Recording

This feature ensures continuous recording by overwriting the oldest unlocked video files when the SD card reaches its capacity. Video segments are typically recorded in 1, 3, or 5-minute intervals. You can adjust the loop recording duration in the settings menu.

5.5 G-Sensor (Emergency Recording)

The built-in G-sensor detects sudden impacts or rapid acceleration/deceleration. When triggered, it automatically locks the current video segment, preventing it from being overwritten by loop recording. The sensitivity of the G-sensor can be adjusted in the settings.

5.6 24-Hour Parking Monitoring

When enabled, the parking monitor feature allows the dash cam to automatically record if it detects motion or an impact while your vehicle is parked. This requires a continuous power supply (e.g., hardwire kit, sold separately) or the dash cam's internal battery/super capacitor to have sufficient charge.

5.7 GPS Functionality

The built-in GPS module records your vehicle's speed, location, and driving route. This data can be viewed alongside your video footage using a compatible GPS player software on a Windows or Mac computer. The GPS viewer software can typically be found on the manufacturer's website or provided on the included SD card reader.

5.8 Night Vision and WDR Technology

The interior camera features infrared night vision for clear recording in low-light conditions. WDR (Wide Dynamic Range) technology automatically adjusts exposure to balance bright and dark areas in the video, ensuring clear footage even in challenging lighting environments.

6. Maintenance

6.1 SD Card Care

• Regularly format the Micro SD card (at least once a month) to prevent data corruption and ensure optimal recording performance.
• Use high-quality, high-speed (Class 10 or U3 recommended) Micro SD cards from reputable brands.
• Avoid removing the SD card while the device is powered on or recording.

6.2 Cleaning the Device

• Use a soft, dry cloth to clean the dash cam's body.
• For the lenses, use a lens cleaning cloth or specialized lens wipes to avoid scratches.
• Do not use chemical cleaners or solvents.

6.3 Super Capacitor

The Abask A8 uses a super capacitor instead of a traditional lithium battery. This provides enhanced durability and safety, allowing the dash cam to operate reliably in extreme temperatures (14°F to 158°F / -10°C to 70°C) and reducing the risk of overheating or explosion. The super capacitor provides enough power to safely save the last recording file when power is cut off.

7. Troubleshooting

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support.

8. Specifications

9. Warranty and Support

9.1 Product Warranty

Abask offers an 18-month warranty for the entire dash cam unit. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Additionally, a 30-day money-back guarantee is provided.

9.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact Abask customer support. Lifetime service and technical support are provided for this product. You can typically reach support via the Amazon message system or the email address provided in your purchase documentation.

Firmware updates are continuously released to improve features and performance. Check the official Abask website for the latest updates.