Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assembly should be performed by two adults.
- Place the bed frame on a soft, clean surface during assembly to prevent scratches.
- Tighten all bolts and screws securely, but do not overtighten. Periodically check and retighten fasteners.
- Do not allow children to play on or around the bed frame during assembly.
- Do not exceed the maximum weight capacity of 1200 pounds.
- Use only the recommended mattress thickness of 8-16 inches.
Package Contents
Verify that all components listed below are included in your package. The product, parts, and instructions are typically packed in one carton.
- Winged Headboard
- Side Rails (Left and Right)
- Footboard
- Central Support Legs
- Wooden Slats
- Hardware Pack (bolts, screws, washers, Allen wrench)
- Assembly Instructions
Assembly Instructions (Setup)
Assembly typically takes approximately 30 minutes with two people. Follow the steps below for proper setup.
- Unpack Components: Carefully remove all parts from the carton and lay them out on a soft, clean surface to prevent damage. Identify each component using the parts list.
- Attach Side Rails to Headboard and Footboard: Connect the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Install Central Support Legs: Attach the central support legs to the designated points on the bed frame. These provide additional stability.
- Position Wooden Slats: Place the wooden slats across the bed frame. The slats are designed with equidistant Velcro for quick and easy installation, ensuring they stay in place.
- Apply EVA Foam Strip: Ensure the EVA foam strip is correctly positioned on the metal frame where the slats rest. This strip is designed to prevent friction and noise, contributing to silent sleep.
- Final Tightening: Once all components are in place, carefully tighten all bolts and screws. Do not overtighten.
Image: Detail showing the Velcro slat design for easy installation and the EVA foam strip for noise reduction between slats and the metal frame.
Usage (Operating)
This bed frame is designed for optimal comfort and support without the need for a box spring.
- Mattress Compatibility: The frame accommodates mattresses with a recommended thickness of 8 to 16 inches (20.3 to 40.6 cm). A mattress is not included with the bed frame.
- Weight Capacity: The bed frame has a maximum weight recommendation of 1200 pounds (approximately 544 kg).
- Headboard Comfort: The 51.2-inch (130 cm) high upholstered headboard provides comfortable back support, adapting to body curves and reducing fatigue.
Image: Visual guide illustrating the recommended mattress thickness range of 8 to 16 inches for optimal fit and comfort.
Image: A person demonstrating the comfort provided by the 51.2-inch high upholstered headboard, suitable for leaning back.
Care and Maintenance
Proper care will extend the life and appearance of your bed frame.
- Upholstery Cleaning: The rich linen upholstery is designed to be easy to clean. For general cleaning, gently vacuum with an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner.
- Frame Cleaning: Wipe the solid wood legs and metal components with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Under-Bed Cleaning: The bed frame features solid wood legs with a 5.9-inch clearance, allowing for easy cleaning underneath, including compatibility with most robot vacuums.
- Fastener Check: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability.
Image: Close-up view of the linen fabric, emphasizing its texture and quality for lasting comfort and easy maintenance.
Image: Illustration of the solid wood legs providing a 5.9-inch clearance, demonstrating how a robot vacuum can easily clean under the bed.
Troubleshooting
Refer to this section for solutions to common issues.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is squeaking or making noise. | Loose fasteners; friction between slats and frame. | Ensure all bolts and screws are securely tightened. Verify that the EVA foam strip is properly installed between the wooden slats and the metal frame to reduce friction. |
| Bed frame feels unstable or wobbly. | Loose connections; uneven floor. | Check and tighten all assembly hardware. Ensure the bed frame is placed on a level surface. Adjust central support legs if necessary. |
| Missing parts or damaged components upon arrival. | Shipping damage or packaging error. | Do not proceed with assembly. Contact customer support immediately with your purchase details for assistance and replacement parts. |
Specifications
Detailed specifications for the Jocisland Bed Frame-BHB006.
- Model Number: Bed Frame-BHB006
- Brand: Jocisland
- Color: Light Grey
- Material: Velvet, Linen, Wood, Metal
- Product Dimensions (L x W x H): Approximately 84.7" L x 80.5" W x 51.2" H (215 cm x 204 cm x 130 cm)
- Item Weight: 50.35 kg (approximately 111 lbs)
- Maximum Weight Capacity: 1200 lbs
- Recommended Mattress Thickness: 8 - 16 inches (20.3 - 40.6 cm)
- Included Components: Winged Headboard, Side Rails, Central Support Legs, Wooden Slats
- Special Features: Wooden slats included, Performance linen, Modern and contemporary style, Tufted headboard at the back, Noise-free design (EVA foam strip), Robot vacuum compatible clearance (5.9 inches)
Image: Detailed dimensions of the King size bed frame, including overall length, width, headboard height, and under-bed clearance.
Warranty Information
Jocisland products are manufactured with quality and care. For specific warranty details regarding your Bed Frame-BHB006, please refer to the warranty card included with your purchase or contact customer support.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Jocisland customer support. Have your model number (Bed Frame-BHB006) and purchase information ready for faster service.
Contact information (e.g., website, email, phone number) can typically be found on the product packaging or the retailer's website.