1. Introduction
Thank you for choosing the Vistefly V12 Pro Cordless Stick Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.
2. Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance:
- Read all instructions before using the appliance.
- Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer's recommended attachments.
- Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up toxic material, such as chlorine bleach, ammonia, or drain cleaner.
- Do not use without dust cup and/or filters in place.
- Turn off all controls before unplugging.
- Store your appliance indoors in a cool, dry area.
- Use only the charger supplied by the manufacturer to recharge.
3. Package Contents
Carefully unpack your Vistefly V12 Pro and ensure all components are present and undamaged. Refer to the diagram below for identification of parts.

Image: Exploded view of the Vistefly V12 Pro showing all included parts and accessories. These include the motorized brush, main body, telescopic tube, 2-in-1 brush, long flat suction tool, adapter, battery, cleaning gadget, two HEPA filters, wall mount, and user manual.
- Motorized Brush
- Main Body (with dustbin and motor)
- Telescopic Tube
- 2-in-1 Brush
- Long Flat Suction Tool
- Power Adapter
- Detachable Battery
- Cleaning Gadget
- HEPA Filters (x2)
- Wall Mount
- User Manual
4. Assembly & Setup
Follow these steps to assemble and prepare your vacuum cleaner for first use.
4.1 Assembling the Vacuum
- Attach the Telescopic Tube: Insert the telescopic tube into the main body until it clicks securely into place.
- Attach the Motorized Brush: Connect the motorized brush head to the other end of the telescopic tube until it clicks.
- Install the Battery: Slide the detachable battery into the slot on the main body until it locks.

Image: The Vistefly V12 Pro vacuum cleaner fully assembled, shown alongside its wall-mounted charging dock and spare filters.
4.2 Adjusting Length
The telescopic tube allows for adjustable length to suit different cleaning needs and user heights.
- Press the release button on the telescopic tube.
- Extend or retract the tube to your desired length (e.g., 91cm or 114cm).
- Release the button to lock the tube in place.

Image: A close-up illustrating how to adjust the length of the vacuum's telescopic tube, showing two possible lengths: 91cm and 114cm.
4.3 Charging the Battery
Before first use, fully charge the battery. The battery can be charged while attached to the vacuum or separately.
- Wall Mount Charging: Install the wall mount in a convenient location. Hang the vacuum on the mount and connect the power adapter to the charging port on the main body.
- Separate Battery Charging: Remove the battery from the vacuum. Connect the power adapter directly to the battery's charging port.
The LED screen will display the charging status. A full charge typically takes 4-5 hours.

Image: Two charging methods for the Vistefly V12 Pro: the vacuum mounted on its wall dock and the detachable battery charging independently on a surface.
5. Operating Instructions
5.1 Powering On/Off and Suction Modes
The V12 Pro features an intuitive LED touch screen for control and monitoring.

Image: A detailed view of the Vistefly V12 Pro's LED touch screen, displaying battery percentage, current suction mode (Eco, Boost, Max, Auto), and controls.
- Power On/Off: Press the power button on the handle to turn the vacuum on or off.
- Mode Selection: Use the '+' and '-' buttons on the LED screen to cycle through suction modes: Eco, Boost, and Max.
- Auto Mode: The vacuum can automatically adjust suction power based on detected dirt levels. Select 'AUTO' on the screen for this feature.
The LED screen provides real-time information:
- Battery charge percentage
- Current suction power/mode
- Low battery alarm
- Error codes for maintenance
5.2 Runtime Information
The V12 Pro is equipped with a 2500 mAh detachable battery, offering varying runtimes depending on the selected mode:

Image: An illustration detailing the Vistefly V12 Pro's 7*2500mAh detachable battery and its corresponding runtimes for Auto, Eco, Boost, and Max modes.
- Auto Mode: Up to 60 minutes
- Eco Mode: Up to 50 minutes
- Boost Mode: Up to 32 minutes
- MAX Mode: Up to 18 minutes
5.3 Intelligent Dust Detection
In Auto mode, the vacuum's intelligent dust detection system automatically adjusts suction power (from 11 KPa to 30 KPa) based on the amount of dirt detected on the surface. This optimizes cleaning efficiency and battery life.

Image: A visual representation of the Vistefly V12 Pro's intelligent dust detection, showing how suction power dynamically increases or decreases based on the detected quantity of dust.
5.4 Using Attachments
The V12 Pro comes with various attachments for versatile cleaning.

Image: The Vistefly V12 Pro cordless vacuum cleaner being used on a hard floor, demonstrating its powerful 450W brushless motor and 30000Pa suction.

Image: The Vistefly V12 Pro vacuum cleaner effectively cleaning both hard floors and carpets, highlighting its versatility for multiple surface types.

Image: A display of the Vistefly V12 Pro's versatile accessories, including the motorized multi-function brush, long flat suction tool, and 2-in-1 brush, suitable for various cleaning tasks.
- Motorized Brush: Ideal for hard floors and carpets, featuring LED headlights for improved visibility in dark areas.
- 2-in-1 Brush: Use for upholstery, curtains, and delicate surfaces.
- Long Flat Suction Tool: Perfect for narrow gaps, corners, and car interiors.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
6.1 Emptying the Dustbin
Empty the dustbin regularly, especially when the 'MAX' line is reached, to maintain strong suction.
- Hold the main body over a trash can.
- Press the dustbin release button to open the bottom flap and empty the contents.
- Close the flap securely.

Image: A hand pressing a button to release the contents of the Vistefly V12 Pro's dustbin directly into a trash receptacle, illustrating easy emptying.
6.2 Cleaning the Filtration System
The V12 Pro features a 6-layer high-efficiency filtration system. Clean filters regularly to prevent clogging and maintain suction power.

Image: A detailed diagram illustrating the Vistefly V12 Pro's 6-stage high-efficiency filtration system, including pre-treatment, HEPA, cyclone, stencil, sponge, and outlet filtration.
- Disassemble: Twist and pull to remove the dustbin and filter components from the main body.
- Clean Filters: Tap out loose dirt from the HEPA filter and cyclone assembly. Rinse washable components (dust cup, metal filter, sponge filter) under running water. Do not wash the HEPA filter unless specified by the manufacturer.
- Dry Thoroughly: Ensure all washed parts are completely dry before reassembling. This can take up to 24 hours.
- Reassemble: Reinsert the filters and dustbin, ensuring they are securely locked.
6.3 Cleaning the Brush Head
The motorized brush head is designed to be anti-tangle, but occasional cleaning may be necessary.

Image: A side-by-side comparison showing the Vistefly anti-tangle brush design on the right, which minimizes hair wrapping, versus a traditional brush on the left with significant hair entanglement.
- Turn off the vacuum and detach the brush head.
- Use the provided cleaning gadget or scissors to carefully remove any tangled hair or debris from the brush roll.
- Wipe the brush head casing with a dry cloth.
6.4 Battery Care
- Always use the original charger.
- Do not expose the battery to extreme temperatures.
- If the vacuum will not be used for an extended period, store the battery partially charged in a cool, dry place.
7. Troubleshooting
If you encounter issues with your Vistefly V12 Pro, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | Battery is not charged or not properly installed. | Ensure battery is fully charged and securely inserted. |
| Low suction power | Dustbin is full; Filters are clogged; Brush roll is tangled; Blockage in tube/hose. | Empty dustbin. Clean filters. Remove tangled hair from brush roll. Check for and clear any blockages. |
| Brush roll not spinning | Brush roll is tangled; Brush head is not properly attached; Obstruction. | Clean brush roll. Reattach brush head securely. Remove any obstructions. |
| Vacuum stops suddenly | Battery is depleted; Overheating protection activated. | Recharge battery. Allow vacuum to cool down for at least 30 minutes before resuming use. |
| LED screen displays error code | Specific internal issue. | Refer to the LED screen's specific error code for detailed instructions, or contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Vistefly |
| Model Number | V12 Pro |
| Color | Silver |
| Power | 450 Watts |
| Suction Power | Up to 30,000 Pa |
| Voltage | 450 Volts |
| Dustbin Capacity | 1 Liter |
| Battery Type | Lithium-ion (7x 2500 mAh) |
| Max Runtime | 60 minutes (Auto Mode) |
| Charging Time | 4-5 hours |
| Filtration System | 6-layer (including HEPA) |
| Features | Cordless, LED Touch Screen, Intelligent Dust Detection, LED Headlights, Detachable Battery |
| Surface Recommendation | Hard Floor, Carpet |
| Item Weight | 4.06 Kilograms |
| Package Dimensions | 43 x 29.7 x 19.6 cm |
9. Warranty & Support
Vistefly is committed to ensuring customer satisfaction. Your V12 Pro vacuum cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For any questions, technical assistance, or warranty claims, please contact Vistefly customer service. Our professional support team is available to assist you.
Contact Information: (Please refer to your product packaging or Vistefly's official website for the most current contact details.)