Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUXRITE 2FT Linear High Bay LED Shop Lights. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power before installation or servicing. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture (120-277V).
- Do not handle live wires.
- Do not modify the fixture.
- Ensure proper grounding.
- This fixture is damp location rated but not suitable for direct water exposure.
- The fixture includes a built-in 4KV surge protector to guard against power surges.
Product Features
- Adjustable Angle Lighting: Tilt the lighting panels from 0 to 30 degrees to direct light precisely where needed.
- 4CCT Color Selectable: Choose from four color temperatures: 3000K (Soft White), 3500K (Natural White), 4000K (Cool White), and 5000K (Bright White).
- Wattage Selectable: Adjust brightness by selecting 165W, 190W, or 220W for up to 30,000 lumens.
- 0-10V Dimmable: Compatible with 0-10V dimmers for precise light output control.
- Wide Voltage Range: Operates on 120-277V electrical systems.
- Surge Protected: Integrated 4KV surge protector for durability.
- Long Lifespan: Rated for up to 50,000 hours of use.
- Certifications: UL Certified and DLC Premium listed for safety and energy efficiency.
- Beam Angle: 120 degrees for broad illumination.
- Damp Location Rated: Suitable for moist environments.
Setup and Installation
The LUXRITE Linear High Bay LED Shop Light is designed for suspended installation using the included suspension kit. Ensure the mounting surface can support the weight of the fixture.
Installation Steps:
- Disconnect Power: Turn off power at the circuit breaker before beginning installation.
- Mounting: Securely attach the suspension chains to a sturdy ceiling structure. Ensure the chains are evenly spaced to support the fixture.
- Hang Fixture: Attach the fixture to the suspension chains using the provided hardware.
- Wiring: Connect the fixture's wiring to the building's electrical supply (120-277V) according to local electrical codes. Ensure proper grounding. If using 0-10V dimming, connect the dimming wires to a compatible 0-10V dimmer.
- Adjust Tilt: Once mounted, adjust the side panels to the desired angle (0-30 degrees) to optimize light distribution.
- Power On: Restore power and test the fixture.
Operating Instructions
Your LUXRITE high bay light offers selectable color temperature and wattage settings to customize your lighting environment.
Color Temperature Selection (4CCT):
Locate the CCT selection switch on the fixture. Before powering on, slide the switch to choose your desired color temperature:
- 3000K: Soft White
- 3500K: Natural White
- 4000K: Cool White
- 5000K: Bright White
Wattage Selection:
Locate the wattage selection switch on the fixture. Before powering on, slide the switch to choose your desired brightness level:
- 165W: Lower brightness (e.g., 24,000 lumens)
- 190W: Medium brightness (e.g., 27,000 lumens)
- 220W: Highest brightness (e.g., 30,000 lumens)
Dimming Functionality (0-10V):
If connected to a compatible 0-10V dimmer, you can adjust the light output from 10% to 100% for flexible illumination control.
Maintenance
The LUXRITE High Bay LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.
- Cleaning: Periodically wipe the fixture with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the suspension chains and wiring for any signs of wear or damage.
- LEDs are not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; incorrect wiring; faulty switch. | Check circuit breaker and power connections. Verify wiring connections. Test the switch. |
| Light flickers or dims unexpectedly. | Loose wiring connection; incompatible dimmer; power fluctuation. | Ensure all wiring connections are secure. Verify dimmer compatibility (0-10V). The built-in surge protector handles minor fluctuations. If issues persist, consult a qualified electrician. |
| Incorrect color temperature or brightness. | CCT or wattage selection switch set incorrectly. | Ensure power is off, then adjust the CCT or wattage selection switch to the desired setting. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LR41705 |
| Dimensions (L x W x H) | 23.1" x 9.9" x 1.9" |
| Weight | 6.3 Pounds |
| Wattage Selectable | 165W / 190W / 220W |
| Brightness | Up to 30,000 Lumens (at 220W) |
| Color Temperature (CCT) | 3000K / 3500K / 4000K / 5000K |
| Voltage | 120-277V |
| Dimmable | 0-10V |
| Surge Protection | 4KV Built-in |
| Lifespan | 50,000 Hours |
| Beam Angle | 120° |
| Material | Metal housing, Plastic shade |
| Certifications | UL Certified, DLC Premium |
| Mounting Type | Suspended (Hanging Kit Included) |
| Indoor/Outdoor Usage | Indoor, Damp Location Rated |
Warranty and Support
This LUXRITE product is backed by a 5-year manufacturer's warranty, covering defects in materials and workmanship under normal use.
For technical support, warranty claims, or further assistance, please visit the official LUXRITE store or contact customer service:
Official LUXRITE Store: LUXRITE on Amazon