Armitron Men's Genuine Crystal Accented Bracelet Watch 20/5493 Instruction Manual

1. Introduction

Thank you for choosing the Armitron Men's Genuine Crystal Accented Bracelet Watch, Model 20/5493. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

2. Product Features

• Curved mineral crystal lens for enhanced durability and scratch resistance.
• Black sunray dial with silver-tone hands and markers, featuring two genuine crystals at the 12 o'clock position.
• Japanese quartz movement for accurate timekeeping.
• Silver-tone adjustable link bracelet with a fold-over clasp and double push-button safety for secure wear.
• Water resistant to 165 feet (50 meters).

3. Setup

3.1 Unboxing and Initial Inspection

Carefully remove the watch from its packaging. Inspect the watch for any visible damage or protective films. Remove any clear plastic films from the crystal, case back, and bracelet.

3.2 Bracelet Adjustment

The silver-tone link bracelet is adjustable. If the watch is too loose, links may need to be removed by a qualified jeweler or watch technician to ensure a comfortable and secure fit. Do not attempt to remove links yourself without proper tools and knowledge, as this may damage the bracelet.

4. Operating Instructions

4.1 Setting the Time

1. Pull out the crown: Locate the crown on the right side of the watch case. Gently pull the crown out to its outermost position. The second hand will stop, indicating that the watch is in time-setting mode.
2. Adjust the time: Rotate the crown either clockwise or counter-clockwise to move the hour and minute hands to the desired time.
3. Push in the crown: Once the correct time is set, push the crown back into its original, normal operating position. The second hand will resume movement.

Image: Side view of the Armitron watch, highlighting the crown used for time adjustment.

5. Maintenance

5.1 Cleaning Your Watch

To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish.

5.2 Battery Replacement

Your watch is powered by a quartz movement and requires a battery. When the watch stops or the second hand begins to skip, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure the water resistance seal is properly maintained.

5.3 Storage

When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. Keeping it in its original box or a watch case can help protect it from dust and scratches.

6. Water Resistance Guidelines

This Armitron watch is water resistant to 165 feet (50 meters). This rating generally means the watch is suitable for short periods of recreational swimming, showering, or washing hands. It is not suitable for diving, snorkeling, or prolonged submersion in water. Always ensure the crown is fully pushed in before any contact with water. Do not operate the crown while the watch is wet or submerged.

Image: Front view of the Armitron watch, displaying the dial and crystal.

7. Troubleshooting

7.1 Watch Not Running

• Check the crown: Ensure the crown is fully pushed into its normal operating position.
• Battery: The battery may be depleted. Refer to Section 5.2 for battery replacement.

7.2 Time Inaccuracy

• Reset time: Re-set the time as described in Section 4.1.
• Magnetic fields: Exposure to strong magnetic fields can affect quartz watch accuracy. Keep the watch away from magnets.
• Battery: A low battery can sometimes cause irregular timekeeping. Consider battery replacement.

7.3 Condensation Under Crystal

If condensation appears under the crystal, it indicates a breach in the water resistance. This should be addressed immediately by a professional watch repair service to prevent internal damage.

8. Specifications

Image: Back view of the Armitron watch, detailing the adjustable link bracelet and fold-over clasp.

9. Warranty and Support

For information regarding warranty coverage, service, or support for your Armitron watch, please refer to the warranty card included with your purchase or visit the official Armitron website. Contacting Armitron customer service directly will provide the most accurate and up-to-date assistance for any product-related inquiries.