Bedsure Heated Blanket Throw Blanket Instruction Manual

Introduction

Thank you for choosing the Bedsure Heated Blanket Throw Blanket. This manual provides important instructions for the safe operation, use, and maintenance of your electric blanket. Please read it thoroughly before use and retain it for future reference.

Important Safety Information

WARNING: To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions.

• Always unplug the blanket from the power outlet when not in use.
• Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
• Do not use with pets.
• Do not fold, bunch, or crease the blanket during operation. This can cause overheating.
• Ensure the controller is not covered or placed near other heat sources to prevent overheating and activation of the self-protection mode.
• Do not use if wet.
• Do not use pins or other metallic objects with this blanket. They may damage the wiring.
• Regularly inspect the blanket for any signs of wear or damage. If damaged, discontinue use immediately.
• This blanket is ETL and FCC-certified and has undergone 74 safety checks exceeding UL standards. It features a 3-hour auto shut-off to prevent overheating.

Product Features

• Material: Soft Flannel (220 GSM) top and Sherpa (200 GSM) backing for comfort.
• Heating Levels: 6 adjustable heat settings for personalized warmth.
• Time Settings: 4 time-settings with 1-hour intervals for automatic shut-off.
• Auto Shut-Off: Integrated 3-hour auto shut-off feature for safety.
• Fast Heating: Advanced heating-wire technology ensures quick and consistent warmth.
• Energy Efficient: Designed for standard 120V AC wall outlets at 60Hz with a power rating of 100W, consuming significantly less energy than traditional heaters.
• Safety Certifications: ETL and FCC certified, tested with 74 safety checks.

Components

• 1 x Bedsure Heated Blanket (50" x 60")
• 1 x Digital Controller with Power Cord

Setup Instructions

1. Unpack the Blanket: Carefully remove the heated blanket and its components from the packaging.
2. Connect the Controller: Locate the connector port on the blanket. Firmly plug the controller's cord into this port until it clicks securely into place.
   

   Image: The digital controller for the Bedsure Heated Blanket. It features a display showing the heat level (e.g., '06') and buttons for power, temperature adjustment, and timer settings.
3. Plug into Power: Plug the power cord from the controller into a standard 120V AC wall outlet (60Hz). Ensure the outlet is easily accessible.

   Video: A user demonstrates plugging in the Bedsure heated blanket's controller and adjusting its settings. This video highlights the ease of connecting the blanket to power and selecting desired heat levels.

4. Position the Blanket: Spread the blanket evenly on your bed or sofa, ensuring it is not folded, bunched, or tucked in.

Operating Instructions

1. Power On/Off: Press the power button on the controller to turn the blanket on or off. The digital display will illuminate when powered on.
2. Adjust Heat Level: Use the '+' and '-' buttons to select your desired heat level from 1 to 6. Level 6 provides the highest warmth.
3. Set Timer: Press the 'TIME' button to cycle through the available auto shut-off time settings (e.g., 1, 2, 3, 4 hours). The blanket will automatically turn off after the selected duration.
4. Pre-Heat Function: Some models may feature a pre-heat function. Refer to your controller for specific instructions if available.

Maintenance

Cleaning Instructions:

1. Disconnect Power: Always unplug the blanket from the wall outlet and disconnect the controller from the blanket before cleaning.
2. Machine Wash: The blanket is machine washable. Use a gentle cycle with cold water. Do not bleach.
3. Air Dry: Do not tumble dry. Hang the blanket to air dry completely. Ensure it is fully dry before reconnecting the controller and using it again.
4. Spot Cleaning: For minor spills, spot clean with a damp cloth and mild detergent.

Troubleshooting

Controller Error ('F' appears on screen or screen goes black):

1. Check for Obstructions: Ensure the controller is not wrapped in any products or placed near other heat sources, as overheating can trigger the self-protection mode.
2. Reset Connection: Unplug the power plug from the wall outlet and then unplug the coupler (the connection between the controller and the blanket).
3. Verify Power Source: Make sure you are using a standard 120V AC power source.
4. Reconnect: Reconnect the coupler firmly and then plug the power cord back into the wall outlet. Check the controller for normal operation.
5. Contact Support: If the issue persists after following these steps, please contact Bedsure customer service for assistance.

Specifications

Image: A sizing reference guide illustrating the dimensions of various Bedsure heated blanket sizes, including Throw (50"x60"), Twin (62"x84"), Full (72"x84"), Queen (84"x90"), and King (90"x100"), shown in context with furniture.

Warranty and Support

For warranty information or technical support, please contact Bedsure customer service. Keep your purchase receipt for any warranty claims.

For further assistance, please visit the Bedsure Store.