1. Introduction
This manual provides essential information for the safe and effective use of your WORKPRO Folding Roller Stand. Please read these instructions carefully before assembly and operation. Keep this manual for future reference.
2. Safety Information
WARNING: Always follow basic safety precautions when using power tools and equipment to reduce the risk of personal injury.
- Ensure the roller stand is placed on a stable, level surface before use.
- Do not exceed the maximum load capacity of 250 lbs (113 kg).
- Always wear appropriate personal protective equipment (PPE) such as safety glasses.
- Keep children and bystanders away from the work area.
- Inspect the stand for damage or loose parts before each use. Do not use if damaged.
- Ensure all locking mechanisms are securely fastened before placing material on the roller stand.
3. Package Contents
Verify that all components are present before beginning assembly:
- WORKPRO Folding Roller Stand (2 units for 2PCS model)
- Assembly Hardware (bolts, nuts, washers)
- Instruction Manual
Figure 3.1: WORKPRO Folding Roller Stand with labeled components: Edge Guides, Adjustable Height, Knob, Steel Frame and Legs, Eccentric Foot.
4. Assembly Instructions
The WORKPRO Folding Roller Stand requires minimal assembly. Follow these steps:
- Unfold the main frame of the roller stand.
- Attach the crossbar/foot assembly to the main legs using the provided hardware. Ensure all bolts are tightened securely.
- Insert the adjustable height post into the main frame.
- Secure the height adjustment knob.
For a visual guide, please refer to the assembly video below:
Video 4.1: This video provides a visual guide to the assembly and installation of the WORKPRO Folding Roller Stand, along with a demonstration of its features and display.
5. Operating Instructions
5.1 Adjusting Height
The roller stand features an adjustable height mechanism. To adjust the height:
- Loosen the height adjustment knob located on the main frame.
- Raise or lower the roller assembly to the desired height (between 27 inches and 43 inches).
- Tighten the knob firmly to secure the roller assembly in place.
Figure 5.1: Illustration showing the adjustable height range of the roller stand. The total height adjusts from 27 to 43 inches.
5.2 Using Edge Guides
The roller stand is equipped with highly visible edge guides to prevent workpieces from shifting off the roller during operation.
- The edge guides can be pivoted up or down to accommodate different workpiece widths.
- Raise the guides to support wider materials or lower them for narrower pieces.
Figure 5.2: Close-up view of the roller stand's edge guides, demonstrating how they pivot to secure workpieces and prevent shifting.
5.3 Stabilizing on Uneven Surfaces
An eccentric foot is integrated into the design to enhance stability on uneven surfaces.
- Rotate the eccentric foot at the base of the stand to compensate for minor irregularities in the floor.
- Adjust until the stand is stable and does not wobble.
Figure 5.3: Close-up of the eccentric foot on the roller stand, designed to stabilize the stand on uneven surfaces.
5.4 General Use
Position the roller stand to support long workpieces when using saws, planers, or other woodworking machinery. Ensure the roller height is aligned with your equipment for smooth material feeding.
Figure 5.4: WORKPRO Folding Roller Stand in use, supporting a long wooden board during a woodworking task alongside a sawhorse.
Video 5.1: This video demonstrates the heavy-duty construction and general use of the WORKPRO Folding Roller Stand, highlighting its stability and support for various workpieces.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your roller stand:
- Cleaning: Wipe down the stand with a damp cloth after each use to remove dust and debris.
- Lubrication: Periodically apply a light lubricant to the roller bearings and height adjustment mechanism to ensure smooth operation.
- Inspection: Regularly check all bolts, nuts, and connections for tightness. Tighten any loose fasteners. Inspect the roller for smooth rotation and the frame for any signs of damage or bending.
- Storage: When not in use, fold the stand for compact storage in a dry, clean area.
7. Troubleshooting
If you encounter issues with your WORKPRO Folding Roller Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand wobbles or is unstable | Uneven surface; loose fasteners; eccentric foot not adjusted | Adjust eccentric foot; ensure stand is on a level surface; tighten all assembly bolts. |
| Roller does not turn smoothly | Debris in bearings; lack of lubrication; damaged roller | Clean roller and bearings; apply lubricant; inspect for damage and replace if necessary. |
| Height adjustment slips | Knob not tightened sufficiently; worn internal mechanism | Ensure knob is fully tightened; inspect internal locking mechanism for wear. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | WORKPRO |
| Model Number | B0BZTTFMTG |
| Material | Metal |
| Color | Red |
| Load Capacity | 250 lbs (113 kg) |
| Adjustable Height Range | 27 in. to 43 in. (68.6 cm to 109.2 cm) |
| Roller Width | 11-1/2 in. (29.5 cm) |
| Base Width | 17 in. (43 cm) |
| Assembly Required | Yes |
Figure 8.1: Dimensions of the WORKPRO Folding Roller Stand.
9. Warranty and Support
WORKPRO products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official WORKPRO website.