Coaster Home Furnishings Brantford Farmhouse Eastern King 4-Piece Bedroom Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, use, and maintenance of your Coaster Home Furnishings Brantford Farmhouse Eastern King 4-Piece Bedroom Set. This set includes an Eastern King Panel Bed Frame, a Nightstand, a Dresser, and a Dresser Mirror. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

Your safety and the proper use of this product are important. Please observe the following safety guidelines:

• Always assemble furniture on a soft, clean surface to prevent scratches.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
• Do not allow children to climb on or play with furniture.
• For dressers and nightstands, consider using anti-tip restraints (not included) to prevent tipping, especially in homes with children.
• Distribute weight evenly in drawers and on surfaces to maintain stability.
• Keep small parts away from children during assembly to prevent choking hazards.
• Refer to the specific instructions manual included with your product for any additional safety warnings.

Package Contents

The Coaster Home Furnishings Brantford Farmhouse Eastern King 4-Piece Bedroom Set includes the following components:

• One (1) Eastern King Panel Bed Frame (Headboard, Footboard, Side Rails, Slats)
• One (1) Nightstand
• One (1) Dresser
• One (1) Dresser Mirror

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.

Setup Instructions

Assembly is required for the bed frame and attaching the mirror to the dresser. It is recommended to have two adults for assembly. Tools required (not included): Phillips head screwdriver, flathead screwdriver, hammer.

1. Bed Frame Assembly

Follow the specific assembly instructions provided in the hardware package for your bed frame. General steps include:

1. Unpack Components: Carefully remove all bed frame components from their packaging. Lay them out on a clean, soft surface.
2. Attach Side Rails to Headboard: Secure the side rails to the headboard using the provided bolts and washers. Ensure a snug fit.
3. Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard, securing with bolts and washers.
4. Install Center Support Legs (if applicable): Attach any center support legs to the bed frame as indicated in the instructions.
5. Place Slats: Position the wooden slats across the bed frame, ensuring they are evenly spaced and secured if necessary.

2. Nightstand and Dresser

The nightstand and dresser typically arrive pre-assembled. Ensure all drawers slide smoothly and handles are securely attached. If handles are not attached, use a Phillips head screwdriver to secure them.

3. Mirror Attachment

Attach the dresser mirror to the back of the dresser using the provided hardware. This usually involves aligning pre-drilled holes and securing with screws. Ensure the mirror is level and stable.

Operating Instructions

This bedroom set is designed for standard bedroom use. Ensure proper weight distribution and avoid placing excessively heavy items on top surfaces or inside drawers. The bed frame is designed to support an Eastern King size mattress and foundation (if desired).

• Drawers: Open and close drawers gently. Avoid forcing drawers open or shut if they encounter resistance.
• Bed: Use with an appropriately sized mattress. Ensure the mattress is fully supported by the slats.

Maintenance

Proper care will help maintain the appearance and longevity of your bedroom set.

• Cleaning: Clean surfaces using a damp cloth. Do not use strong chemicals, abrasive cleaners, or furniture polish containing silicone, as these can damage the 3D paper veneer finish.
• Spills: Wipe up spills immediately with a soft, dry cloth.
• Hardware: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Heat and Moisture: Keep furniture away from direct heat sources and areas of high humidity. Use coasters under beverages to prevent water rings.

Troubleshooting

If you encounter any issues with your bedroom set, refer to the following common solutions:

• Wobbly Furniture: Check all assembly hardware. Ensure all bolts and screws are fully tightened. If the floor is uneven, use furniture levelers (not included) under the legs.
• Drawers Stick or Don't Close Properly:
  • Ensure drawers are not overloaded.
  • Check that drawer slides are properly aligned and free of obstructions.
  • Verify that the dresser/nightstand itself is level.
• Scratches or Minor Damage: For minor scratches on the 3D paper veneer, touch-up pens or furniture markers in a matching color may be used. Consult with the manufacturer for recommended repair methods.

Specifications

• Color: Coastal White
• Item Weight: Approximately 289 pounds (total set)
• Special Features: Accented with dark bronze matte pull handles.
• Model Number: 207051KE-S4
• UPC: 021032579210

Warranty and Support

For warranty information or assistance with your Coaster Home Furnishings product, please refer to the warranty card included with your purchase or contact Coaster Fine Furniture customer service directly. Contact details can typically be found on the manufacturer's official website or by searching for "Coaster Fine Furniture customer support".

When contacting support, please have your model number (207051KE-S4) and proof of purchase readily available.