MOUNTUP Freestanding Monitor Stand User Manual

1. Introduction

Thank you for choosing the MOUNTUP Freestanding Monitor Stand. This manual provides detailed instructions for the assembly, operation, and maintenance of your new monitor stand. Designed for ergonomic viewing and space-saving, this stand is compatible with 13-32 inch flat or curved screens weighing up to 17.6 lbs, supporting VESA patterns 75x75 mm and 100x100 mm.

Figure 1: MOUNTUP Freestanding Monitor Stand (Model MU1003)

This image shows the complete MOUNTUP Freestanding Monitor Stand, featuring a black VESA mounting plate attached to a vertical black pole, which is securely mounted on a rectangular black tempered glass base.

2. Product Features

• Screen Compatibility: Supports one 13-32 inch flat or curved screen up to 17.6 lbs. Compatible with VESA patterns 75x75 mm and 100x100 mm.
• Ergonomic Adjustments:
  • Tilt: +30°/-30° for optimal viewing angles.
  • Swivel: +25°/-25° for flexible screen positioning.
  • Rotation: 360° for easy switching between landscape and portrait modes.
  • Height Adjustment: Up to 6.89 inches to fit various sitting positions.
• Freestanding Design: No drilling or clamping required, providing convenience and protecting your desk surface. Features a heavy tempered glass base for stability and an elegant look.
• Cable Management: Integrated cable clips keep wires organized for a clean and clutter-free workspace.
• Sturdy Construction: Made from durable metal and tempered glass for long-lasting use.

Figure 2: Product Dimensions and VESA Compatibility

This image illustrates the key dimensions of the monitor stand, including a total height of 17.3 inches, a base width of 7.9 inches, and a base depth of 11.8 inches. It also highlights the maximum monitor size of 32 inches, a weight capacity of 17.6 lbs, and VESA compatibility for 75x75 mm and 100x100 mm patterns.

3. Package Contents

Please verify that all components are present and in good condition before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Monitor Stand Base (Tempered Glass)
• Vertical Support Pole
• VESA Mounting Plate
• Mounting Hardware Kit (screws, washers, spacers)
• Assembly Tools (e.g., Allen wrench)
• Instruction Manual (this document)

4. Setup and Installation

The MOUNTUP monitor stand is designed for quick and easy assembly, typically within 5 minutes. Follow these steps for a secure setup:

1. Attach the Support Pole to the Base: Secure the vertical support pole to the tempered glass base using the provided screws and tools. Ensure it is firmly tightened for stability.
2. Attach VESA Plate to Monitor: Align the VESA mounting plate with the VESA holes on the back of your monitor. Use the appropriate screws, washers, and spacers from the hardware kit to securely attach the plate to your monitor. Ensure the screws are tightened sufficiently but do not overtighten.
3. Mount Monitor to Stand: Carefully slide the VESA plate with the attached monitor onto the vertical support pole. Ensure the monitor is properly seated and secured by the safety lock mechanism.

For detailed visual instructions, please refer to the included quick start guide or the official product assembly video if available.

5. Operating Instructions

The MOUNTUP monitor stand offers various adjustments to achieve your ideal ergonomic viewing position.

5.1 Height Adjustment

To adjust the monitor's height, loosen the knob on the back of the vertical pole, slide the monitor up or down to the desired level, and then re-tighten the knob to secure it. The stand offers multiple height levels for precise positioning.

Figure 3: 6-Level Height Adjustment

This image displays the monitor stand with a monitor attached, illustrating the six distinct height levels available for adjustment, ranging from 7.3 inches to 14.3 inches from the desk surface to the center of the VESA plate.

5.2 Tilt Adjustment

The monitor can be tilted +30°/-30° to reduce glare and optimize viewing comfort. Use the provided Allen wrench to loosen the bolt on the VESA plate mechanism, adjust the tilt angle, and then firmly tighten the bolt to secure the monitor in place.

Figure 4: Tilt Adjustment Range

This image shows a monitor on the stand, demonstrating the ability to tilt the screen both upwards (+30°) and downwards (-30°) to achieve an ergonomic viewing angle and minimize eye strain.

5.3 Swivel Adjustment

Swivel the monitor +25°/-25° left or right to share your screen or adjust your viewing angle without moving the entire stand.

Figure 5: Swivel Adjustment Range

This image illustrates the monitor stand's swivel capability, allowing the screen to rotate +25° to the right and -25° to the left, enabling flexible screen positioning on a desk.

5.4 Rotation Adjustment

Rotate the monitor 360° to easily switch between landscape and portrait orientations, ideal for different tasks like coding or document viewing.

Figure 6: 360° Rotation Capability

This image demonstrates the monitor stand's full 360° rotation feature, allowing the user to effortlessly switch the monitor between landscape and portrait orientations for various viewing needs.

5.5 Cable Management

Utilize the integrated cable clips on the vertical pole to route and organize your monitor cables, maintaining a tidy and professional workspace.

Figure 7: Cable Management and Anti-Slip Feet

This image highlights the cable management feature on the back of the monitor stand's pole, showing cables neatly routed. It also shows the rubber anti-slip feet on the base for added stability.

5.6 Operational Video Guide

For a visual demonstration of the stand's functions and adjustments, please watch the official product video below:

6. Maintenance

To ensure the longevity and optimal performance of your MOUNTUP monitor stand, follow these simple maintenance guidelines:

• Cleaning: Wipe the stand and base with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or tempered glass.
• Periodic Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Lubrication: No lubrication is typically required for the adjustment mechanisms. If any movement becomes stiff, ensure no debris is obstructing the mechanism.

7. Troubleshooting

8. Specifications

9. Warranty and Support

MOUNTUP provides a 3-year manufacturer support for this product. If you encounter any issues or have questions regarding your monitor stand, please do not hesitate to contact our friendly technical support team.

For support, please visit the official MOUNTUP website or refer to the contact information provided with your purchase documentation.