Lamshaw TPU Screen Protector User Manual for Mindrose H80 1.47-inch Smartwatch

1. Product Overview

This manual provides instructions for the installation and care of your Lamshaw TPU Screen Protector, designed specifically for the Mindrose H80 1.47-inch Smartwatch. This full-coverage, clear TPU film offers protection against scratches and impacts while maintaining screen clarity and touch sensitivity.

The Lamshaw TPU Screen Protector applied to a Mindrose H80 Smartwatch.

Key features of the TPU material, including anti-fingerprint coating, scratch resistance, 24-hour automatic repair, and anti-bubble properties.

The screen protector offers 99.9% Ultra-Clear HD transparency for optimal viewing.

2. Package Contents

Verify that all items are present in your package:

• 6 x Soft Screen Film (Screen Protectors)
• 1 x Squeegee
• 3 x Alcohol Cleaning Wipes (Wet & Dry)
• 1 x Microfiber Cloth

Visual representation of the items included in the package.

A closer look at the screen protector, cleaning wipes, squeegee, and microfiber cloth.

3. Installation Instructions

Follow these steps carefully for optimal application of the screen protector:

1. Clean the Screen: Use the wet wipe (labeled '1') to thoroughly clean your smartwatch screen. Follow with the dry wipe (labeled '2') to remove any moisture. Finally, use the microfiber cloth to polish the screen and remove any remaining dust or smudges.
2. Prepare the Protector: The protector has three layers. First, locate the red 'Back 1' layer and carefully peel it off.
3. Align and Apply: Carefully align the screen protector with your smartwatch screen. Once aligned, gently place it onto the screen, starting from one side and slowly laying it down.
4. Remove Bubbles: Use the provided squeegee or a card to push out any air bubbles. Start from the center and push towards the edges. If a large bubble persists, you may need to gently lift the protector and reapply that section.
5. Remove Top Layer: Finally, peel off the black 'Front 2' layer. The middle layer is the actual screen protector that remains on your device.

Note: If the middle layer seems to come off with 'Front 2', it might be due to the 'Back 1' side being stickier. In this situation, gently wrinkle the 'Back 1' layer to separate it into two layers, peel off the middle layer, and then re-align it with 'Front 2' before applying.

Visual guide for the installation process.

Carefully aligning and applying the screen protector.

Demonstration of peeling off the protective layers.

Installation Videos:

4. Maintenance

To ensure the longevity and clarity of your screen protector:

• Regularly clean the screen protector with a soft, lint-free cloth to remove dust and fingerprints.
• Avoid using harsh chemicals or abrasive materials, as these can damage the TPU film.
• If the protector gets wet, gently pat it dry with a clean cloth.

5. Troubleshooting

Bubbles After Installation:

If bubbles appear after installation, use the squeegee or a soft card to gently push them towards the nearest edge. Small bubbles may self-heal over 24 hours due to the TPU material's properties. For large, persistent bubbles, you may need to carefully lift the nearest edge of the protector and reapply, ensuring no dust is trapped underneath.

Protector Peeling Off:

Ensure the screen was thoroughly cleaned and free of dust or oils before application. Proper alignment and firm pressure during application help secure the adhesive. If peeling occurs, it may indicate improper installation or excessive exposure to moisture. Consider replacing the protector if it continues to peel.

6. Specifications

7. Warranty and Support

For any questions, concerns, or support regarding your Lamshaw TPU Screen Protector, please refer to the seller's contact information on the product packaging or the platform where it was purchased. Specific warranty details may vary by retailer.