Introduction
Thank you for choosing the Aprxuvot 2.0 Cubic Feet Home Safe. This safe is designed to provide secure storage for your valuable documents, money, firearms, and other personal items. Featuring a robust metal construction, digital keypad, and multiple access methods, it offers reliable protection against theft. Please read this manual carefully before setting up and operating your safe to ensure proper use and maximum security.
Package Contents
Before you begin, please verify that all items listed below are included in your package:
- Aprxuvot 2.0 Cubic Feet Home Safe
- Emergency Keys (2)
- Mounting Bolts (4)
- Expansion Plugs (4)
- External Battery Box
- Removable Shelf
- Floor Mat
- User Manual (this document)
Setup and Installation
Initial Setup (First Opening & Battery Installation)
- Locate the emergency keyhole, usually concealed behind the keypad cover or a small emblem.
- Insert one of the emergency keys into the keyhole and turn it clockwise while simultaneously turning the knob on the safe door clockwise to open the safe.
- Inside the safe, locate the battery compartment on the back of the door. Insert 4 AA batteries (not included), ensuring correct polarity.
- Once batteries are installed, the safe is ready for programming. Keep the door open during initial programming.
Mounting Options
For enhanced security, the safe can be bolted to a wall or floor using the pre-drilled holes and included mounting hardware.
- Choose a suitable location for mounting, ensuring it is a solid surface.
- Place the safe in the desired position and mark the drilling points through the pre-drilled holes on the back or bottom of the safe.
- Drill pilot holes at the marked points using an appropriate drill bit for your wall/floor material.
- Insert the expansion plugs into the drilled holes.
- Align the safe with the holes and secure it using the provided mounting bolts. Tighten firmly.
Operating Instructions
Opening the Safe
Your safe offers three methods of entry:
- Method 1: Digital Passcode
Enter your 3 to 8 digit passcode on the keypad, then press the '#' or '*' key to confirm. The display will show 'OPEN' and you can turn the knob clockwise to open the door. - Method 2: Emergency Key
This method is primarily for the first-time operation, forgotten passcodes, or dead batteries. Insert the emergency key into the keyhole and turn it clockwise while simultaneously turning the knob clockwise to open the door. - Method 3: External Battery Box
If the internal batteries are dead and you do not have the emergency key readily available, connect the external battery box to the port on the keypad. This will power the keypad, allowing you to enter your digital passcode and open the safe.
Setting/Changing Your Passcode
- With the safe door open, locate the reset button on the side of the battery box inside the safe.
- Press the reset button. The keypad will beep, indicating it's ready for a new code.
- Enter your desired 3 to 8 digit passcode.
- Press the '#' or '*' key to confirm. The safe will beep twice to confirm the new code has been accepted.
- Test the new passcode with the door open before closing it to ensure it works correctly.
Using the Removable Shelf
The safe includes a removable shelf to help organize your items. You can adjust its position or remove it entirely based on your storage needs.
- To install: Slide the shelf into the desired grooves inside the safe.
- To remove: Gently lift the shelf and slide it out of the grooves.
Maintenance
- Battery Replacement: When the batteries are low, the keypad display may indicate 'LO-BAT' or the lights may dim. Replace all 4 AA batteries promptly to ensure continuous operation. Always use new, high-quality alkaline batteries.
- Cleaning: Clean the exterior of the safe with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Key Storage: Store emergency keys in a secure location away from the safe itself, but where they can be accessed in an emergency.
Troubleshooting
- Safe does not open with passcode:
- Ensure batteries are not low or dead. Replace if necessary.
- Verify you are entering the correct passcode. Try resetting the passcode (refer to 'Setting/Changing Your Passcode').
- Ensure you press '#' or '*' after entering the passcode. - Keypad is unresponsive:
- Check battery installation and polarity. Replace batteries if needed.
- If batteries are dead, use the external battery box to power the keypad. - Door does not close properly:
- Check for any obstructions preventing the door from closing fully.
- Ensure the locking bolts are fully retracted before attempting to close. - Safe makes unusual noises:
- If you hear grinding or unusual sounds, do not force the mechanism. Contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Aprxuvot |
| Model Number | SAFE BOX |
| Capacity | 2.0 Cubic Feet |
| Exterior Dimensions (H x W x D) | 17.71" x 14.96" x 12.2" |
| Interior Dimensions (H x W x D) | 17.5" x 14.7" x 12" |
| Item Weight | 34.17 pounds |
| Lock Type | Electronic Combination Lock, Key Control |
| Material | Metal |
| Special Features | Sensor Light, Anti-Theft, Removable Shelf, Fireproof, Water Resistant |
| Mounting Type | Floor Mount, Wall Mount |
Safety Information
- Do not store emergency keys inside the safe.
- Keep the safe out of reach of children to prevent unauthorized access.
- Regularly check the battery level and replace batteries as needed to avoid being locked out.
- Ensure the safe is securely mounted if you choose to install it to a wall or floor.
Warranty and Support
Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's website for specific warranty terms and support options.
