Introduction
This manual provides essential information for the safe and efficient operation of your Xtorm XR201 Rugged Power Bank. Please read it thoroughly before using the device.
The Xtorm XR201 is a durable, IP65 water-resistant power bank with a 10,000 mAh battery, designed for outdoor use. It features multiple charging ports and an integrated flashlight.
Product Overview
Figure 1: Angled view of the Xtorm XR201 Rugged Power Bank, showing its robust orange casing and black textured surface.
Figure 2: Top view of the power bank, highlighting the Xtorm logo and four LED indicator lights.
Figure 3: Close-up view of the charging ports, including a USB-C port and two standard USB-A ports, protected by a rubber flap.
Figure 4: Angled view showing the integrated flashlight on one end of the power bank.
Setup
Initial Charging
Before first use, fully charge your Xtorm XR201 Power Bank. This ensures optimal battery performance and longevity.
- Locate the USB-C input port on the power bank. This port is typically protected by a rubber flap to maintain its IP65 water resistance.
- Connect a USB-C cable to the power bank's USB-C input port.
- Connect the other end of the USB-C cable to a compatible USB wall adapter (not included) or a powered USB port. For fastest charging, use a Power Delivery (PD) compatible charger.
- The LED indicator lights on the power bank will illuminate to show the charging progress. All four LEDs will be solid when fully charged.
- A full charge typically takes approximately 3 hours with a suitable charger.
Important: Ensure the rubber flap covering the ports is securely closed when not in use to maintain the IP65 water resistance rating.
Operating Instructions
Charging External Devices
The Xtorm XR201 can charge up to three devices simultaneously using its USB-C and two USB-A ports.
- Open the protective rubber flap covering the charging ports.
- Connect your device's charging cable to one of the available output ports on the power bank (USB-C or USB-A).
- Connect the other end of the cable to your device.
- The power bank will automatically begin charging your device. The LED indicators will show the remaining battery level of the power bank.
- When charging is complete, disconnect your device and close the rubber flap securely.
Note: The USB-C port supports Power Delivery (PD) for faster charging of compatible devices. The USB-A ports support Quick Charge 3.0.
Using the Integrated Flashlight
The power bank features a powerful integrated flashlight for convenience in low-light conditions.
- To turn the flashlight ON, press and hold the power button located on the side of the power bank for approximately 2 seconds.
- To turn the flashlight OFF, press and hold the power button again for approximately 2 seconds.
Caution: Do not shine the flashlight directly into eyes.
Checking Battery Level
To check the remaining battery level of the power bank, briefly press the power button. The LED indicators will light up:
- 4 LEDs: 75-100% charged
- 3 LEDs: 50-75% charged
- 2 LEDs: 25-50% charged
- 1 LED: 0-25% charged (recharge soon)
Maintenance
- Cleaning: Use a soft, dry cloth to clean the power bank. Do not use abrasive cleaners or solvents.
- Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the power bank to approximately 50% every 3-6 months to preserve battery health.
- Water Resistance (IP65): The power bank is IP65 water resistant, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is not designed for submersion. Ensure all port covers are securely closed when exposed to water or dust.
- Impact Protection: While rugged, avoid dropping the power bank from significant heights or subjecting it to severe impacts, as this may damage internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Cable issue, charger issue, power bank battery depleted. | Try a different USB-C cable and/or wall adapter. Ensure the power bank is connected to a working power source. |
| Device not charging from power bank | Cable issue, power bank battery depleted, device not compatible. | Ensure the power bank is charged. Try a different charging cable. Verify your device is compatible with USB charging. |
| Flashlight not turning on | Power bank battery depleted, incorrect operation. | Charge the power bank. Ensure you are pressing and holding the power button for approximately 2 seconds. |
| Slow charging | Cable quality, charger output, device input limits. | Use high-quality cables. Ensure your wall adapter provides sufficient power (e.g., PD or QC compatible). Some devices may limit charging speed. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | XR201 |
| Battery Capacity | 10,000 mAh |
| Input (USB-C) | 20W Power Delivery (PD) |
| Output (USB-C) | 20W Power Delivery (PD) |
| Output (USB-A) | Quick Charge 3.0 (x2 ports) |
| Water Resistance Rating | IP65 |
| Dimensions | 11.4 x 8.9 x 2.5 cm |
| Weight | 220 g |
| Integrated Feature | Flashlight |
Warranty and Support
For detailed warranty information and customer support, please refer to the official Xtorm website or contact their customer service directly. Warranty terms may vary by region and retailer.
Keep your proof of purchase for warranty claims.
