Introduction
Thank you for choosing the Tailcas LED Motion Sensor Night Light. This manual provides essential information for the safe and efficient use of your new night lights. Please read it thoroughly before installation and operation, and retain it for future reference.
These versatile LED night lights are designed for various indoor applications, including bedrooms, stairs, corridors, kitchens, and wardrobes. They feature motion detection, adjustable brightness, and selectable color temperatures (warm white/cool white) to enhance safety and convenience in dark environments.
Image: Tailcas LED Motion Sensor Night Lights in various applications, providing illumination in different areas of a home.
Setup and Installation
The Tailcas LED Night Lights are designed for quick and easy installation without the need for tools.
Package Contents:
- 6 x Tailcas LED Motion Sensor Night Lights
- 6 x USB Charging Cables
- 6 x Magnetic Sheets with Adhesive Tape
Installation Steps:
- Direct Magnetic Attachment: If installing on a metallic iron surface (e.g., a refrigerator), the night light can be directly adsorbed onto the surface using its built-in magnet.
- Adhesive Magnetic Sheet Installation: For non-iron surfaces (e.g., wood, plastic, painted walls):
- Clean the desired installation surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the strong adhesive tape on the magnetic sheet.
- Firmly press the adhesive side of the magnetic sheet onto the cleaned surface.
- Attach the night light to the magnetic sheet. The strong magnetic connection ensures the light remains securely in place.
Image: Illustration of the easy installation process using direct magnetic attachment or adhesive magnetic sheets.
Operating Instructions
The Tailcas LED Night Light offers three operating modes and adjustable light settings.
Mode Selection:
The night light features a toggle switch to select between three modes:
- ON Mode: The light remains continuously on. Ideal for constant illumination.
- Sensor Mode: The light automatically turns on when motion is detected in a dark environment and turns off after approximately 30 seconds of no motion. This mode conserves battery life.
- OFF Mode: The light is completely off.
Image: Visual representation of the ON, Sensor, and OFF modes, demonstrating how the sensor activates in dark conditions.
Motion Sensor Functionality:
- Detection Angle: 120 degrees
- Detection Distance: Up to 4 meters (13 feet)
- The sensor is designed to activate only in low-light conditions to prevent unnecessary activation during daylight.
Image: Demonstration of the motion sensor's 120-degree detection angle on a staircase.
Brightness and Color Temperature Adjustment:
- Color Temperature Adjustment: Short press the switch button to cycle between cool white and warm white light.
- Brightness Dimming: Long press the switch button to progressively adjust the brightness from 5% to 100%. Release the button when the desired brightness is reached.
- Memory Function: The night light retains your last brightness setting, so you do not need to readjust it each time.
Image: Instructions for adjusting light color (cool/warm) and brightness (dimmable) using the control button.
Maintenance
Charging the Battery:
The night light is equipped with a 1000mAh lithium-polymer rechargeable battery.
- Connect the provided USB charging cable to the night light's charging port and to a USB power source (e.g., computer USB interface, power bank, or USB wall adapter).
- A red indicator light will illuminate during charging.
- The red indicator light will turn off once the battery is fully charged.
- A full charge typically takes approximately 2.5 hours.
Image: Visual guide to charging the USB rechargeable night light, including battery capacity and charging status indicator.
Estimated Battery Life:
- ON Mode: Up to 10 hours of continuous use on a full charge.
- Sensor Mode: Up to 90 days of operation on a full charge (based on typical usage).
Cleaning:
To clean the night light, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
Troubleshooting
- Light does not turn on in Sensor Mode:
- Ensure the environment is sufficiently dark. The sensor will not activate in bright conditions.
- Check if the battery is charged. Recharge if necessary.
- Verify that the light is set to 'Sensor Mode'.
- Light does not stay on in ON Mode:
- Ensure the battery is fully charged.
- Verify that the light is set to 'ON Mode'.
- Motion detection is inconsistent:
- Ensure the sensor is not obstructed.
- Check the installation height and angle to ensure it covers the desired detection area.
- Avoid placing the light near heat sources or air vents, which can cause false triggers.
- Light is too dim or too bright:
- Use the long press function on the switch button to adjust the brightness to your preference.
Specifications
| Brand | Tailcas |
| Model Number | BH-K80 |
| Product Dimensions | 1.7 x 8 x 8 cm (0.67 x 3.15 x 3.15 inches) |
| Item Weight | 400 g (for the set of 6) |
| Material | Acrylonitrile Butadiene Styrene (ABS), Plastic |
| Color | White |
| Light Source Type | LED |
| Power Source | Battery Powered (USB Rechargeable) |
| Battery Type | 1 Lithium-polymer (included) |
| Battery Capacity | 1000mAh |
| Voltage | 12 Volts |
| Special Features | Dimmable, Motion Detection, Color Temperature Adjustable (Warm/Cool White) |
| Motion Detection Angle | 120 degrees |
| Motion Detection Distance | Up to 4 meters (13 feet) |
| Installation Type | Magnetic Mount (with adhesive option) |
| Energy Label | Efficacité énergétique (Energy Efficiency) (View EPREL) |
Image: EU Energy Label for the Tailcas BH-K80 LED Night Light.
Warranty and Support
Information regarding specific warranty terms and customer support contact details is not available in the provided product data. Please refer to your purchase documentation or the seller's website for warranty claims and support inquiries.
