Introduction
Thank you for choosing the Claiks 48-Inch Black Electric Standing Desk. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new desk. Please read these instructions carefully before use to ensure proper function and longevity of the product.
Image: The Claiks 48-inch Black Electric Standing Desk, showcasing its spacious desktop, integrated keyboard tray, and control panel.
Safety Information
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity of 176 pounds (80 kg).
- Keep children and pets away from the desk during height adjustments.
- Avoid placing liquids directly on the control panel or near electrical components.
- Disconnect power before cleaning or performing any maintenance.
Package Contents
Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
Image: An exploded view of all components included in the Claiks standing desk package, showing the desktop sections, frame, keyboard tray, control panel, and various hardware.
- Desktop sections (2 pieces)
- Desk Legs and Frame components
- Keyboard Tray and mounting hardware
- Control Panel and power adapter
- Headphone Hooks (2)
- Cable Clips
- Feet Pads
- Assembly Hardware (screws, bolts, Allen wrench)
- Instruction Manual
Note: A Phillips screwdriver is required for assembly but is not included.
Setup and Assembly
Assembly typically requires two individuals due to the weight and size of the components. All necessary tools, except a Phillips screwdriver, are provided.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Refer to the 'Package Contents' section to ensure all items are present.
- Assemble Desk Frame: Follow the detailed diagrams in the included printed manual to connect the leg columns to the crossbar and feet. Ensure all bolts are tightened securely.
- Attach Desktop: Place the two desktop sections onto the assembled frame. Align the pre-drilled holes and secure the desktop to the frame using the provided screws.
- Install Keyboard Tray: Mount the keyboard tray rails to the underside of the desktop. Slide the keyboard tray into the installed rails.
- Mount Control Panel: Attach the control panel to the designated location on the front edge of the desk, typically on the right side.
- Connect Electronics: Connect the motor cables and control panel cable to the main control box. Plug the power adapter into the control box and then into a wall outlet.
- Attach Accessories: Install the headphone hooks and cable clips as desired for organization.
Operating Instructions
Height Adjustment
The Claiks standing desk features smooth electric height adjustment, allowing you to transition between sitting and standing positions effortlessly. The desk can be adjusted from a minimum height of 28.3 inches to a maximum height of 46.5 inches (including the 2.36-inch desktop thickness).
Image: The Claiks standing desk shown at its minimum (28.3 inches) and maximum (46.5 inches) height settings, demonstrating the adjustable range.
- Up/Down Buttons: Use the Up (▲) and Down (▼) arrows on the control panel to manually adjust the desk height.
- Quiet Operation: The custom-designed motor operates with noise levels as low as 45 decibels, ensuring minimal disruption during adjustments.
Programmable Height Presets
The desk includes four programmable height presets for quick access to your preferred sitting and standing heights.
Image: A close-up view of the Claiks control panel, highlighting the digital height display, up/down arrows, and three numbered preset buttons (1, 2, 3).
- Set a Height: Adjust the desk to your desired height using the Up/Down buttons.
- Save Preset: Press and hold one of the numbered preset buttons (1, 2, or 3) until the display flashes or beeps, indicating the height has been saved.
- Recall Preset: Press the corresponding numbered button to automatically move the desk to the saved height.
Keyboard Tray and Accessories
- Keyboard Tray: The spacious 23.6" × 11.8" slide-out keyboard tray accommodates full-size keyboards and provides ample operational space.
- Headphone Hooks: Utilize the two integrated hooks to keep your headphones or other accessories organized and within reach.
- Cable Management: Use the included wire collector and cable clips to maintain a tidy workspace and prevent cable clutter.
Image: A close-up of the desk's side, showing a pair of headphones hanging neatly from the integrated hook, demonstrating its utility.
Maintenance
- Cleaning: The desk features a waterproof and wear-resistant tabletop. Wipe surfaces with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
- Motor Care: The electric motor is designed for durability. Avoid obstructing the desk's movement during adjustment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move or respond to controls. | Power cable disconnected; motor cable loose; control panel malfunction. | Check power connection to wall outlet and control box. Ensure all motor cables are securely connected. If problem persists, contact customer support. |
| Desk moves unevenly or makes unusual noises. | Loose connections in the frame; obstruction in the lifting mechanism. | Inspect all frame connections and tighten any loose bolts. Check for any obstructions under or around the desk legs. |
| Height presets are not saving or recalling correctly. | Incorrect saving procedure. | Ensure you press and hold the preset button until the display flashes or beeps to save the height. For recalling, a single press should suffice. |
| Desk wobbles at higher settings. | Uneven floor; loose frame connections; excessive weight. | Ensure the desk is on a level surface. Check and tighten all frame connections. Do not exceed the maximum weight capacity. |
Specifications
Image: A detailed diagram illustrating the key dimensions of the Claiks 48-inch standing desk, including desktop width, depth, and height adjustment range, along with the maximum load capacity.
| Feature | Detail |
|---|---|
| Model Number | EGESD5B-4 |
| Product Dimensions (D x W x H) | 24"D x 48"W x 28.3"H |
| Color | Black |
| Minimum Height | 28.3 inches |
| Maximum Height | 46.5 inches |
| Tabletop Thickness | 2.36 inches |
| Keyboard Tray Dimensions | 23.6" × 11.8" |
| Maximum Weight Recommendation | 176 Pounds (80 kg) |
| Motor Noise Level | As low as 45 dB |
| Number of Height Presets | 4 |
| Top Material Type | Engineered Wood |
| Base Material | Alloy Steel |
| Assembly Required | Yes (Recommended 2 people) |
Warranty and Support
The Claiks Standing Desk comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or contact Claiks customer support.
If you encounter any issues or have questions regarding your product, please contact Claiks customer service for assistance. Contact information can typically be found on the product packaging or the official Claiks website.
