KEYQEEN Smart Sensor LED Makeup Mirror User Manual

1. Introduction

Thank you for purchasing the KEYQEEN Smart Sensor LED Makeup Mirror. This wall-mounted mirror features a double-sided design with 1X and 3X magnification, integrated LED lighting, and an intelligent sensor for automatic illumination. This manual provides essential information for safe installation, operation, and maintenance of your new mirror.

2. Safety Information

• Read all instructions before installation and use.
• Ensure the power supply is disconnected before installation or maintenance.
• Do not expose the mirror to excessive moisture or direct water spray.
• Keep out of reach of children.
• Do not attempt to disassemble or repair the mirror yourself. Contact qualified personnel for service.
• Avoid looking directly into the LED lights for extended periods.

3. Package Contents

• KEYQEEN Smart Sensor LED Makeup Mirror
• Mounting Hardware (screws, anchors)
• User Manual

4. Setup and Installation

This mirror is designed for wall-mounted installation. There are two power supply options:

1. Plug-in: Connect the mirror's power cord to a standard electrical outlet.
2. Hard-wired: For a concealed installation, the mirror can be directly wired into your electrical system. This requires professional installation to ensure safety and compliance with local electrical codes. Ensure power is off at the circuit breaker before beginning hard-wired installation.

Image: Detail of the mirror's wall mount base, illustrating the power connection area for either plug-in or hard-wired setup.

Installation Steps (General):

1. Choose a suitable location on the wall, ensuring it is structurally sound to support the mirror.
2. Mark the drilling points for the mounting bracket.
3. Drill holes and insert wall anchors if necessary.
4. Secure the mounting bracket to the wall using the provided screws.
5. Connect the power (either plug into an outlet or hard-wire as per electrical codes).
6. Attach the mirror unit to the mounting bracket.

5. Operating Instructions

5.1 Smart Sensor Function

The mirror is equipped with an intelligent sensor. When a person approaches the mirror, the LED lights will automatically turn on. When the person moves away, the LED lights will automatically turn off after a short delay.

Image: Illustration of the smart sensor activating the LED light when a user is within approximately 35cm, and automatically turning off after 8 seconds of inactivity.

5.2 Double-Sided Mirror

The mirror features two sides:

• Normal (1X) Side: Provides a standard, true-to-life reflection.
• Magnifying (3X) Side: Offers 3 times magnification for detailed tasks such as makeup application, shaving, or skincare routines.

Image: The mirror displaying its double-sided functionality, with one side offering a 1:1 HD effect and the other providing a 1:3 magnified view for details.

5.3 Swivel and Extendable Design

The mirror is designed with a 360-degree swivel and an extendable arm, allowing you to adjust the mirror to any desired angle and distance. When not in use, it can be folded back against the wall to save space.

Image: Diagram showing the universal 360-degree rotation points of the mirror, including the mirror head, arm joints, and wall mount connection, allowing for flexible positioning.

6. Maintenance

• Cleaning: Use a soft, damp cloth to clean the mirror surface and frame. Avoid abrasive cleaners or solvents that may damage the finish or mirror coating.
• Corrosion Resistance: The mirror's brass and stainless steel construction is designed to be rust-resistant and anti-corrosion, ensuring durability in bathroom environments.
• LED Lights: The integrated LED lights have a long lifespan (approximately 10,000 hours) and are not user-replaceable.

7. Troubleshooting

• LED lights do not turn on:
  • Ensure the mirror is properly connected to a power source.
  • Check if the power outlet is functional.
  • Verify that the smart sensor is not obstructed.
• Smart sensor is not responsive:
  • Ensure the sensor area is clean and free from dust or obstructions.
  • Confirm adequate lighting in the room; extreme darkness or brightness might affect sensor performance.
• Mirror arm is stiff or loose:
  • The joints are designed for smooth movement. Do not force the arm. If it feels unusually stiff, ensure no foreign objects are obstructing the mechanism.
  • If loose, check mounting screws for tightness.

8. Specifications

Image: Dimensional diagram of the mirror, indicating measurements such as mirror face size (200mm x 200mm), arm extension, and wall mount dimensions.

9. Warranty Information

Please refer to the product packaging or contact KEYQEEN customer support for specific warranty details. Keep your purchase receipt as proof of purchase for any warranty claims.

10. Support

For technical assistance, troubleshooting, or inquiries regarding your KEYQEEN Smart Sensor LED Makeup Mirror, please contact KEYQEEN customer support through the retailer where the product was purchased or visit the official KEYQEEN website.