Ultralux 6 inch - 1 Pack

Download PDF
Contents

Ultralux 6" LED Flush Mount Ceiling Light Instruction Manual

Model: 6 inch - 1 Pack

Introduction

Thank you for choosing the Ultralux 6" LED Flush Mount Ceiling Light. This dimmable, energy-efficient fixture is designed for easy installation and provides warm white 2700K illumination, boasting a lifespan of over 50,000 hours. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture.

Ultralux 6 inch LED Flush Mount Ceiling Light

Image: The Ultralux 6-inch LED flush mount ceiling light, showcasing its slim, circular design and warm white glow.

Safety Information

  • WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
  • Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
  • Ensure the supply voltage is compatible with the fixture's requirements (120V AC).
  • Do not modify or alter the fixture. Any modifications may void the warranty and create a safety hazard.
  • This fixture is suitable for indoor use and damp locations. Do not install in areas with direct water exposure unless specifically rated for wet locations.
  • Always follow local electrical codes and ordinances.

Package Contents

Verify that all components are present before beginning installation:

  • 1 x Ultralux 6" LED Flush Mount Ceiling Light Fixture
  • 2 x Mounting Screws
  • 3 x Wire Nuts
  • 1 x Optional O-Ring (for wet location installation)
Mounting Hardware Included with Ultralux LED Light

Image: Components included in the package, showing the light fixture, mounting screws, wire nuts, and an optional O-ring.

Setup and Installation

Follow these steps for proper installation of your Ultralux LED flush mount light. This fixture is designed for easy installation over standard junction boxes with 2.75" and 3.5" screw spacing.

  1. Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
  2. Prepare Wiring: Carefully pull the electrical wires from the junction box.
  3. Connect Wires:
    • Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
    • Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
    • Connect the green (ground) wire from the fixture to the bare copper or green ground wire from the junction box using a wire nut.
  4. Secure Fixture: Align the fixture's mounting holes with the screw holes on the junction box. Use the provided mounting screws to secure the fixture firmly to the junction box. If installing in a damp location, ensure the optional O-ring is properly seated between the fixture and the mounting surface for a watertight seal.
  5. Restore Power: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker or fuse box.
Integrated LED components of the Ultralux light

Image: Close-up view of the integrated LED board, highlighting the durable and efficient light source.

Operating Instructions

The Ultralux LED Flush Mount Ceiling Light is designed for simple operation.

  • Turning On/Off: Use your standard wall switch to turn the light fixture on or off.
  • Dimming Functionality: This fixture is TRIAC dimmable. To utilize the dimming feature, connect it to a compatible TRIAC dimmer switch (sold separately). Adjust the dimmer switch to achieve your desired light intensity.
TRIAC Dimmable feature with a dimmer switch

Image: Illustration of the TRIAC dimmable feature, showing compatibility with a standard dimmer switch.

Three color temperature options: Warm White, Soft White, Cool White

Image: Visual representation of different color temperatures (2700K Warm White, 3000K Soft White, 4000K Cool White) available in the product line, though this specific model is 2700K Warm White.

Maintenance

The Ultralux LED Flush Mount Ceiling Light requires minimal maintenance.

  • Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
  • Bulb Replacement: This fixture features integrated LEDs and does not require bulb replacement. The LEDs are designed for a long lifespan of over 50,000 hours.

Troubleshooting

If you encounter issues with your Ultralux LED Flush Mount Ceiling Light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power to the fixture; loose wiring connection; faulty switch or circuit breaker.Check the circuit breaker and wall switch. Verify all wire connections are secure. Consult a qualified electrician if the issue persists.
Light flickers or dims improperly.Incompatible dimmer switch; loose wiring; electrical interference.Ensure you are using a TRIAC compatible dimmer switch. Check wire connections. Consult a qualified electrician.
Light is not as bright as expected.Dimmer setting is too low; incorrect light color temperature.Adjust the dimmer to maximum brightness. Confirm the purchased model is the desired color temperature (this model is 2700K Warm White).

Specifications

FeatureDetail
BrandUltralux
Model6 inch - 1 Pack
Color Temperature2700K Warm White
MaterialAluminum
StyleModern
Light Source TypeIntegrated LED
Luminous Flux850 Lumens
DimmableYes, TRIAC Dimmable
Lifespan≥ 50,000 Hours
Installation TypeFlush Mount
Product Dimensions6 x 6 x 1 inches
Item Weight9.6 ounces
Indoor/Outdoor UsageIndoor (Suitable for Damp Locations)
CertificationsETL US Intertek, Energy Star
Technical Specifications of Ultralux LED Light

Image: A summary of technical specifications including color temperature, lumens, dimmability, warranty, wet location suitability, and lifespan.

Product dimensions: 6 inches diameter, 1 inch thickness

Image: Diagram showing the product dimensions, indicating a 6-inch diameter and 1-inch thickness.

Bathroom setting showing damp location suitability

Image: An example of the light fixture installed in a bathroom, illustrating its suitability for damp locations.

Warranty and Support

The Ultralux 6" LED Flush Mount Ceiling Light comes with a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Ultralux customer service. Refer to your purchase documentation or the Ultralux brand store on Amazon for contact information.

Note: Damage caused by improper installation, misuse, abuse, or natural disasters is not covered under warranty. Any attempt to modify or disassemble the product will void the warranty.

© 2024 Ultralux. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.