1. Introduction
Thank you for choosing the Atlanta Grand Radio-Controlled Analog Alarm Clock, Model 1843/0. This alarm clock combines classic analog design with modern radio-controlled timekeeping for precise accuracy. It features an easy-to-read dial, automatic time adjustment, a crescendo alarm, snooze function, and dial illumination. Please read this manual carefully to ensure proper setup and operation.
2. Safety Information
- Keep the device away from water and moisture.
- Do not expose the clock to extreme temperatures or direct sunlight.
- Use only the specified battery type (1 x AA/LR6).
- Remove batteries if the clock will not be used for an extended period to prevent leakage.
- Dispose of used batteries responsibly according to local regulations.
- Do not attempt to open or repair the clock yourself. Refer to qualified service personnel.
3. Package Contents
- Atlanta Grand Radio-Controlled Analog Alarm Clock (Model 1843/0)
- User Manual
Note: 1 x AA/LR6 battery is not included and must be purchased separately.
4. Product Overview
Familiarize yourself with the components of your alarm clock:
Figure 1: Front View. Shows the large, easy-to-read analog dial with hour, minute, and alarm hands. The 'Atlanta' logo and 'RADIO CONTROL' indicator are visible.
Figure 2: Side View. Illustrates the alarm ON/OFF switch located on the right side of the casing.
Figure 3: Back View. Displays the battery compartment, the alarm setting knob, and the 'SET', 'REC', and 'RESET' buttons for manual time adjustments and radio signal reception.
Figure 4: Dial Illumination. Shows the clock face with the temporary backlight activated, making it readable in the dark.
5. Setup
5.1 Battery Installation
- Open the battery compartment cover on the back of the clock (refer to Figure 3).
- Insert one (1) AA/LR6 battery, ensuring the correct polarity (+ and -).
- Close the battery compartment cover securely.
5.2 Initial Time Setting (Radio Control)
After inserting the battery, the clock will automatically attempt to receive the radio time signal. This process may take a few minutes. Once the signal is received, the clock will set itself to the correct time, including automatic adjustment for daylight saving time (summer/winter time).
- Place the clock near a window for better signal reception.
- Avoid placing it near electronic devices that may cause interference.
5.3 Manual Time Setting (If Radio Signal Unavailable)
If a radio signal is not available (e.g., during travel or in areas with poor reception), you can set the time manually:
- Press and hold the 'SET' button on the back of the clock.
- While holding 'SET', rotate the time setting knob (usually located near the 'SET' button) to adjust the hour and minute hands to the desired time.
- Release the 'SET' button when the correct time is displayed.
6. Operating Instructions
6.1 Setting the Alarm Time
- Locate the alarm setting knob on the back of the clock (refer to Figure 3).
- Rotate this knob to move the small alarm hand to your desired wake-up time.
6.2 Activating/Deactivating the Alarm
- To activate the alarm, slide the alarm ON/OFF switch (refer to Figure 2) to the 'ON' position.
- To deactivate the alarm, slide the alarm ON/OFF switch to the 'OFF' position.
6.3 Crescendo Alarm Function
When the alarm is activated, the alarm sound (beep) will start softly and gradually increase in intensity and frequency, ensuring a gentle wake-up that becomes more insistent if not turned off.
6.4 Snooze Function
When the alarm sounds:
- Press the large button on the top of the clock (labeled 'SNOOZE/LIGHT').
- The alarm will pause for approximately 5 minutes and then sound again.
- You can repeat the snooze function multiple times.
- To permanently turn off the alarm, slide the alarm ON/OFF switch to the 'OFF' position.
6.5 Dial Illumination
To temporarily illuminate the clock face in the dark:
- Press the large button on the top of the clock (labeled 'SNOOZE/LIGHT').
- The dial will light up for a few seconds, allowing you to read the time (refer to Figure 4).
- The hour and minute hands also feature luminous material for visibility in low light conditions.
7. Maintenance
7.1 Cleaning
Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing or dial.
7.2 Battery Replacement
Replace the AA/LR6 battery when the clock's functions (e.g., illumination, alarm volume) become weak or stop working. Follow the battery installation steps in Section 5.1.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock does not display correct time / Time is not setting automatically. | Battery is low or incorrectly inserted. Poor radio signal reception. | Check/replace battery. Move clock to a location with better signal (e.g., near a window). Manually set the time if radio signal is consistently unavailable. |
| Alarm does not sound. | Alarm switch is in 'OFF' position. Alarm time is not set correctly. Battery is low. | Ensure alarm switch is 'ON'. Verify alarm hand position. Replace battery. |
| Dial illumination is dim or not working. | Battery is low. | Replace battery. |
9. Specifications
- Brand: Atlanta
- Model Number: 1843/0
- Color: White
- Material: Plastic
- Display Type: Analog
- Special Features: Radio-controlled time setting, Snooze function (5 minutes), Crescendo alarm, Dial illumination (press button), Luminous hands, Stable stand
- Power Source: 1 x AA/LR6 Battery (not included)
- Product Dimensions (L x W x H): 11.5 x 3.81 x 11.5 cm (approximately 4.5 x 1.5 x 4.5 inches)
- Item Weight: 140 g (approximately 4.9 oz)
10. Warranty and Support
For warranty information or technical support, please refer to the retailer where you purchased the product or visit the official Atlanta brand website. Keep your proof of purchase for any warranty claims.
