Lockwood 005 Paradigm Double Cylinder Round Deadbolt User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lockwood 005 Paradigm Double Cylinder Round Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Product Features

• Constructed from high-quality stainless steel for durability.
• Features a 5-pin tumbler mechanism for enhanced security.
• Incorporates Lockwood's patented LockAlert status indicator, providing a visual cue of the lockset mode.
• Offers Secure Mode: Allows locking from both inside and outside.
• Offers Safety Mode: Allows locking from the outside while permitting free exit from the inside.
• Offers Passage Mode: Enables free entry from the outside and free exit from the inside.
• Designed for general-purpose night latch cylinder applications.
• Suitable for various domestic applications.
• Can be used in conjunction with other locks for increased security.

3. Package Contents

Verify that all components are present before beginning installation:

• 1 x Lockwood 005 Paradigm Double Cylinder Round Deadbolt, Satin Stainless Steel
• Keys (quantity may vary)
• Mounting Hardware (screws, strike plate)

4. Safety Information

Always follow these safety guidelines during installation and use:

• Wear appropriate personal protective equipment (PPE) such as safety glasses during installation.
• Ensure the door and frame are structurally sound before installing the deadbolt.
• Do not force components during installation; if parts do not fit, re-check instructions.
• Keep small parts and packaging materials away from children.
• Regularly inspect the deadbolt for signs of wear or damage.

5. Setup and Installation

This section outlines the general steps for installing the deadbolt. Specific details may vary based on your door type and existing bore holes. Professional installation is recommended if you are unsure.

5.1. Prepare the Door

Ensure the door has standard bore holes for a deadbolt (typically 2-1/8 inches for the main bore and 1 inch for the latch bore). The backset (distance from the door edge to the center of the main bore) should be compatible with the deadbolt's adjustable latch.

Image: Technical diagram illustrating the dimensions of the deadbolt components, including face diameter (63mm), cylinder projection (12mm), and adjustable backset range (32-48mm).

5.2. Install the Latch Bolt

Insert the latch bolt into the 1-inch bore hole on the edge of the door. Ensure the latch faceplate is flush with the door edge and secure it with the provided screws.

Image: Side view of the deadbolt assembly, showing the latch bolt mechanism and the faceplate. This view highlights the components that extend into the door frame.

5.3. Install the Deadbolt Cylinders

Align the exterior and interior cylinders with the main bore hole, ensuring the spindle passes through the latch mechanism. Secure the cylinders together using the through-bolts provided, tightening them evenly.

Image: Front view of the Lockwood 005 Paradigm Double Cylinder Round Deadbolt in satin stainless steel finish. The image shows the keyway and the LockAlert status indicator.

5.4. Install the Strike Plate

Mark the position of the latch bolt on the door frame when the door is closed. Chisel out a recess for the strike plate and secure it with screws. Ensure the latch bolt extends smoothly into the strike plate opening.

5.5. Test Operation

With the door open, insert a key into both cylinders and turn to extend and retract the deadbolt. Close the door and test again to ensure smooth operation and proper engagement with the strike plate.

6. Operating Instructions

The Lockwood 005 Paradigm Deadbolt offers multiple operating modes:

• Secure Mode: To lock or unlock the deadbolt from either the inside or outside, insert the key into the cylinder and turn. The LockAlert indicator will show the locked/unlocked status.
• Safety Mode: This mode allows the deadbolt to be locked from the outside using a key, while still permitting free exit from the inside without a key. This is typically achieved by a specific key turn or internal mechanism. Refer to the specific keying instructions provided with your lock for details.
• Passage Mode: In this mode, the deadbolt remains retracted, allowing free entry and exit without the need for a key. This is useful for periods when the door does not need to be secured. This mode is engaged by a specific key turn or internal mechanism.

The LockAlert status indicator provides a quick visual reference for the lock's current state (locked or unlocked).

7. Maintenance

Regular maintenance ensures the longevity and smooth operation of your deadbolt:

• Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Lubrication: Periodically apply a small amount of graphite-based lubricant or a silicone-based spray into the keyway and on the latch bolt mechanism. Do not use oil-based lubricants as they can attract dust and grime.
• Inspection: Annually check all mounting screws for tightness. Ensure the deadbolt extends and retracts smoothly without binding.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Lockwood website. For technical support or further assistance, please contact Lockwood customer service through their official channels.

Manufacturer: Lockwood