1. Introduction
Thank you for purchasing the PARTPHONER LED Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
This modern floor lamp is designed to provide versatile lighting with three adjustable color temperatures (2700K Warm Light, 4000K Natural White, 5000K Daylight White) and features a convenient foot switch for easy operation. It is suitable for various indoor settings including living rooms, bedrooms, study rooms, and offices.
2. Safety Information
- Always disconnect the power supply before cleaning, replacing the bulb, or performing any maintenance.
- Do not operate the lamp with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
- This lamp is designed for indoor use only. Do not expose it to water or high humidity.
- Ensure the lamp is placed on a stable, level surface to prevent tipping. The heavy metal base is designed for stability.
- Use only E26 base bulbs. The included LED bulb is 9W. Do not exceed the maximum wattage rating for replacement bulbs (equivalent to 60W incandescent).
- Keep the lampshade clear of flammable materials.
3. Package Contents
Please verify that all components are present before beginning assembly:
- Lamp Base (1)
- Lamp Pole Sections (Multiple, pre-threaded)
- Lampshade Frame (Top and Bottom Rings)
- White Linen Lampshade Fabric
- E26 LED Bulb (9W, 3-color temperature)
- Foot Switch (integrated with power cord)
Image: Overview of lamp components including the solid metal base, white fabric shade, E26 base, and included bulb.
4. Setup and Assembly
Assembly of your PARTPHONER LED Floor Lamp is quick and straightforward. No tools are required.
- Assemble the Lampshade: Carefully attach the white linen fabric to the top and bottom rings of the lampshade frame. Ensure it is taut and evenly distributed.
- Screw the Lamp Pole: Starting from the top, screw the lamp pole sections together clockwise. Ensure each section is securely tightened to form a straight pole.
- Install the Pole on the Base: Thread the assembled lamp pole onto the lamp base and tighten it securely until the pole is stable and upright.
- Remove the Black Fixing Ring: Locate the lamp holder at the top of the pole. Unscrew and remove the black fixing ring from the E26 connector.
- Install the Lampshade: Place the assembled lampshade onto the lamp holder. Screw the black fixing ring back on to secure the lampshade in place.
- Install the LED Bulb: Carefully screw the included 9W E26 LED bulb into the lamp holder. Do not overtighten.
Image: Visual guide demonstrating the six steps for lamp assembly, from lampshade setup to bulb installation.
5. Operating Instructions
The PARTPHONER LED Floor Lamp is operated using a convenient foot switch located on the power cord.
Power On/Off
- Plug the lamp's power cord into a standard 110V electrical outlet.
- Step on the foot switch once to turn the lamp ON.
- Step on the foot switch again to turn the lamp OFF.
Changing Color Temperature
The included 9W LED bulb offers three distinct color temperatures. To cycle through these settings:
- With the lamp ON, quickly step on the foot switch to turn it OFF, then immediately step on it again to turn it ON.
- Each quick OFF/ON cycle will switch the color temperature in the following sequence: 2700K (Warm Light) → 4000K (Natural White) → 5000K (Daylight White).
- The lamp will remember the last selected color temperature when turned off for an extended period.
Image: Illustration of the three color temperature settings (2700K, 4000K, 5000K) and the foot pedal switch.
Image: Depiction of the lamp's ability to adjust color temperature, showcasing warm, natural, and cool light settings in a living space.
6. Maintenance
Cleaning
- Before cleaning, ensure the lamp is unplugged and completely cool.
- Wipe the metal pole and base with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- The linen lampshade can be gently dusted with a soft brush or a lint roller. For minor spots, dab with a slightly damp cloth and allow to air dry completely.
Bulb Replacement
- Ensure the lamp is unplugged and the bulb is cool before attempting to replace it.
- Unscrew the old E26 bulb counter-clockwise from the lamp holder.
- Screw in a new E26 base bulb clockwise. The lamp supports LED, CFL, or incandescent bulbs up to 60W equivalent. For continued multi-color temperature functionality, use a compatible 3-color temperature LED bulb.
7. Troubleshooting
If you encounter any issues with your lamp, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet; Bulb is loose or faulty; Foot switch malfunction. | Check if the outlet is working by plugging in another device. Ensure the plug is fully inserted. Tighten the bulb or replace it if necessary. |
| Light flickers. | Loose bulb; Incompatible bulb; Unstable power supply. | Tighten the bulb. Ensure the bulb is compatible with the lamp. Try plugging the lamp into a different outlet. |
| Cannot change color temperature. | Incorrect operation; Bulb not designed for color temperature change. | Ensure you are performing a quick OFF/ON cycle with the foot switch. Verify that the installed bulb is the original 3-color temperature LED bulb or a compatible replacement. |
| Lampshade appears crooked. | Lampshade not properly secured; Pole sections not fully tightened. | Ensure the black fixing ring is tightly screwed onto the lamp holder, securing the lampshade. Check that all pole sections are fully tightened. |
If the problem persists after trying these solutions, please contact customer support.
8. Specifications
| Brand | PARTPHONER |
| Model Name | PAFL (STR-FL-0162) |
| Product Dimensions | 9.2"D x 11.8"W x 64.1"H |
| Item Weight | 8 Pounds |
| Material | Metal and Fabric (Linen Shade) |
| Finish Type | Matte |
| Light Source Type | LED |
| Bulb Base | E26 |
| Wattage | 9 watts (Included Bulb) |
| Voltage | 110 Volts |
| Switch Type | Foot Switch |
| Room Type | Living Room, Bedroom, Study Room |
| Special Feature | Corded, 3 Color Temperature Adjustable |
9. Warranty and Support
PARTPHONER provides a 1-year warranty for this LED Floor Lamp from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
If you have any questions, require assistance with assembly, operation, or troubleshooting, or need to claim warranty service, please do not hesitate to contact PARTPHONER customer support. We are committed to providing satisfactory solutions and will respond within 24 hours.
For the most up-to-date contact information, please refer to the product packaging or the official PARTPHONER website.