1. Important Safety Information & Initial Setup
Please read this user manual thoroughly before operating the WANAI Ice Maker Machine. Adhering to these guidelines will ensure safe and efficient use of your appliance.
- Upon receiving the product, allow it to stand upright steadily on a flat, stable surface for 2-4 hours before plugging it in or turning it on. This allows the refrigerant to settle.
- Do not use distilled water, pure water with low TDS (Total Dissolved Solids) value, water for various beverages, warm water, or water with a high pH. Use clean, potable tap water.
- Avoid turning the ice maker upside down or tilting it more than 45 degrees during transportation or use. If this occurs, level the unit and let it stand upright for at least 2 hours before resuming operation.
- This ice maker is not a freezer. Ice produced should be used promptly or transferred to a freezer for long-term storage.
- Operate the ice maker in an environment with an ambient temperature between 50℉ (10℃) and 86℉ (30℃). Fill the water reservoir with water ranging between 46℉ (8℃) and 82℉ (28℃).
- If the ice maker will not be used for an extended period, empty the water reservoir and dry it thoroughly before storage.
2. Product Overview
The WANAI Ice Maker is a compact and efficient appliance designed for convenient ice production.
Key Features:
- Fast Ice Making: Produces 9 bullet ice cubes in 7-8 minutes, with a capacity of approximately 26.5 lbs (12 kg) of ice in 24 hours.
- Smart & Simple Operation: Features a transparent viewable window and an easy-to-operate control panel.
- User Friendly: Equipped with advanced infrared sensors to indicate "Ice Full" or "Water Shortage."
- Automatic Self-Cleaning: Simplifies maintenance with a dedicated self-cleaning function.
- Cooling System & Ultra Quiet: Efficient exhaust fan for cooling and operates at less than 40dB noise level.
Components:
- Ice Basket
- Ice Scoop
- Transparent Lid
- Control Panel
- Water Reservoir (1.2L capacity)

Figure 2.1: WANAI Countertop Portable Ice Maker Machine.

Figure 2.2: Overview of the ice maker's key performance metrics.
3. Setup Guide
- Unpack and Position: Carefully remove the ice maker from its packaging. Place it on a stable, level surface, ensuring adequate ventilation around the unit. Allow the unit to stand upright for 2-4 hours before plugging it in.
- Add Water: Open the transparent lid. Remove the ice basket. Fill the water reservoir with potable tap water up to the 'MAX' fill line. Do not overfill.

Figure 3.1: Visual guide for initial water filling and operation.
4. Operating Instructions
Follow these steps to begin making ice:
- Power On: Plug the ice maker into a grounded electrical outlet. The 'POWER' indicator light will illuminate.
- Select Ice Size: On the control panel, press the 'SELECT' button to choose between 'SMALL' or 'LARGE' ice cubes. The corresponding indicator light will illuminate.
- Start Ice Production: Press the 'ON/OFF' button to start the ice making cycle. The machine will begin producing ice. The first batch of ice is typically ready in 7-8 minutes.
- Monitor Indicators:
- The 'ADD WATER' indicator will light up when the water reservoir is low, prompting you to refill.
- The 'ICE FULL' indicator will light up when the ice basket is full, and the machine will automatically pause ice production. Remove ice to resume operation.
- Retrieve Ice: Use the provided ice scoop to remove ice from the basket.

Figure 4.1: Detailed view of the control panel and indicator lights.
Video 4.1: Demonstration of ice production, showing 9 ice cubes being made in approximately 6-8 minutes.
5. Maintenance
Regular cleaning ensures optimal performance and longevity of your ice maker.
Automatic Self-Cleaning:
- To activate the self-cleaning function, press and hold the 'ON/OFF' button for 5 seconds. The 'CLEAN' indicator light will illuminate, and the machine will begin its automatic cleaning cycle.
- After the cycle completes, drain the water from the reservoir using the bottom rubber stopper.
Manual Cleaning:
- For thorough cleaning, especially to address calcium buildup, unplug the unit and drain all water.
- Wipe down the interior with a soft cloth and a mild detergent. Rinse thoroughly with clean water.
- Ensure all components are dry before reassembling and storing or operating the unit.

Figure 5.1: Illustration of the self-cleaning process and the drain stopper location.
6. Troubleshooting
If you encounter issues with your ice maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No water in reservoir; 'ADD WATER' light on. | Fill water reservoir to the 'MAX' line. |
| Ice maker stops producing ice. | Ice basket is full; 'ICE FULL' light on. | Remove ice from the basket. |
| Water leakage. | Unit not level; drain plug not properly sealed; internal component issue. | Ensure unit is on a level surface. Check and secure the bottom drain plug. If leakage persists, contact customer support. |
| Excessive heat from unit. | Poor ventilation; normal operation. | Ensure adequate space around the unit for ventilation (especially around side vents). Some heat is normal during operation. |
| Ice cubes are small or inconsistent. | Water temperature too high; mineral buildup. | Use colder water. Perform a self-cleaning cycle or manual deep clean to remove mineral deposits. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 8.8"D x 12.6"W x 11.6"H (22.35 x 32.00 x 29.46 cm) |
| Weight | 15.4 Pounds (6.98 kg) |
| Model Number | FH-WBJ-10A |
| Capacity | 26.5 Pounds (12 kg) of ice per 24 hours |
| Water Tank Capacity | 1.2 Liters |
| Wattage | 100 watts |
| Ice Cube Shape | Bullet |
| Ice Production Time | 7-8 minutes per batch (9 cubes) |
8. Warranty and Support
WANAI values your satisfaction. Our products are backed by a 12-month warranty and lifetime technical support.
If you have any questions or require assistance with your product, please feel free to contact us via Amazon. We aim to provide a response within 24 hours.
9. Usage Scenarios
The WANAI Ice Maker is versatile and suitable for various applications:
- Chilled Drinks: Perfect for quickly chilling beverages for daily use or gatherings.
- Food Freezing: Ideal for keeping food items cold, such as fresh fish or produce.
- Ice Compress: Useful for creating ice packs for minor injuries or cooling needs.
- Fruit Smoothies: Provides fresh ice for blending delicious and refreshing smoothies.
- Parties & Picnics: Easily produce ice on demand for events, capable of making 26 lbs of ice per day.
- Home & Office Use: Its compact design makes it suitable for kitchens, home bars, and office environments.

Figure 9.1: Diverse applications of the WANAI Ice Maker.