1. Introduction
The Furrion Chill HE RV Roof Air Conditioner is engineered to provide stable temperature control, improved running efficiency, and reduced operating noise for recreational vehicles. This 15,000 BTU unit features dual-fan technology for enhanced cooling performance and energy efficiency. Its lightweight, aerodynamic design minimizes wind resistance, contributing to better fuel efficiency during travel. Constructed with Vibrationsmart and Climatesmart technologies, the unit is built to withstand challenging road conditions and diverse environments.
Figure 1: Furrion Chill HE RV Roof Air Conditioner, 15K BTU, White.
Key Features:
- Superior Performance: Dual-fan technology moves cool air faster and more efficiently, providing 15,000 BTUs of cooling power.
- High Capacity & Efficiency: Offers 50% higher cooling capacity and 40% more energy efficiency compared to industry standards, operating 50% quieter than single-fan models.
- Durable Design: Incorporates Vibrationsmart and Climatesmart technologies for resilience against tough road conditions. A thermal-insulated shroud protects internal components from water, heat, UV rays, and debris.
- Lightweight & Aerodynamic: Designed to reduce drag and wind resistance, enhancing RV performance and fuel efficiency.
- Easy to Install: Features a simple bolt-on installation process with a comprehensive step-by-step guide.
2. Setup and Installation
The Furrion Chill HE RV AC unit is designed for straightforward installation. It mounts with a simple bolt-on process. A complete system requires the air conditioner unit, a compatible thermostat, an air distribution box (ADB), and a controller, all sold separately. Conversion kits are available for upgrading from other brands.
Installation Overview:
- Ensure all necessary components (AC unit, thermostat, ADB, controller) are acquired.
- Carefully position the rooftop AC unit according to the provided step-by-step installation guide.
- Secure the unit using the bolt-on mechanism.
- Connect the internal air distribution box and thermostat/controller.
- Verify all electrical connections are secure and conform to safety standards.
Video 1: An overview of the Furrion CHILL Rooftop Air Conditioner, highlighting its features and installation process. This video is provided by Furrion, the seller.
Video 2: A detailed look at the Furrion Chill HE, demonstrating its design and functionality. This video is provided by Lippert Components, Inc., a seller of Furrion products.
3. Operating Instructions
The Furrion Chill HE system is operated via a compatible thermostat and air distribution box (ADB). Ensure the system is properly powered before operation.
Basic Operation:
- Power On/Off: Use the power button on your thermostat or ADB to turn the unit on or off.
- Mode Selection: Select desired mode (Cool, Fan Only, Dry/Dehumidify) using the mode button.
- Temperature Adjustment: Adjust the desired temperature using the up/down arrows on the thermostat.
- Fan Speed: Choose fan speed (Low, Medium, High, Auto) to optimize airflow and noise levels.
Figure 2: Interior air distribution box, illustrating the dual-fan system for superior performance.
4. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Furrion Chill HE RV Air Conditioner.
Recommended Maintenance:
- Filter Cleaning: Periodically clean or replace the air filters in the air distribution box to maintain optimal airflow and cooling efficiency.
- Exterior Inspection: Regularly inspect the rooftop unit for any debris, leaves, or obstructions that may hinder airflow. Ensure the thermal-insulated shroud is intact and free from damage.
- Coil Cleaning: If accessible and comfortable, gently clean the condenser and evaporator coils to remove dirt and dust buildup. Consult a professional if unsure.
- Electrical Connections: Annually check all electrical connections for tightness and signs of corrosion.
Figure 3: The durable thermal-insulated shroud protects internal components from environmental elements.
5. Troubleshooting
If you encounter issues with your Furrion Chill HE RV Air Conditioner, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not turning on | No power, tripped breaker, faulty thermostat. | Check RV power supply, reset breaker, ensure thermostat is correctly set. |
| Insufficient cooling | Dirty air filters, blocked condenser coils, low refrigerant. | Clean/replace filters, clear obstructions from coils, contact qualified technician for refrigerant check. |
| Excessive noise | Loose components, fan obstruction, motor issues. | Inspect for loose parts, remove fan obstructions, contact service if motor noise persists. |
| Water leakage | Clogged drain pan/hose, improper installation. | Clear drain, verify proper sealing and leveling of the unit. |
Video 4: A seller's review highlighting the quiet operation and efficiency of the Furrion Chill HE AC unit. This video is provided by Lavish Luxe, a seller.
6. Specifications
Detailed technical specifications for the Furrion Chill HE RV Roof Air Conditioner (Model FACR15HESA-PS-AM):
Figure 4: Technical specifications including dimensions (34.875" x 13.5") and 15K BTU capacity.
| Feature | Detail |
|---|---|
| Manufacturer | Furrion |
| Model Number | FACR15HESA-PS-AM |
| Item Weight | 97.2 pounds |
| Product Dimensions | 39.13 x 30.13 x 13.13 inches |
| Size | 15K BTU |
| Color | White |
| Power Source | Corded Electric |
| Wattage | 500 watts |
| Installation Method | Split System |
| Capacity | 1.25 Tons |
| Cooling Power | 15000 British Thermal Units |
| Seasonal Energy Efficiency Ratio (SEER) | 30 |
| Refrigerant | R 410A |
| Form Factor | Roof Mounted |
7. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Furrion website or contact their customer service department. Keep your purchase receipt and model number handy for faster assistance.
The product is returnable until January 31, 2026, as per Amazon's policy. Customer support is available for further assistance.
