1. Introduction
Thank you for choosing the Noaton 12058B Triton Ceiling Fan with Dimmable LED Light. This product combines a powerful ceiling fan with an integrated LED light, offering both air circulation and adjustable illumination for your living space. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Safety Instructions
Before installation and use, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician in accordance with local electrical codes.
- Mount the fan securely to a ceiling joist or a suitable support structure capable of holding the fan's weight.
- Ensure there is adequate clearance between the fan blades and any obstacles (walls, furniture) to prevent injury or damage.
- Do not insert objects into the fan blades while the fan is operating.
- This appliance is for indoor use only.
- Keep the remote control away from children.
3. Package Contents
Verify that all components are present before beginning installation:
- Noaton 12058B Triton Ceiling Fan with Integrated LED Light
- Remote Control
- 2 x AAA Batteries (for remote control)
- Mounting Hardware (screws, anchors, brackets)
- User Manual (this document)
4. Setup
4.1. Installation
The Noaton 12058B Triton is designed for rooms up to 14 m². It can be installed on flat ceilings, sloped ceilings, or even walls, provided the angle does not exceed 90 degrees. Ensure no obstacles are in the immediate vicinity of the fan blades.
- Prepare the Installation Area: Turn off power at the circuit breaker. Ensure the mounting location is structurally sound.
- Mount the Bracket: Secure the mounting bracket to the ceiling or wall using the provided hardware.
- Wire the Fan: Connect the electrical wires from the ceiling/wall to the fan's wiring according to the wiring diagram in the detailed installation guide (not included in this manual, refer to product packaging for full guide). Ensure all connections are secure.
- Attach the Fan: Carefully lift the fan and attach it to the mounting bracket. Secure it with the designated screws.
- Restore Power: Once installation is complete and all connections are checked, restore power at the circuit breaker.
4.2. Remote Control Setup
The remote control requires 2 AAA batteries, which are included in the package. Open the battery compartment on the back of the remote control and insert the batteries, ensuring correct polarity (+/-). The remote control is pre-paired with the fan.
5. Operating Instructions
The Noaton 12058B Triton is operated using the included remote control.
5.1. Fan Operation
- Power ON/OFF: Press the 'ON' or 'OFF' button on the remote to turn the fan on or off.
- Adjust Fan Speed: The fan has 3 speed settings. Use the fan speed buttons (typically indicated by fan blade icons) on the remote to cycle through the speeds.
- Quiet Operation: The fan operates at a maximum of 30 dB, making it suitable for use during sleep.
5.2. Light Operation
- Light ON/OFF: Use the dedicated light button on the remote to turn the LED light on or off.
- Adjust Brightness (Dimming): The integrated LED module is dimmable (max 48 W / 5616 lm). Use the brightness adjustment buttons (often sun icons) on the remote to increase or decrease the light intensity.
- Change Color Temperature: The light offers 3 color temperatures (3000-6000 K). Use the color temperature buttons (often 'K' or color spectrum icons) on the remote to switch between warm white, neutral white, and cool white light.
5.3. Timer Function
The fan features an adjustable timer function, allowing you to set it to automatically turn off after a specified period.
- Set Timer: Press the '1H' or '2H' button on the remote control to activate the timer for 1 or 2 hours, respectively. The fan will automatically switch off after the set time.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Noaton 12058B Triton fan.
- Cleaning: Disconnect power before cleaning. Use a soft, damp cloth to wipe down the fan housing and blades. Do not use abrasive cleaners or solvents, as these can damage the finish. The blades are made of ABS material (plastic) and are protected by a robust housing.
- Inspection: Periodically check all mounting hardware for tightness. Ensure no wires are loose or damaged.
- Bulb Replacement: The LED module is integrated and not user-replaceable. If the light fails, contact customer support.
7. Troubleshooting
If you encounter issues with your Noaton 12058B Triton, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply; Remote control batteries low/dead; Loose wiring. | Check circuit breaker; Replace remote batteries; Verify wiring connections (consult electrician). |
| Light does not turn on/dim | No power supply; Remote control batteries low/dead; Integrated LED module failure. | Check circuit breaker; Replace remote batteries; Contact customer support for LED module issues. |
| Remote control not working | Dead batteries; Obstruction between remote and fan; Remote not paired (unlikely for pre-paired units). | Replace batteries; Ensure clear line of sight; If issues persist, contact customer support. |
| Fan makes unusual noise | Loose mounting screws; Obstruction in fan blades; Motor issue. | Tighten all mounting screws; Ensure no objects are touching blades; Contact customer support if motor noise persists. |
| Settings (light color/brightness) not saved after turning off with wall switch | Product design limitation. | Always use the remote control to turn off the fan and light to retain settings. Turning off via a wall switch may reset light settings to a default (e.g., warm white). |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 12058B |
| Brand | Noaton |
| Color | White |
| Product Dimensions | 58 x 58 x 20 cm (Fan); 50L x 22W x 3H cm (Packaging/Light unit) |
| Weight | 2 kg |
| Material | Acryl (Shade), Acrylonitrile Butadiene Styrene (Blade material) |
| Power Source | Corded Electric |
| Voltage | 230 Volts |
| Light Source | LED |
| LED Wattage (Max) | 48 W |
| Luminous Flux (Max) | 5616 lm |
| Brightness | 100 Lumens (This value seems low for 48W LED, likely a typo in source data or refers to a specific setting) |
| Color Temperature | 3000-6000 K (Adjustable) |
| Fan Power Consumption (Max) | 35 W |
| Airflow (Max) | 50 m³/min |
| Noise Level (Max) | 30 dB |
| Control Method | Remote Control |
| Special Features | Dimmable, Timer Function (1h/2h) |
| Batteries for Remote | 2 AAA batteries (included) |
| EPREL Product Information | View EPREL Database Entry |
9. Warranty
Noaton products are manufactured to high-quality standards and are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or contact Noaton customer support for specific warranty terms and conditions.
10. Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Noaton customer support. Contact information can typically be found on the product packaging, the official Noaton website, or your purchase documentation.
