Nathan James Cohen Bar Stool Instruction Manual

Introduction

Thank you for choosing the Nathan James Cohen Mid-Century Modern Bar Stool. This manual provides essential information for the assembly, safe use, and maintenance of your new bar stool. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The Nathan James Cohen Mid-Century Modern Bar Stool in Light Brown, showcasing its design and color.

Safety Information

Please observe the following safety guidelines:

• Maximum Weight Recommendation: The maximum weight recommended for this bar stool is 300 pounds. Do not exceed this limit to prevent damage or injury.
• Ensure all parts are securely fastened before use.
• Do not stand on the stool.
• Keep small parts away from children during assembly.

Setup and Assembly

This bar stool requires assembly. An assembly guide is included with your product. Please follow the steps below for a smooth setup.

Required Tools:

• Packaging carton (as a working surface)
• Philips screwdriver

Assembly Steps:

1. Unpack all components and verify against the included parts list.
2. Lay out all parts on a soft, clean surface (e.g., the packaging carton) to prevent scratches.
3. Attach the legs to the seat frame using the provided hardware. Ensure bolts are initially loosened.
4. Attach the footrest bars between the legs.
5. Attach the woven leather backrest to the seat frame.
6. Once all components are loosely assembled, place the stool on a level surface. Apply gentle pressure to ensure all legs touch the ground evenly.
7. Gradually tighten all bolts and screws until secure. Avoid over-tightening.
8. Confirm stability before use.

Image: Diagram showing the dimensions of the Cohen Bar Stool, including height, width, and depth.

Image: Close-up view highlighting the seat features (new softer foam, woven faux leather back, Velcro secured cushion, stud details) and frame features (solid wood frame, 24" seat height, 300 lb. weight limit).

Operating Instructions

The Nathan James Cohen Bar Stool is designed for comfortable seating at counter height surfaces.

• Use the stool for seating purposes only.
• Ensure the stool is placed on a flat, stable surface before sitting.
• Do not exceed the maximum weight capacity of 300 pounds.
• The footrest is provided for comfort and support; avoid excessive force or standing on it.

Image: Several Cohen Bar Stools positioned at a kitchen island, demonstrating their intended use.

Maintenance and Care

Proper care will extend the life and appearance of your bar stool.

• Cleaning: Wipe with a dry cloth. For spills, blot immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Material: The seat is made of faux suede, and the frame is rubberwood.
• Regular Checks: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the materials.

Image: A detailed view of the upholstered faux leather seat cushion, showing its texture and stitching.

Troubleshooting

If you encounter any issues with your Nathan James Cohen Bar Stool, please refer to the following common solutions:

• Wobbling: Ensure all assembly bolts are tightened evenly. If wobbling persists, loosen all bolts slightly, place the stool on a level surface, apply gentle downward pressure, and then re-tighten all bolts.
• Loose Parts: Regularly check and tighten any loose screws or bolts.
• For any other concerns or if the issue cannot be resolved, please contact Nathan James customer support.

Specifications

Warranty and Support

Your Nathan James Cohen Bar Stool comes with a Lifetime Manufacturer Warranty.

For warranty claims, missing parts, or any product-related inquiries, please contact Nathan James customer support directly. You can typically find contact information on the manufacturer's website or through your purchase platform.

Note: This product is not recommended for commercial use.