Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Balboa Water Group TP700 4 Jets/Aux Control Panel Overlay. This overlay is designed to replace a worn or damaged overlay on compatible Balboa TP700 series control panels, restoring the aesthetic and functional labeling of your spa or hot tub controls.
Please read these instructions carefully before proceeding with installation to ensure proper application and longevity of the product.
Setup and Installation
Proper installation of the overlay is crucial for its durability and appearance. Follow these steps carefully:
- Prepare the Surface: Ensure the surface of the existing control panel where the new overlay will be applied is clean, dry, and free from any dirt, grease, or old adhesive residue. Use a mild cleaner and a lint-free cloth. Allow the surface to dry completely.
- Remove Old Overlay (if applicable): If replacing an old overlay, carefully peel it off. Remove any remaining adhesive using an appropriate adhesive remover, ensuring not to damage the underlying control panel.
- Align the Overlay: Carefully position the new TP700 overlay over the control panel. Do not remove the adhesive backing yet. Ensure all button cutouts and the display window align perfectly with the corresponding features on your control panel. This step is critical for correct button functionality and appearance.
- Apply the Overlay: Once alignment is confirmed, peel off a small portion of the adhesive backing from one end of the overlay. Carefully press this section onto the control panel. Slowly peel off the remaining backing while progressively pressing the overlay down, working from one end to the other. This technique helps prevent air bubbles.
- Smooth Out Bubbles: If any air bubbles are present, gently press them towards the edges of the overlay to remove them. A soft, flat tool (like a credit card wrapped in a cloth) can be used, but apply light pressure to avoid scratching the surface.
- Final Adhesion: After application, firmly press down on all areas of the overlay, especially around the edges and button areas, to ensure complete adhesion.

Image 1: Front view of the Balboa Water Group TP700 4 Jets/Aux control panel overlay, showing button labels for Jets 1, Jets 2, Jets 3, Light, Aux, Jets 4, and navigation buttons.

Image 2: Back view of the Balboa Water Group TP700 4 Jets/Aux control panel overlay, illustrating the 3M adhesive backing for secure attachment.
Operating the Control Panel (Overlay Functions)
The TP700 4 Jets/Aux overlay provides clear labeling for the functions of your hot tub's control panel. The actual operation of these functions is managed by the underlying Balboa TP700 series control system. This overlay serves as the user interface for the following common functions:
- Jets 1, Jets 2, Jets 3, Jets 4: These buttons typically activate and cycle through the various jet pumps in your spa. Pressing them usually turns the corresponding pump on/off or changes its speed (e.g., low/high).
- Light: This button controls the spa's internal lighting system. Multiple presses may cycle through different light modes or colors, if supported by your spa.
- Aux (Auxiliary): The auxiliary button can be programmed to control various additional features, such as a blower, an extra pump, or other accessories, depending on your spa's configuration.
- Navigation Buttons (Up, Down, Left, Right, Select/Center): These buttons are used to navigate through the control panel's menu system, adjust settings like temperature, filter cycles, and other spa parameters. The exact functionality is determined by the TP700 software.
For detailed instructions on specific operational modes, temperature settings, and programming features, please refer to the comprehensive user manual provided with your Balboa TP700 series control system.
Maintenance
To ensure the longevity and clear readability of your TP700 overlay, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the overlay surface with a soft, damp cloth. Use only mild, non-abrasive cleaners. Avoid harsh chemicals, solvents, or abrasive pads, as these can damage the overlay's finish and printed labels.
- Protection: While the overlay is designed for spa environments, prolonged exposure to direct sunlight or extreme weather conditions can affect its lifespan. Consider using a spa cover when not in use.
- Avoid Sharp Objects: Do not use sharp objects or tools on the overlay surface, as this can cause scratches or tears.
Troubleshooting
This section addresses common issues related to the overlay itself. For issues concerning the functionality of your spa or control panel, refer to your spa's main user manual.
- Overlay Peeling or Bubbling: This often indicates improper initial application or prolonged exposure to extreme conditions. Ensure the surface was thoroughly cleaned and dry before application. If peeling occurs, the overlay may need to be replaced.
- Buttons Unresponsive After Overlay Installation: Verify that the overlay's button cutouts are perfectly aligned with the underlying physical buttons on the control panel. Misalignment can prevent proper button presses. If the issue persists, the problem may lie with the control panel itself, not the overlay.
- Fading Labels: While designed for durability, prolonged exposure to harsh chemicals or direct sunlight can cause labels to fade over many years. Regular cleaning with mild solutions and covering the spa when not in use can help mitigate this.
Specifications
| Feature | Description |
|---|---|
| Product Type | Control Panel Overlay |
| Brand | Balboa Water Group |
| Model Compatibility | TP700 Series Control Panels |
| Button Configuration | 4 Jets (Jets 1, 2, 3, 4), Light, Aux, Navigation (Up, Down, Left, Right, Select) |
| Adhesive Type | 3M Adhesive Backing (as depicted in product images) |
| ASIN | B0BZV9LQQH |
Warranty and Support
For specific warranty information regarding your Balboa Water Group TP700 4 Jets/Aux Control Panel Overlay, please refer to the documentation provided at the time of purchase or contact your authorized dealer. Warranty terms typically cover manufacturing defects.
For technical support or further inquiries, please visit the official Balboa Water Group website or contact their customer service department. Ensure you have your product model and purchase details available when seeking support.
Note: This overlay is a replacement part. The warranty for the underlying control panel or spa system is separate and not covered by this overlay's specific warranty.