1. Introduction
Thank you for choosing the KOORUI 24-inch Curved Gaming Monitor, model MG24A12F. This manual provides essential information for setting up, operating, and maintaining your monitor. Please read it thoroughly before use to ensure proper functionality and to maximize your viewing experience.
2. Safety Information
- Always place the monitor on a stable, flat surface to prevent it from falling.
- Do not block ventilation openings. Ensure adequate space around the monitor for proper airflow.
- Use only the power adapter supplied with the monitor.
- Keep the monitor away from water, moisture, and direct sunlight.
- If any abnormal conditions occur (e.g., smoke, strange odors), immediately unplug the monitor and contact customer support.
- Avoid touching the screen with sharp objects.
3. Package Contents
Please check the box for the following items:
- KOORUI 24-inch Curved Gaming Monitor (MG24A12F)
- DP Cable
- Power Adapter
- User Manual (this document)
4. Monitor Overview
4.1 Front View
The front of the monitor features the 24-inch curved display with an ultra-thin bezel, providing an immersive viewing experience.
4.2 Rear View and Ports
The rear of the monitor houses the input ports and control buttons.
Image: Rear view of the KOORUI 24-inch Curved Gaming Monitor, illustrating the various connection ports and the stand mounting area.
- HDMI 2.0 Port: For connecting to devices via HDMI cable.
- DisplayPort 1.2: For connecting to devices via DisplayPort cable.
- Audio Out Port: For connecting external headphones or speakers.
- Power Input: For connecting the power adapter.
5. Setup
5.1 Assembling the Stand
- Carefully remove the monitor and stand components from the packaging.
- Attach the stand base to the stand neck using the provided screws.
- Align the assembled stand with the mounting area on the back of the monitor and secure it firmly.
5.2 Connecting the Monitor
- Ensure both the monitor and your computer are powered off.
- Connect one end of the DP cable (or HDMI cable) to the corresponding port on your computer's graphics card.
- Connect the other end of the DP cable (or HDMI cable) to the DisplayPort (or HDMI port) on the monitor.
- Connect the power adapter to the monitor's power input, then plug the adapter into a power outlet.
- Optionally, connect headphones or speakers to the audio out port.
6. Operating Instructions
6.1 Power On/Off
Press the power button, usually located on the bottom or rear of the monitor, to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.
6.2 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Typically, buttons on the rear or bottom of the monitor are used to navigate and select options within the OSD.
- Brightness/Contrast: Adjust the display's luminance and color depth.
- Color Settings: Modify color temperature, gamma, and individual RGB levels.
- Input Select: Manually switch between HDMI and DisplayPort inputs.
- Refresh Rate: Confirm or set the desired refresh rate (up to 165Hz).
- FreeSync: Enable or disable Adaptive Sync (FreeSync) for smoother gaming.
- Picture Mode: Select from preset display modes (e.g., Standard, Game, Movie).
6.3 Tilt Adjustment
The monitor supports adjustable tilt. Gently hold both sides of the monitor and tilt it to your preferred viewing angle. Do not apply excessive force.
7. Maintenance
7.1 Cleaning the Screen
- Turn off the monitor and unplug the power cord.
- Use a soft, lint-free cloth slightly dampened with water or a specialized screen cleaner.
- Wipe the screen gently. Do not spray cleaner directly onto the screen.
7.2 Cleaning the Casing
- Use a soft, dry cloth to wipe the monitor casing.
- Avoid using abrasive cleaners or solvents.
8. Troubleshooting
If you encounter issues with your monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Monitor not powered on; Incorrect input selected; Loose video cable. | Ensure power is connected and monitor is on; Select correct input source via OSD; Check video cable connections. |
| Image flickering | Video cable issue; Graphics card driver issue; Refresh rate mismatch. | Replace video cable; Update graphics drivers; Adjust refresh rate in PC display settings. |
| Colors appear incorrect | Color settings misconfigured; Faulty cable. | Reset color settings in OSD; Try a different video cable. |
| Monitor not detected by PC | Video cable not connected properly; PC display settings. | Ensure video cable is securely connected; Restart PC; Check display settings in your operating system. |
9. Specifications
| Brand | KOORUI |
| Model Number | MG24A12F |
| Screen Size | 24 inches |
| Panel Type | VA |
| Curvature | 1500R |
| Resolution | FHD (1920 x 1080) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 165 Hz |
| Response Time | 1 millisecond |
| Contrast Ratio | 3000:1 (Static) |
| Brightness | 250 cd/m² (lm) |
| Color Gamut | DCI-P3 90% |
| Viewing Angle | 178 Degrees |
| Connectivity | 1x HDMI 2.0, 1x DisplayPort 1.2, Audio Out |
| Adaptive Sync | FreeSync |
| Power Consumption | 30 Watt |
| Item Weight | 4.87 Kilograms |
| Dimensions (D x W x H) | 6.8 x 53.7 x 31.9 centimeters |
| VESA Mount Type | Desktop Mount |
10. Warranty and Support
10.1 Warranty Information
This KOORUI monitor comes with a 2-year manufacturer's warranty. Additionally, a 12-month exchange service is provided for eligible issues. Please retain your proof of purchase for warranty claims.
10.2 Technical Support
For any technical assistance, questions, or concerns regarding damages, malfunctions, or missing accessories, please contact KOORUI customer support. Technical support is available via phone.
No official product videos from the seller were found for this model.