Introduction
This manual provides instructions for the installation, operation, and maintenance of your YHCDLAMP Wireless Battery Operated Wall Sconce Set. This product is designed for indoor use, offering a convenient and flexible lighting solution without the need for complex wiring. It features dimmable, multi-color rechargeable LED bulbs controlled by a remote.
Image: The YHCDLAMP Wireless Battery Operated Wall Sconce installed in a bedroom, showcasing its aesthetic appeal.
Setup and Installation
The YHCDLAMP Wireless Wall Sconce is designed for easy self-installation without the need for electrical wiring. All necessary mounting hardware is included.
Package Contents:
- Wall Sconce Fixtures (2 units)
- Rechargeable LED Bulbs (2 units)
- Remote Control (1 unit)
- USB Charging Cable (Type-C) (1 unit)
- Mounting Hardware (screws, wall anchors)
Installation Steps:
- Select Location: Choose a desired indoor location for your wall sconces. Ensure the surface is suitable for mounting.
- Mark Drilling Points: Hold the sconce fixture against the wall at the desired height and mark the drilling points for the mounting screws.
- Drill Holes: Using an appropriate drill bit, drill pilot holes at the marked points. Insert wall anchors if necessary for secure mounting.
- Attach Fixture: Align the sconce fixture with the drilled holes and secure it to the wall using the provided screws.
- Insert Bulb: The rechargeable LED bulb features a magnetic design. Simply place the bulb into the sconce's inner base; it will magnetically attach.
- Initial Charge: Before first use, ensure the LED bulbs are fully charged using the provided USB Type-C cable. Connect the cable to the bulb and a standard USB power adapter (not included).
Image: Illustration of the magnetic bulb design, highlighting ease of installation and removal for charging.
Image: Visual representation of the USB charging capability and the wireless, no-wiring installation benefit.
Operating Instructions
Your YHCDLAMP wall sconce can be controlled via the included remote control or manually.
Remote Control Functions:
The remote control operates within a range of approximately 16 feet (5 meters).
| Button | Function |
|---|---|
| ON / OFF | Turns the light on or off. |
| WW (Warm White) | Activates warm white light (3000K). |
| CW (Cool White) | Activates cool white light (6000K). |
| C/W (Cycle White) | Cycles through warm white, natural white (4000K), and cool white. |
| Brightness Up / Down | Adjusts brightness levels (20%, 25%, 50%, 75%, 100%). |
| 1H / 3H / 5H | Sets a timer for the light to turn off after 1, 3, or 5 hours. |
| R / G / B / C / Y / S | Activates specific RGB colors (Red, Green, Blue, Cyan, Yellow, Smooth Color Cycle). |
| Flash Mode | Cycles through colors with a flashing effect. |
| Smooth Mode | Cycles through colors with a smooth transition effect. |
Image: The remote control displaying buttons for color, brightness, and mode selection.
Manual Control:
The bulb itself may have a power button for basic on/off functionality. Refer to the bulb's specific markings for manual operation.
Charging the Bulb:
When the light dims significantly or does not turn on, the bulb requires recharging. Remove the bulb from the sconce (it detaches magnetically) and connect the USB Type-C cable to its charging port. A full charge typically takes a few hours. The bulb's battery capacity is 10000mAh, providing 15-50 hours of illumination depending on brightness settings.
Video: Demonstration of the battery operated wall sconce, showcasing its features and operation.
Maintenance
Cleaning:
- Ensure the light is off before cleaning.
- Wipe the sconce fixture with a soft, dry cloth.
- For the fabric shade, gently dust with a soft brush or use a lint roller. Avoid using liquid cleaners directly on the fabric.
- Do not use abrasive cleaners or solvents on any part of the sconce.
Battery Care:
- Recharge the LED bulbs regularly to maintain optimal performance and battery lifespan.
- Avoid completely draining the battery frequently.
- If storing the sconce for an extended period, charge the bulbs to approximately 50% before storage and recharge every few months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light is dim. |
|
|
| Remote control not responding. |
|
|
Specifications
- Brand: YHCDLAMP
- Model: Wireless Wall Sconce Set
- Color: Bronze-SetOfTwo
- Material: Metal (Fixture), Fabric (Shade)
- Style: Modern
- Light Fixture Form: Wall
- Room Type: Bathroom, Bedroom, Entryway, Hallway, Living Room
- Indoor/Outdoor Usage: Indoor
- Power Source: Battery Powered
- Special Features: Dimmable, RGB Color Changing, Remote Control
- Control Method: Remote Control
- Light Source: LED
- Number of Light Sources: 2 (per set)
- Voltage: 2 Volts
- Light Color: Warm Light (3000K), Warm White (4000K), White Light (6000K), 7 RGB Colors
- Wattage: 12 watts
- Bulb Base: E26 (Rechargeable LED bulb)
- Brightness: 500 Lumens (Maximum)
- Battery Capacity: 10000mAh (per bulb)
- Run Time: 15-50 hours (depending on brightness)
- Charging: USB Type-C
- Mounting Type: Wall Mount
- Installation Type: Self-installation
- Required Assembly: Yes
- Included Components: Rechargeable light bulbs, remote, USB charging cable
Warranty Information
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. For specific warranty duration and terms, refer to the product packaging or contact customer support.
Customer Support
For technical assistance, troubleshooting, or questions regarding your YHCDLAMP Wireless Battery Operated Wall Sconce, please contact our customer support team. Contact information can typically be found on the product packaging or the retailer's website where the product was purchased.
You may also visit the YHCDLAMP Store on Amazon for additional product information and support resources.