Pipishell Full Motion TV Wall Mount User Manual

Product Overview

The Pipishell Full Motion TV Wall Mount (Model PILF11) is designed to securely mount flat or curved televisions ranging from 40 to 82 inches, with a maximum weight capacity of 110 lbs. This mount offers versatile viewing options through its smooth swivel and extension capabilities, along with tool-free tilt adjustments. It is engineered for robust stability and ease of installation on various wall types.

Image: The Pipishell Full Motion TV Wall Mount, showing its articulating arms, wall plate, and TV brackets, along with included cable ties and a small level.

Safety Information

• Weight Capacity: Do not exceed the maximum weight capacity of 110 lbs (50 kg). Overloading can result in serious injury or property damage.
• TV Size: This mount is compatible with TVs between 40 and 82 inches. Ensure your TV's VESA pattern is within the supported range (200x100mm to 600x400mm).
• Wall Type: This mount is designed for installation on 12"/16" wood studs, solid concrete walls, or brick walls. DO NOT install on drywall alone.
• Professional Installation: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional.
• Component Check: Before installation, verify that all components are present and undamaged. Do not use damaged parts.
• Cable Management: Ensure all cables connected to the TV have sufficient slack to accommodate the full range of motion of the mount.

Package Contents

Please check the package to ensure all parts are included:

• Wall Plate Assembly with Articulating Arms
• TV Brackets (2 pieces)
• Mounting Hardware Kit (various screws, washers, spacers, anchors)
• Drilling Template
• Bubble Level
• Cable Ties
• Instruction Manual

Setup and Installation

Follow these steps carefully for proper installation. It is recommended to have at least two people for installation, especially when handling the TV.

Step 1: Verify TV Compatibility and Wall Construction

Before beginning, confirm your TV's size, weight, and VESA pattern are compatible with the mount. The mount supports VESA patterns from 200x100mm to 600x400mm.

Image: Diagram illustrating TV size compatibility (40"-82", Max Load 110 LBS), supported VESA patterns, and compatible wall types (Wood Studs, Concrete, Block).

Identify your wall type: 12"/16" wood studs, solid concrete, or brick. Do not install on drywall alone. For wood stud installation, locate the center of the studs using a stud finder.

Step 2: Attach TV Brackets to the TV

1. Carefully place your TV face-down on a soft, clean surface to prevent scratches.
2. Align the TV brackets with the VESA mounting holes on the back of your TV.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Ensure the screws are long enough to securely fasten the brackets but not so long that they damage internal components.
4. Securely fasten the TV brackets to the TV using a screwdriver. Do not overtighten.

Step 3: Mount the Arm Assembly / Wall Plate on the Wall

Use the provided drilling template to mark the pilot holes on your wall. Ensure the template is level using the included bubble level.

Image: Illustration of using the drilling template to mark holes, followed by a diagram showing post-installation leveling adjustment.

1. Drill pilot holes at the marked locations. The drill bit size will vary depending on your wall type and chosen anchors/lag bolts. Refer to the detailed instructions in the manual for specific drill bit sizes.
2. Attach the wall plate assembly to the wall using the appropriate lag bolts and washers. For concrete or brick walls, insert wall anchors into the pilot holes before fastening the lag bolts.
3. Ensure the wall plate is securely fastened and level.

Image: Close-up view of the TV mount's heavy-duty steel arms, highlighting their robust construction for reinforced stability.

Step 4: Secure the TV on the Arm Assembly / Wall Plate

1. With assistance, carefully lift the TV with the attached brackets and hook them onto the arm assembly's mounting plate.
2. Secure the TV to the mount using the safety screws or locking mechanisms provided. This prevents accidental dislodgement.
3. Perform a final check to ensure all connections are secure and the TV is stable on the mount.

Operating Instructions

The Pipishell Full Motion TV Wall Mount offers various adjustments to optimize your viewing experience.

Adjusting TV Distance (Extension and Retraction)

The mount allows you to extend your TV up to 16.3 inches from the wall and retract it to a minimum distance of 2.89 inches. Gently pull or push the TV from the center of the screen to adjust its distance from the wall.

Image: Overhead view of a TV mounted on the wall, illustrating the mount's ability to extend up to 16.3 inches and retract to 2.89 inches from the wall.

Tilting the TV

The mount features a tool-free tilt mechanism, allowing for a tilt range of +5° to -15°. This helps reduce glare and achieve an optimal viewing angle.

Image: Side view of a TV mounted on the wall, demonstrating the +5° to -15° tool-free tilt adjustment feature to reduce glare.

To adjust the tilt, locate the tilt knobs on the side of the TV brackets. Loosen them slightly, adjust the TV to the desired angle, and then tighten the knobs to secure the position.

Swiveling the TV

The mount allows for a smooth swivel range of ±45°, providing flexibility to view the TV from different positions in the room. Gently push or pull the TV horizontally to achieve the desired swivel angle.

Image: A TV mounted on the wall, showing the bidirectional arrows indicating the ±45° swivel motion for flexible viewing angles.

Post-Installation Leveling

After installation, you can make minor horizontal adjustments (±3°) to ensure your TV is perfectly level. This feature allows for fine-tuning without re-drilling.

Refer to the detailed instructions in the manual for the specific mechanism to adjust post-installation leveling.

Maintenance

• Cleaning: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
• Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or movement may cause fasteners to loosen.
• Lubrication: The articulating joints are designed for smooth operation and typically do not require lubrication. If movement becomes stiff, consult customer support.

Troubleshooting

Specifications

• Model: PILF11
• Brand: Pipishell
• Material: Metal
• Color: Black
• TV Size Compatibility: 40 - 82 inches
• Maximum Load Capacity: 110 lbs (50 kg)
• VESA Compatibility: 200x100mm to 600x400mm
• Tilt Angle: +5° to -15° (Tool-Free)
• Swivel Angle: ±45°
• Extension from Wall: 2.89 inches (min) to 16.3 inches (max)
• Post-Installation Leveling: ±3°
• Compatible Wall Types: 12"/16" Wood Studs, Solid Concrete, Brick
• Product Dimensions: Approximately 0.39 x 0.39 x 0.39 inches
• Item Weight: 12.87 pounds

Warranty and Support

Pipishell products typically come with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Pipishell website for detailed warranty information and terms.

For technical assistance, troubleshooting, or to order replacement parts, please contact Pipishell customer support. Contact information can usually be found on the product packaging or the official brand website.

You can also find additional resources, including user guides and certificates of compliance, on the product's Amazon listing page under the "Product guides and documents" section.