JBL Vibe Beam True Wireless Earbuds User Manual

1. Introduction

The JBL Vibe Beam True Wireless Earbuds are designed to deliver high-quality audio with deep bass, offering up to 32 hours of battery life. These earbuds feature a secure, comfortable stick-closed design and are resistant to splash and dust, making them suitable for various daily activities.

Key Features:

• JBL Deep Bass Sound: Experience rich, high-quality audio with 8mm drivers.
• Comfortable Fit: Ergonomic, stick-closed design for extended wear.
• Extended Battery Life: Up to 32 hours total (8 hours in earbuds + 24 hours with charging case).
• Speed Charging: Get an additional two hours of playtime with just 10 minutes of charging.
• Hands-free Calls with VoiceAware: Manage calls with clear audio and control your voice feedback.
• Water and Dust Resistant: IP54-certified earbuds and IPX2 charging case for durability.

2. What's in the Box

Upon unboxing your JBL Vibe Beam earbuds, you will find the following components:

• 1 x JBL Vibe Beam earbuds
• 1 x Charging case
• 1 x Type-C to Type-A charging cable
• 3 sizes of eartips (small, medium, large)
• 1 x Quick Start Guide / Safety Sheet
• 1 x Warranty / Warning

The image above displays the JBL Vibe Beam earbuds nestled within their mint-colored charging case, ready for use.

3. Setup

3.1. Fitting the Earbuds

For optimal sound quality and comfort, select the eartips that best fit your ears. The JBL Vibe Beam comes with three different sizes of eartips. Experiment with each size to find the most secure and comfortable fit.

This image shows the individual JBL Vibe Beam earbuds, emphasizing their design and the interchangeable eartips.

3.2. Bluetooth Pairing

1. Open the charging case. The earbuds will automatically enter pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth.
3. Select "JBL Vibe Beam" from the list of available Bluetooth devices.
4. Once connected, a confirmation sound will play, and the LED indicator on the earbuds will change.

4. Operating Instructions

4.1. Touch Controls

The JBL Vibe Beam earbuds feature customizable touch controls for managing playback, calls, and voice assistant activation. Refer to the Quick Start Guide for detailed touch gesture configurations.

This image provides a clear view of the individual earbuds, showcasing their form factor and the subtle JBL branding.

4.2. JBL Headphones App

Enhance your listening experience by downloading the JBL Headphones app. The app allows you to:

• Customize your sound with the JBL Equalizer.
• Activate and manage Active Noise Cancellation (ANC) modes.
• Adjust VoiceAware for hands-free calls.
• Switch between audio and video modes for optimized latency.

The image illustrates the user interface of the JBL Headphones app, specifically showing the customizable equalizer feature.

4.3. Noise Control

The earbuds feature Passive Noise Cancellation to reduce external sounds, enhancing your audio experience. Utilize the JBL Headphones app to further manage noise control settings, including ambient sound modes if available.

This image depicts a person wearing the JBL Vibe Beam earbuds, conveying the immersive audio experience provided by the Deep Bass Sound.

5. Charging

The JBL Vibe Beam earbuds offer impressive battery performance:

• Earbud Playtime: Up to 8 hours on a single charge.
• Total Playtime with Case: Up to 32 hours (8 hours from earbuds + 24 hours from charging case).
• Speed Charge: A quick 10-minute charge provides an additional 2 hours of playtime.

To charge the earbuds, place them back into the charging case. To charge the case, connect the provided Type-C to Type-A charging cable to the USB-C port on the case and a power source.

The graphic highlights the total battery life of 32 hours, combining the earbuds' charge with that of the charging case, and illustrates the quick charge feature.

6. Maintenance

The JBL Vibe Beam earbuds and charging case are designed for durability:

• Earbuds: IP54 certified for water and dust resistance. This means they are protected against dust ingress and splashing water from any direction.
• Charging Case: IPX2 certified for water resistance. This means it is protected against dripping water when tilted up to 15 degrees.

To ensure longevity, keep the charging contacts clean and dry. Avoid submerging the earbuds or case in water. After exposure to water or dust, ensure the device is completely dry before charging.

This image showcases the earbuds with text indicating their comfortable fit, a crucial aspect for extended use during various activities.

7. Troubleshooting

If you encounter issues with your JBL Vibe Beam earbuds, consider the following:

• No Sound: Ensure earbuds are charged and properly paired with your device. Check volume levels on both the earbuds and your device.
• Connection Issues: Try unpairing and re-pairing the earbuds. Ensure no other Bluetooth devices are interfering.
• Charging Problems: Verify the charging cable is securely connected and the power source is active. Clean the charging contacts on both the earbuds and the case.
• Poor Fit/Sound Quality: Experiment with different eartip sizes to achieve a better seal in your ear canal.

For persistent issues, consult the full user manual available on the JBL support website or perform a factory reset as per the Quick Start Guide.

8. Specifications

9. Product Overview Video

This official product video provides a visual overview of the JBL Vibe Beam earbuds, showcasing their design, key features, and usage scenarios.

10. Warranty and Support

The JBL Vibe Beam earbuds come with a manufacturer's warranty. For specific warranty details, please refer to the Warranty / Warning sheet included in your product packaging or visit the official JBL support website. For further assistance, technical support, or service inquiries, please contact JBL customer service.

You can find additional information and support resources on the JBL Store on Amazon.