1. Welcome and Introduction
Thank you for choosing the Krups EA 877D Intuition Experience+ automatic espresso machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before first use and keep it for future reference.
The Krups EA 877D Intuition Experience+ is designed to deliver a premium coffee experience, featuring an integrated coffee grinder and a milk frother for a variety of beverages, from rich espresso to creamy lattes and cappuccinos.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, and/or injury, basic safety precautions should always be followed when using electrical appliances.
- Read all instructions before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electric shock, do not immerse cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
3. Product Overview
Familiarize yourself with the various components of your Krups EA 877D Intuition Experience+ coffee machine.
Figure 3.1: Front view of the Krups EA 877D Intuition Experience+ preparing two latte macchiatos, showing the integrated milk frother tube connected to an external milk container.
Figure 3.2: Overview of the Krups EA 877D Intuition Experience+ and its main components, including the removable water tank, drip tray, milk frother tube, and milk container.
Figure 3.3: Side view of the Krups EA 877D Intuition Experience+ illustrating its dimensions: 24 cm (9.45 inches) width, 40 cm (15.75 inches) height, and 44 cm (17.32 inches) depth.
The machine features a user-friendly interface with a touch display, a removable water tank, a bean hopper with an integrated grinder, and a removable drip tray for easy cleaning. The milk frother system allows for direct connection to a milk container for automatic milk preparation.
4. Setup and First Use
Follow these steps to set up your coffee machine for the first time.
- Unpacking: Carefully remove the machine and all accessories from the packaging. Retain packaging for future transport or storage.
- Positioning: Place the machine on a stable, flat, heat-resistant surface, away from water sources and direct sunlight. Ensure adequate ventilation around the machine.
- Initial Cleaning: Before first use, wash the water tank, drip tray, coffee grounds collector, and milk container with warm soapy water. Rinse thoroughly and dry.
- Fill Water Tank: Fill the removable water tank with fresh, cold drinking water up to the MAX level. Insert the water tank back into the machine.
- Fill Bean Hopper: Open the lid of the bean hopper and fill it with whole coffee beans. Do not use ground coffee, instant coffee, or caramelized beans.
- Power Connection: Plug the power cord into a grounded electrical outlet.
- First Rinse Cycle: The machine will prompt you to perform an initial rinse cycle. Follow the on-screen instructions to complete this process. This primes the system and cleans internal components.
5. Operating Instructions
Your Krups EA 877D Intuition Experience+ offers a variety of coffee and milk-based beverages.
5.1. Making Espresso or Coffee
Figure 5.1: Front view of the Krups EA 877D Intuition Experience+ dispensing two cups of espresso.
- Ensure the water tank is filled and the bean hopper contains coffee beans.
- Place one or two cups under the coffee spouts. Adjust the height of the spouts if necessary.
- Turn on the machine. It will perform a brief rinse cycle.
- On the touch display, select your desired coffee beverage (e.g., Espresso, Coffee, Lungo).
- You may be able to customize settings such as coffee strength, volume, and temperature via the display.
- Press the "Start" button to begin brewing. The machine will grind the beans and dispense the coffee.
5.2. Using the Milk Frother for Milk-Based Drinks
The integrated milk frother allows for automatic preparation of milk foam for lattes, cappuccinos, and more.
- Fill the milk container with fresh, cold milk.
- Connect the milk frother tube to the milk container and the designated port on the machine.
- Place a cup under the coffee spouts and the milk frother spout.
- On the touch display, select your desired milk-based beverage (e.g., Latte Macchiato, Cappuccino).
- Customize settings if prompted.
- Press the "Start" button. The machine will first dispense milk foam, then coffee, or vice versa, depending on the selected drink.
- After use, always perform the automatic milk system cleaning cycle as prompted by the machine.
6. Maintenance and Cleaning
Regular cleaning and maintenance ensure the longevity and optimal performance of your machine.
6.1. Daily Cleaning
- Drip Tray and Coffee Grounds Collector: Empty and rinse daily. These parts are typically dishwasher safe (check manual for specifics).
- Water Tank: Rinse daily and refill with fresh water.
- Milk System: After each milk preparation, perform the automatic milk system cleaning cycle. Regularly disassemble and clean the milk frother tube and container with warm soapy water.
- Coffee Spouts: Wipe with a damp cloth.
6.2. Descaling
The machine will indicate when descaling is required. Use only Krups descaling solution or a recommended alternative. Follow the on-screen instructions for the descaling program.
- Empty the water tank and drip tray.
- Pour the descaling solution into the water tank, diluted as per the descaler's instructions.
- Place a large container under the coffee spouts and milk frother.
- Start the descaling program from the machine's menu.
- Follow all on-screen prompts, which will guide you through rinse cycles.
- After the program, rinse the water tank thoroughly and refill with fresh water for final rinse cycles.
7. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause / Solution |
|---|---|
| Machine does not turn on. | Check if the power cord is securely plugged into the machine and the wall outlet. Ensure the power outlet is functional. |
| No coffee is dispensed. | Water tank empty: Fill the water tank. Coffee beans empty: Fill the bean hopper. Brewing unit clogged: Perform a cleaning cycle. |
| Coffee is too weak or too strong. | Adjust the coffee strength setting on the display. Check the grind setting (finer grind for stronger coffee). |
| Milk does not froth properly. | Milk system is dirty: Clean the milk frother tube and container thoroughly. Milk type: Use fresh, cold, full-fat milk for best results. |
| "Descale" message appears. | The machine requires descaling. Follow the descaling procedure outlined in Section 6.2. |
8. Technical Specifications
- Brand: KRUPS
- Model Number: EA877D10
- Product Dimensions (D x W x H): 17.32" x 18.5" x 11.81" (approx. 44cm x 47cm x 30cm)
- Item Weight: 19.58 pounds (approx. 8.88 kg)
- Coffee Maker Type: Espresso Machine
- Operation Mode: Semi-Automatic
- Special Features: Integrated coffee grinder, automatic milk frother
- Filter Type: Reusable
- Included Components: Milk Frother
9. Warranty and Customer Support
9.1. Warranty Information
Your Krups EA 877D Intuition Experience+ is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Krups website for detailed warranty information.
Keep your proof of purchase (receipt or invoice) as it will be required for any warranty claims.
9.2. Customer Support
If you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Krups customer support. You can typically find contact information (phone numbers, email, or online support portals) on the official Krups website or in the product packaging.
When contacting support, please have your product model number (EA877D10) and serial number (if applicable) ready.
