Introduction
Thank you for choosing the Yardstick Open Ear Wireless Bluetooth Headphones. This manual provides detailed instructions on how to set up, operate, and maintain your headphones to ensure optimal performance and longevity. Please read this manual carefully before using the product and retain it for future reference.
Safety Information
To ensure safe and proper use, please observe the following guidelines:
- Do not disassemble, repair, or modify the headphones.
- Keep the headphones away from extreme temperatures, humidity, and corrosive substances.
- Avoid prolonged exposure to loud volumes to prevent hearing damage.
- Be aware of your surroundings when using open-ear headphones, especially in traffic or hazardous environments.
- Keep out of reach of children and pets.

Package Contents
Please check the package for the following items:
- Yardstick Open Ear Wireless Bluetooth Headphones (1 unit)
- USB Type-C Charging Cable (1 unit)
- User Manual (1 unit)
Product Overview
The Yardstick EARDA06 headphones feature an open-ear design for comfort and situational awareness, touch controls, and a lightweight, flexible structure.

Control Layout

- LED Power Indicator: Displays battery level.
- Indicator Light: Shows device status (pairing, connected, charging).
- Microphone: For calls.
- Touch Function Keys: For various controls.
- Type-C Charging Port: For charging the device.
Setup
1. Charging the Headphones
Before first use, fully charge the headphones. Connect the provided USB Type-C charging cable to the charging port on the headphones and the other end to a USB power adapter (not included) or a computer's USB port.
- The LED power indicator will show the charging status.
- A full charge provides approximately 20 hours of music playback time and 300 hours of standby time.

2. Powering On/Off
- Power On: Press and hold the power button (refer to Figure 3 for location) for approximately 3 seconds until the indicator light flashes.
- Power Off: Press and hold the power button for approximately 5 seconds until the indicator light turns off.
3. Bluetooth Pairing
To connect your headphones to a device:
- Ensure the headphones are powered off.
- Press and hold the power button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "EARDA06" (or similar model name) from the list of found devices.
- Once connected, the indicator light will flash blue slowly.
4. Wearing the Headphones
Place the headphones over your ears with the ear hooks resting securely behind your ears. The open-ear design ensures comfort and allows ambient sound awareness.

Operating Instructions
The headphones feature intuitive touch controls for various functions:
| Function | Action |
|---|---|
| Play/Pause Music | Single tap on the touch function key. |
| Next Song | Long press the right touch function key. |
| Previous Song | Long press the left touch function key. |
| Volume Up | Short press the right touch function key. |
| Volume Down | Short press the left touch function key. |
| Answer/End Call | Single tap on the touch function key during an incoming call. |
| Reject Call | Long press on the touch function key during an incoming call. |
| Activate Voice Assistant | Triple tap on the touch function key. |

Maintenance
Cleaning
Wipe the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is dry before charging.
Storage
Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on them.
Water Resistance
The headphones are rated IP55 for water resistance, meaning they are protected against dust and low-pressure water jets from any direction. They are suitable for use during workouts and light rain, but should not be submerged in water.
Troubleshooting
If you encounter issues with your headphones, please refer to the following common solutions:
- No Power: Ensure the headphones are fully charged.
- Cannot Pair:
- Ensure Bluetooth is enabled on your device.
- Make sure the headphones are in pairing mode (indicator light flashing red and blue).
- Move the headphones closer to your device.
- Try restarting both the headphones and your device.
- No Sound:
- Check the volume level on both the headphones and your connected device.
- Ensure the headphones are properly connected to your device.
- Try disconnecting and reconnecting the Bluetooth connection.
- Poor Sound Quality:
- Ensure there are no obstructions between the headphones and your device.
- Move away from sources of strong electromagnetic interference.
Specifications
| Feature | Detail |
|---|---|
| Model | EARDA06 |
| Brand | Yardstick |
| Connectivity Technology | Bluetooth 5.3, Wireless |
| Ear Placement | Open Ear |
| Control Method | Touch Control |
| Material | Plastic |
| Special Features | Lightweight |
| Battery Life (Music Playback) | Approx. 20 hours |
| Standby Time | Approx. 300 hours |
| Water Resistance Rating | IP55 |
| Item Weight | 0.09 Kilograms (91 g) |
| Package Dimensions | 15.09 x 14.1 x 5.59 cm |
Warranty and Support
For warranty information or technical support, please contact Yardstick customer service through the retailer where the product was purchased or visit the official Yardstick website. Please have your model number (EARDA06) and purchase details ready.