BEAMNOVA Steam Cleaner User Manual

1. Introduction

Thank you for choosing the BEAMNOVA Steam Cleaner. This powerful and versatile 110V 1800W electric household steamer is designed for high-temperature and high-pressure cleaning across various surfaces. With its robust design and comprehensive accessory kit, it provides an efficient and chemical-free cleaning solution for your home, car, and more.

2. Important Safety Instructions

• Always ensure the unit is unplugged before filling or emptying the water tank.
• Exercise extreme caution when handling the steam cleaner due to high temperatures and pressure.
• Warning: The safety valve will not open in high-temperature and high-pressure environments. Allow the unit to cool down completely before attempting to open the safety valve.
• Caution: Do not add cold water directly after turning off the power. Allow the unit to cool for a few minutes to prevent damage to the fuse.
• Water vapor does not contain chemicals. For stubborn stains, add appropriate detergent to the cleaning surface, not directly into the water tank.
• Keep the appliance out of reach of children and pets.
• Do not direct steam at people, animals, or electrical appliances.
• Use only manufacturer-recommended accessories and attachments.

3. Package Contents

Verify that all items listed below are included in your package:

Image: BEAMNOVA Steam Cleaner with all included accessories, including the main unit, various brushes, nozzles, extension rods, and cloths.

• BEAMNOVA Steam Cleaner Unit (Orange)
• Main Steam Hose with Trigger Handle
• Floor Brush Head
• Floor Brush Towel Cover
• High-Pressure Nozzle
• 360° Rotating Brush
• Small Round Brushes (Brass and Nylon)
• Glass Scraper
• Ironing Brush
• Extension Rods (2)
• Measuring Cup
• Funnel
• Accessory Storage Bag
• Spare Washers
• User Manual

4. Product Features & Components

Image: The BEAMNOVA Steam Cleaner main unit in orange, connected to a long handle with a floor brush, alongside a variety of cleaning attachments.

• Main Unit: Features a 2.1L stainless steel water tank for up to 60 minutes of continuous steam. Equipped with wheels for easy mobility and a top handle for portability.
• Power Switch & Indicator: An illuminated switch indicates power status and heating.
• Steam Trigger & Lock: The handle features an automatic air spray handle with a self-locking button for continuous steam release without constant manual pressing.
• Variable Steam Control: Adjust steam intensity (Min to Max) based on cleaning needs.
• Versatile Attachments: Includes tools for various surfaces:
  • Floor Brush: For large floor and carpet areas.
  • High-Pressure Nozzle: For corners, gaps, and targeted tough stains.
  • 360° Rotating Brush: For powerful scrubbing action on various surfaces.
  • Small Brushes: Brass brushes for tough grime, nylon brushes for general scrubbing.
  • Glass Scraper: For streak-free window and glass cleaning.
  • Ironing Brush: For steaming clothes and fabrics.
  • Extension Rods: Extend reach for high places or floor cleaning without bending.

5. Setup Instructions

Follow these steps for initial setup:

1. Unscrew Safety Cap: Ensure the unit is unplugged and cool. Unscrew the safety cap counter-clockwise.
2. Fill Water Tank: Use the provided measuring cup and funnel to carefully pour clean water into the 2.1L stainless steel tank. Do not overfill.
3. Secure Safety Cap: Screw the safety cap back on clockwise until it is tightly sealed.
4. Attach Accessories: Connect the desired cleaning attachment (e.g., floor brush, high-pressure nozzle) to the main steam hose. Use extension rods if needed.
5. Plug In: Plug the power cord into a grounded 110V AC outlet.
6. Power On: Flip the power switch to the 'ON' position. The indicator light will illuminate.
7. Preheating: Allow 3-8 minutes for the unit to preheat. The indicator light will change or turn off when ready for use.

Image: Visual guide demonstrating the nine steps for easy setup and operation of the steam cleaner, from attaching accessories to starting cleaning.

6. Operating Instructions

Once the unit is preheated, you can begin cleaning:

1. Unlock Steam Trigger: Slide the steam lock button on the handle to the 'UNLOCKED' position.
2. Adjust Steam: Use the variable steam control dial on the handle to select the desired steam intensity (Min to Max).
3. Apply Steam: Press the trigger to release steam. For continuous steam, engage the self-locking button.
4. Cleaning Surfaces:
   • Floors/Carpets: Use the floor brush with or without the towel cover. Move slowly over the surface to allow steam to penetrate.
   • Hard-to-Reach Areas: Attach the high-pressure nozzle or small brushes directly to the handle or extension rods for targeted cleaning.
   • Glass/Windows: Use the glass scraper attachment. Steam the surface and then use the squeegee to remove moisture and dirt.
   • Fabrics/Clothes: Use the ironing brush with a towel cover for steaming wrinkles or disinfecting.
5. Post-Cleaning: Release the steam trigger and engage the steam lock. Turn off the power switch and unplug the unit.

Image: A collage showing the steam cleaner being used with various attachments for cleaning corners, stoves, small stains, tough stains, floors, carpets, sofas, glass, and high places.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your steam cleaner:

• Empty Water Tank: After each use, ensure the unit is cool and unplugged. Carefully open the safety cap and empty any remaining water.
• Clean Accessories: Wash towel covers and brush heads with mild soap and water. Allow them to air dry completely before storing.
• Descaling (Periodically): Depending on water hardness, mineral deposits may build up. Consult the full manual for descaling procedures using a vinegar solution or commercial descaler.
• Storage: Store the steam cleaner and all accessories in a cool, dry place, preferably in the provided storage bag.

8. Troubleshooting

Refer to these common issues and solutions:

• No Steam Output:
  • Check if the unit is plugged in and powered on.
  • Ensure the water tank is filled.
  • Allow sufficient preheating time (3-8 minutes).
  • Verify the steam trigger is unlocked and pressed.
• Safety Valve Cannot Be Opened:
  • This is a safety feature. The valve will not open under high temperature and pressure. Allow the unit to cool down completely before attempting to open.
• Water Leaking from Nozzle:
  • Ensure all attachments are securely connected.
  • Check for damaged O-rings or seals in the connections. Replace if necessary using the provided spare parts.
• Low Steam Pressure:
  • Check water level in the tank.
  • Ensure the unit has fully preheated.
  • Adjust the variable steam control to a higher setting.

9. Specifications

10. Warranty and Support

For warranty information, product support, or to purchase replacement parts, please refer to the documentation included in your product packaging or visit the official BEAMNOVA website. Keep your purchase receipt for warranty claims.