IINE Wireless Pro Controller Instruction Manual

1. Introduction

This manual provides detailed instructions for the IINE Wireless Pro Controller, designed for use with Nintendo Switch, Switch OLED, and Switch Lite consoles. Please read this manual carefully before use to ensure proper operation and to maximize your gaming experience.

Image 1: The IINE Wireless Pro Controller, featuring a gold and green design with various buttons and joysticks.

2. Package Contents

Please check the package contents upon unboxing to ensure all items are present:

• 1 x IINE Wireless Pro Controller
• 1 x USB-C Charging Cable
• 1 x Instruction Manual (this document)

Image 2: Visual representation of the controller and its packaging, indicating the included items.

3. Controller Layout

Familiarize yourself with the buttons and features of your IINE Wireless Pro Controller:

• Left Analog Stick: For movement and camera control.
• Right Analog Stick: For camera control and aiming.
• Directional Pad (D-Pad): For menu navigation and specific in-game actions.
• A/B/X/Y Buttons: Action buttons.
• L/R Buttons: Shoulder buttons.
• ZL/ZR Buttons: Trigger buttons.
• Minus (-) Button: Select/Back button.
• Plus (+) Button: Start/Pause button.
• Home Button: Returns to the Switch Home menu.
• Screenshot Button: Captures screenshots.
• Turbo (T) Button: Activates/deactivates Turbo function.
• NFC Sensor: For Amiibo functionality (located near the center of the controller).
• USB-C Port: For charging and wired connection.
• Indicator Lights: Display connection status and battery level.

4. Setup and Connection

4.1 Initial Pairing with Nintendo Switch

1. On your Nintendo Switch console, go to the HOME Menu.
2. Select "Controllers" > "Change Grip/Order".
3. While on the "Change Grip/Order" screen, press and hold the Home button on the IINE Pro Controller for 3-5 seconds until the indicator lights start flashing rapidly.
4. Once the controller is successfully paired, the corresponding player indicator light(s) on the controller will remain solid.

4.2 Reconnecting to Nintendo Switch

If the controller has been previously paired, simply press the Home button to wake it up. It will automatically attempt to reconnect to the last paired Switch console.

4.3 Wired Connection

You can connect the controller to your Nintendo Switch dock using the provided USB-C cable. Ensure "Pro Controller Wired Communication" is enabled in the Switch System Settings (System > Controllers and Sensors > Pro Controller Wired Communication).

4.4 PC Steam Connection

The controller also supports PC Steam. Connect the controller to your PC via the USB-C cable. Your PC should recognize it as a gamepad. You may need to configure controller settings within Steam's Big Picture Mode or specific game settings.

Image 3: The controller shown alongside various Nintendo Switch models and a PC monitor, illustrating its broad compatibility.

5. Operating Instructions

5.1 Wake Up Function

When the Switch console is in sleep mode, press the Home button on the controller to wake up the console and automatically reconnect the controller.

5.2 Turbo Function

The Turbo function allows for rapid, automatic pressing of a button. It supports both auto-fire and manual fire dual modes.

• To set Manual Turbo: Press and hold the T button, then press any of the A/B/X/Y/L/R/ZL/ZR buttons once. The button will now activate Turbo when held down.
• To set Auto Turbo: Press and hold the T button, then press the desired A/B/X/Y/L/R/ZL/ZR button twice. The button will now continuously activate Turbo without needing to be held.
• To cancel Turbo for a specific button: Press and hold the T button, then press the desired A/B/X/Y/L/R/ZL/ZR button a third time.
• To cancel all Turbo functions: Press and hold the T button for 5 seconds.

Image 4: Diagram illustrating the button combinations for setting and canceling the Turbo function on the controller.

5.3 Vibration Adjustment

The controller features dual vibration feedback with 5 adjustable levels (0%, 30%, 50%, 70%, 100%).

• To adjust vibration intensity: Press and hold the T button, then press the Directional Button Up to increase vibration or Directional Button Down to decrease vibration.
• The default vibration level is 50%.

Image 5: Graphic showing the T button and directional buttons used to adjust the vibration intensity, with a scale from 0% to 100%.

5.4 RGB Light Adjustment

The controller features RGB lighting around the analog sticks, which can be customized.

• To change monochromatic light color: Press and hold the T button, then press the Left Analog Stick (L3) once. Repeat to cycle through colors.
• To activate colorful light mode: Press and hold the T button, then double-press the Left Analog Stick (L3).
• To adjust brightness: Press and hold the T button, then press the Right Analog Stick (R3) to adjust brightness levels.

Image 6: Instructions for changing the RGB light color and adjusting brightness using the T button and analog stick presses.

5.5 NFC/Amiibo Function

The controller supports NFC functionality for scanning Amiibo figures and cards.

• Ensure the NFC function is enabled in your game or Switch system settings.
• Place your Amiibo figure or card over the NFC sensor area, typically located near the center of the controller, between the analog sticks.
• The console will register the Amiibo data.

Image 7: Graphic highlighting the NFC area on the controller, indicating support for Amiibo scanning.

5.6 Motion Control (6-Axis Gyro)

The built-in 6-axis gyroscope provides precise motion control for compatible games, enhancing gameplay through features like visual angle adjustment, direction control, and aim shooting.

Image 8: Illustrations demonstrating the 6-axis gyro functionality for visual angle adjustment, direction control, and aim shooting in games.

6. Charging the Controller

The controller is equipped with a 600mAh high-capacity rechargeable battery.

• Connect the provided USB-C charging cable to the USB-C port on the controller.
• Connect the other end of the cable to a USB power source (e.g., Nintendo Switch dock, USB wall adapter, computer USB port).
• The indicator lights on the controller will show charging status. They will typically blink while charging and turn solid or off when fully charged.
• A full charge usually takes approximately 2-3 hours.

7. Maintenance

• Keep the controller dry and away from moisture.
• Avoid exposing the controller to extreme temperatures.
• Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Store the controller in a safe place to prevent damage from drops or impacts.

8. Troubleshooting

• Controller does not connect:
  • Ensure the controller is charged.
  • Repeat the initial pairing process (Section 4.1).
  • Ensure the Switch console is updated to the latest firmware.
  • Try connecting the controller via USB-C cable to the Switch dock.
  • Reset the controller by inserting a thin object into the small reset hole (if present, usually on the back).
• Buttons or joysticks are unresponsive:
  • Check if the controller is properly connected.
  • Test the controller in Switch's "Calibrate Control Sticks" or "Test Input Devices" settings.
  • Ensure no debris is obstructing the buttons or sticks.
• Vibration is not working:
  • Check the vibration adjustment settings (Section 5.3) to ensure it's not set to 0%.
  • Verify that the game you are playing supports vibration feedback.
• NFC/Amiibo not detected:
  • Ensure the Amiibo is placed correctly over the NFC sensor.
  • Verify that the game or Switch system settings have NFC enabled.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the official IINE website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the IINE Store on Amazon: IINE Official Store