Introduction
The Pelican Cargo Case RFMT2 Roof Mount Kit is designed to securely attach your Pelican Cargo cases to a roof rack, truck bed, or SUV. This kit ensures your valuable gear, clothing, tools, and dry food remain organized and protected during transport.
This manual provides essential information for the proper installation, operation, and maintenance of your RFMT2 Roof Mount Kit. Please read these instructions carefully before installation and retain them for future reference.
Package Contents
Verify that all components listed below are present in your RFMT2 Roof Mount Kit:
- 4x Mounting Brackets
- 2x Pinned Yokes
- 2x Fixed Hooks
- 2x Case Plate Clamps
- 2x Quick-Release Pins
- Pelican - RFMT2, CARGO CASE ROOF MOUNT, BLK, GEN2 (Main assembly)
Compatibility
The RFMT2 Roof Mount Kit is compatible with the following Pelican Cargo Case models:
- BX140R
- BX55S
- BX85S
- BX90R
Installation Instructions
Follow these steps to properly install your Pelican Cargo Case RFMT2 Roof Mount Kit. Ensure your vehicle is parked on a level surface and the engine is off.
Step 1: Prepare the Mounting Surface
Identify the desired location on your vehicle's roof rack, truck bed, or SUV for mounting the Pelican Cargo Case. Ensure the surface is clean and free from obstructions.
Image: Components of the RFMT2 Roof Mount Kit shown installed on a vehicle's roof rack, demonstrating how the brackets attach to the rack bars.
Step 2: Attach Mounting Brackets
Position the 4 mounting brackets onto your roof rack or chosen surface. The brackets are designed to clamp onto various bar profiles. Secure them firmly using the provided hardware. Ensure even spacing for optimal case stability.
Image: A close-up view of the black mounting brackets secured to the crossbars of a roof rack. The brackets feature multiple slots for adjustability.
Step 3: Install Case Plate Clamps and Fixed Hooks
Attach the case plate clamps and fixed hooks to the Pelican Cargo Case itself, aligning them with the mounting points on the case. These components will interface with the mounting brackets on your vehicle.
Image: The RFMT2 mounting components, including the case plate clamps and fixed hooks, are shown attached to the side of a Pelican Cargo Case.
Step 4: Secure the Cargo Case
Carefully lift the Pelican Cargo Case and align the attached case plate clamps and fixed hooks with the mounting brackets on your vehicle. Lower the case until it sits securely within the brackets.
Image: A Pelican Cargo Case, model BX55S, securely mounted on a vehicle's roof rack in an outdoor setting with trees in the background.
Step 5: Insert Quick-Release Pins and Pinned Yokes
Insert the quick-release pins through the designated holes in the mounting brackets and pinned yokes to lock the case in place. Ensure the pins are fully engaged.
The kit allows for quick removal of the case when needed.
Image: A detailed view of the quick-release pin mechanism, showing the pin inserted through the bracket to secure the cargo case.
Operation
Securing the Case
Once the case is mounted and the quick-release pins are engaged, you can further secure your Pelican Cargo Case using a padlock (not included). The design allows for a padlock to be placed on one or both sides of the case, preventing unauthorized removal.
To remove the case, simply disengage the quick-release pins and lift the case from the mounting brackets.
Maintenance
- Regularly inspect all mounting hardware for tightness and signs of wear or damage.
- Clean the mounting kit components with mild soap and water as needed. Avoid abrasive cleaners.
- Ensure quick-release pins operate smoothly. Lubricate with a silicone-based spray if necessary.
Troubleshooting
Case feels loose after installation
- Re-check all mounting bracket bolts and case plate clamp screws to ensure they are tightened securely.
- Verify that the quick-release pins are fully engaged and seated properly.
- Ensure the mounting surface (roof rack, truck bed) is stable and correctly installed on your vehicle.
Difficulty inserting/removing quick-release pins
- Check for any debris or obstruction in the pin holes.
- Apply a small amount of silicone lubricant to the pin if it feels stiff.
- Ensure the case is properly aligned with the mounting brackets before attempting to insert or remove pins.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RFMT-002-BLK |
| Product Dimensions | 5 x 10 x 3 inches |
| Item Weight | 4.29 pounds |
| Manufacturer | Pelican |
| ASIN | B0C12T8TG1 |
| Date First Available | March 31, 2023 |
Warranty and Support
Limited Lifetime Guarantee
The Pelican Cargo Case RFMT2 Roof Mount Kit is designed with durability in mind. While the limited lifetime guarantee specifically applies to Pelican cases, this accessory is manufactured to the same high standards. For specific warranty details and terms applicable to your product, please refer to the official Pelican website or contact customer support.
Customer Support
For technical assistance, replacement parts, or warranty claims, please visit the official Pelican website or contact their customer support department.