MAHANCRIS BTHR1001Z

MAHANCRIS Bar Table BTHR1001Z Instruction Manual

Model: BTHR1001Z

Brand: MAHANCRIS

1. Introduction and Overview

Thank you for choosing the MAHANCRIS 47.2-Inch Rectangular Pub Table. This manual provides essential information for safe assembly, proper usage, and maintenance of your new bar table. Please read these instructions carefully before assembly and retain them for future reference.

MAHANCRIS Bar Table in a living room setting with two stools

Image: The MAHANCRIS Bar Table, a 47.2-inch rectangular pub table, shown in a living room with two matching stools, highlighting its rustic brown top and black metal frame.

2. Safety Information

WARNING:

  • Do not exceed the maximum static loading capacity of 220 lbs (100 kg).
  • Use the table only for its intended purpose of dining and entertaining.
  • Ensure the table is properly assembled according to the instructions before use.
  • Keep small parts away from children during assembly to prevent choking hazards.
  • Periodically check all screws and connections to ensure they remain tight.

3. Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • 1 x Bar Table
  • 1 x Instruction Manual
  • Assembly Guide
  • Necessary Assembly Tools (Allen wrench usually included, screwdriver recommended but not included)

4. Assembly Instructions

Assembly is straightforward and typically takes about 20 minutes with the provided instructions and clearly labeled accessories. A screwdriver is recommended for certain steps (not included).

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
  2. Identify Parts: Refer to the included assembly guide to identify each component (tabletop, metal legs, crossbars, screws, adjustable feet).
  3. Attach Legs to Tabletop: Secure the metal legs to the underside of the tabletop using the provided screws. Ensure all connections are firm but do not overtighten initially.
  4. Install Crossbars: Attach the horizontal crossbars between the legs to enhance stability. Tighten all screws once the frame is aligned.
  5. Attach Adjustable Feet: Screw the adjustable feet into the bottom of each leg. These feet help stabilize the table on uneven surfaces and protect your floors.
  6. Final Tightening: Once all components are in place, go back and securely tighten all screws.
Close-up images showing the high-quality panel, sturdy metal frame, and adjustable height feet of the bar table.

Image: Detailed views of the table's features, including the durable rustic brown panel, the robust black metal frame, and the 360-degree adjustable feet designed for stability on uneven floors.

5. Usage Guidelines

The MAHANCRIS Bar Table is designed for versatility and can be used in various settings:

  • Space-Saving Design: With dimensions of 47.2''L x 15.7''W x 35.4''H, this counter-height table is ideal for kitchens, pubs, cafes, patios, dining rooms, and living rooms, fitting well without occupying excessive space.
  • Matching Stools: It perfectly matches most standard bar stools, providing comfortable seating for up to 4 people.
  • Multi-functional: Use it as a dining table, a kitchen bar, a console table, or a workspace.
Diagram showing the dimensions of the MAHANCRIS Bar Table: 15.7 inches deep, 47.2 inches wide, and 35.4 inches high.

Image: A clear diagram illustrating the precise dimensions of the bar table, including its length, width, and height, to assist with space planning.

Video: A short product video showcasing the YATINEY 55" Long Bar Table, demonstrating its appearance and potential uses in various home settings. Note: This video is for a similar product, YATINEY, but illustrates the general concept of a long bar table.

Video: A brief product video highlighting the HOOBRO Rectangular Bar Table, showing its design and how it fits into different environments. Note: This video is for a similar product, HOOBRO, but illustrates the general concept of a rectangular bar table.

6. Maintenance

To ensure the longevity and appearance of your MAHANCRIS Bar Table, follow these maintenance guidelines:

  • Cleaning: The smooth top and clear lines make the table easy to clean. Wipe spills immediately with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the surface.
  • Protection: Use coasters for drinks and placemats for hot dishes to prevent stains and heat damage.
  • Stability Check: Periodically check and tighten all screws and connections to maintain the table's stability.
  • Avoid Excessive Weight: Do not place items heavier than the maximum weight recommendation (220 lbs / 100 kg) on the table.

7. Troubleshooting

If you encounter any issues with your bar table, consider the following common solutions:

  • Wobbling Table:
    • Check if all screws are securely tightened.
    • Adjust the leveling feet at the bottom of each leg to compensate for uneven floors.
  • Scratches/Damage:
    • For minor scratches on the rustic brown surface, furniture repair markers or waxes designed for wood finishes may help.
    • Ensure proper care as outlined in the Maintenance section to prevent future damage.
  • Missing Parts: If you find any parts missing upon unboxing, refer to the "Package Contents" section and contact customer support for assistance.

8. Specifications

FeatureDetail
BrandMAHANCRIS
Model NameBar Table
Model NumberBTHR1001Z
Product Dimensions15.7"D x 47.2"W x 35.4"H
Item Weight23 Pounds
Maximum Weight Recommendation220 Pounds (100 kg)
Frame MaterialMetal
Top Material TypeEngineered Wood
ColorRustic Brown + Black
ShapeRectangular
Seating Capacity4
Indoor/Outdoor UsageIndoor
Recommended Number of People for Assembly1
Tools Recommended For AssemblyScrew Driver
Includes All Assembly ToolsNo (Allen wrench included, screwdriver not)

9. Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase documentation or visit the official MAHANCRIS website. Keep your purchase receipt for any warranty claims.

Related Documents - BTHR1001Z

Preview MAHANCRIS BA0201/BA02701 Bar Stool Assembly Instructions
Detailed assembly instructions for MAHANCRIS BA0201/BA02701 bar stools. Includes parts list, hardware list, and step-by-step guidance for indoor use.
Preview MAHANCRIS CT151E01 Console Table Assembly Instructions
Detailed assembly instructions for the MAHANCRIS CT151E01 console table, including parts list, hardware list, and step-by-step guidance. Features a built-in charging station.
Preview MAHANCRIS ET7901 End Table Assembly Instructions
A comprehensive guide for assembling the MAHANCRIS ET7901 End Table, including detailed steps, parts list, hardware list, and important safety warnings for indoor use.
Preview MAHANCRIS Serving Bar Cart Assembly Instructions
Detailed assembly instructions for the MAHANCRIS Serving Bar Cart with Mirrored Shelf and Wheels. Includes parts list, hardware list, and step-by-step guidance for proper installation.
Preview MAHANCRIS Console Table Assembly Instructions
Comprehensive assembly instructions for the MAHANCRIS Console Table (model CTHR27601). This guide provides a parts list, hardware list, and detailed step-by-step instructions for proper setup and indoor use.
Preview MAHANCRIS User Manual: Introduction, Notes, and Safety Warnings
This user manual for the MAHANCRIS product provides essential information on its introduction, important usage notes, and critical safety warnings to ensure proper installation and operation.