RUIJIE RG-EG105G-P V2 Router User Manual

1. Introduction

Welcome to the user manual for the RUIJIE RG-EG105G-P V2 Router. This document provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read this manual carefully before using the product to ensure proper installation and functionality.

2. Product Overview

The RG-EG105G-P V2 is a high-performance wired router designed for reliable network connectivity in home and business environments. It features multiple Gigabit Ethernet ports, including Power over Ethernet (PoE) capabilities on some LAN ports, and a dedicated WAN port for internet access.

Key Features

• Multiple Gigabit Ethernet Ports for high-speed wired connections.
• Power over Ethernet (PoE) Support on LAN ports (LAN0, LAN1, LAN2) for powering compatible devices.
• Quality of Service (QoS) for efficient traffic management.
• Robust and durable design for long-term reliability.

Device Layout

Figure 1: Front view of the RUIJIE RG-EG105G-P V2 Router. This image displays the front panel of the router, highlighting the various ports and indicators. From left to right, you can see the Status LED, Reset button, DC=54V power input, four LAN ports (LAN0, LAN1, LAN2, LAN3/WAN1), and a dedicated WAN0 port. LAN0, LAN1, and LAN2 support PoE. A QR code for device registration is also visible on the right. For device management or adding the device, scan the QR code or visit: http://rj.link/e?s=H1RPA98007918&d=EG105G-P-V2&m=10823D1B9350.

Figure 2: Angled view of the RUIJIE RG-EG105G-P V2 Router. This perspective provides a clearer view of the port labels and the ventilation grilles on the side, which are essential for heat dissipation.

3. Setup Guide

Package Contents

• RUIJIE RG-EG105G-P V2 Router
• Power Adapter (EU Plug)
• Ethernet Cable (may vary by package)

Initial Connection

1. Connect the power adapter to the DC=54V port on the router and plug it into a power outlet. The Status LED should illuminate.
2. Connect your internet service provider's modem or main network cable to the WAN0 port on the router.
3. Connect your computer or other network devices to any of the LAN0, LAN1, LAN2, or LAN3/WAN1 ports using an Ethernet cable.
4. If using PoE, connect compatible PoE devices to LAN0, LAN1, or LAN2 ports.
5. For initial configuration or device management, scan the QR code on the front panel or visit the provided link: http://rj.link/e?s=H1RPA98007918&d=EG105G-P-V2&m=10823D1B9350.

4. Operation

Indicator Lights

Reset Button

The Reset button is used to restore the router to its factory default settings. To perform a factory reset, press and hold the Reset button for approximately 5-10 seconds while the device is powered on, then release. The Status LED will change to indicate the reset process.

5. Maintenance

To ensure optimal performance and longevity of your RUIJIE RG-EG105G-P V2 Router, consider the following maintenance guidelines:

• Keep the device in a well-ventilated area to prevent overheating. Avoid blocking the ventilation grilles.
• Regularly check for and apply firmware updates from the official RUIJIE website to enhance security and performance.
• Clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Protect the device from extreme temperatures, humidity, and direct sunlight.

6. Troubleshooting

No Power

• Ensure the power adapter is securely connected to the router and a working power outlet.
• Verify the power outlet is functional by plugging in another device.
• Check the power adapter for any visible damage.

No Internet Connection

• Confirm that the WAN0 port cable is securely connected to your modem/ISP device.
• Check the status of your modem/ISP device.
• Restart both your modem/ISP device and the router by unplugging them for 30 seconds and then plugging them back in.
• Verify your internet service is active with your provider.

Device Not Accessible

• Ensure your computer is connected to one of the LAN ports.
• Check your computer's network settings (IP address, DNS).
• Try accessing the router's management interface using the default IP address (refer to product documentation or the QR code link for details).
• Perform a factory reset if all else fails (see "Reset Button" section).

7. Technical Specifications

8. Support

For further assistance, technical support, or warranty information, please refer to the official RUIJIE website or contact their customer service.

You can also use the device's QR code for quick access to support resources: http://rj.link/e?s=H1RPA98007918&d=EG105G-P-V2&m=10823D1B9350.