Feit Electric OneSync Bronze Solar Powered 40W LED Pathway Light (2-Pack)

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Feit Electric OneSync Bronze Solar Powered 40W LED Pathway Light 2-pack. These solar-powered lights are designed for landscape decorative lighting, offering a convenient and energy-efficient solution for illuminating pathways and outdoor areas.

Image: Feit Electric OneSync Bronze Solar Powered 40W LED Pathway Light 2-pack showing packaging with two pathway lights and a remote.

2. Package Contents

Your Feit Electric OneSync Pathway Light 2-pack includes:

• 2 x Feit Electric OneSync Bronze Solar Powered 40W LED Pathway Lights
• 1 x Remote Control
• Ground stakes/poles for installation
• Instruction Manual

3. Setup & Installation

Follow these steps to set up your solar pathway lights:

1. Unpack: Carefully remove all components from the packaging.
2. Assemble Poles: Connect the pole sections to achieve the desired height (up to 12 inches). Attach the ground stake to the bottom of the assembled pole.
3. Attach Light Head: Securely attach the solar light head to the top of the assembled pole.
4. Activate: Locate the ON/OFF switch, usually found near the solar panel or light base. Ensure the light is switched to the 'ON' position for automatic operation.
5. Placement: Choose a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging. Insert the ground stake firmly into the soil.
6. Initial Charge: Allow the lights to charge for a full day in direct sunlight before their first use to ensure maximum battery capacity.

Visual Installation Guide

Video: A tutorial demonstrating the setup and installation process for Home Zone Mesh Linkable Lighting products, including solar pathway lights. This video illustrates general principles of assembling and placing solar pathway lights, as well as the concept of a connected lighting system.

4. Operation

Your Feit Electric OneSync Pathway Lights are designed for automatic operation:

• Automatic On/Off: The lights will automatically turn on at dusk and turn off at dawn, provided they have received sufficient sunlight for charging.
• Run Time: Expect up to 8 hours of illumination on a full charge.
• Color Selection: Utilize the included remote control to select from 5 different white light settings or 8 selectable color options to customize your outdoor ambiance.
• OneSync Wireless Connected System: These lights are part of the OneSync wireless connected system, allowing for synchronized control and grouping with other compatible Feit Electric OneSync products via the remote.

5. Maintenance

To ensure optimal performance and longevity of your solar pathway lights, regular maintenance is recommended:

• Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may obstruct sunlight absorption.
• Clear Obstructions: Ensure that no trees, shrubs, or other objects are shading the solar panel, especially during peak sunlight hours.
• Battery Care: While the internal battery is designed for durability, its lifespan can be affected by extreme temperatures. If the light's performance significantly diminishes over time, consider replacing the rechargeable battery (if accessible and user-replaceable per product design).

6. Troubleshooting

If your solar pathway lights are not functioning as expected, try the following:

• Light Not Turning On:
  • Ensure the ON/OFF switch is in the 'ON' position.
  • Verify the solar panel is clean and receiving direct sunlight for adequate charging.
  • Check if the ambient light is too bright; the light may not activate if it detects sufficient natural light.
• Dim or Short Illumination:
  • The battery may not be fully charged. Ensure the solar panel is exposed to direct sunlight for a full day.
  • Clean the solar panel to maximize charging efficiency.
  • Consider the age of the battery; older batteries may hold less charge.
• Inconsistent Operation:
  • Ensure there are no external light sources (e.g., streetlights, porch lights) interfering with the light sensor.
  • Check for any physical damage to the light or solar panel.

7. Specifications

8. Warranty & Support

This product is covered by a 3-year warranty from the date of purchase, as indicated on the product packaging. For warranty claims, technical assistance, or any product-related inquiries, please contact Feit Electric customer support directly.

Refer to the product packaging or the official Feit Electric website for the most up-to-date contact information and warranty details.