KREAFUNK KF-0913
Contents
KREAFUNK aLIGHT Portable Bluetooth Speaker and Lamp User Manual
Model: KF-0913 | Brand: KREAFUNK
Introduction
The KREAFUNK aLIGHT is a versatile portable Bluetooth speaker and lamp designed for both indoor and outdoor use. It features fine-tuned sound with powerful bass, water resistance (IPX5), and a long-lasting rechargeable battery. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your aLIGHT device.

Image: Front view of the KREAFUNK aLIGHT portable speaker and lamp in Cotta Orange.
What's in the Box
Verify that all items are present in the packaging:
- KREAFUNK aLIGHT Portable Bluetooth Speaker and Lamp
- Charging Cable (USB)
- Mounting Hardware (if applicable, for magnetic mounting)

Image: The aLIGHT speaker shown with typical accessories, including a charging cable.
Setup
Initial Charging
Before first use, fully charge your aLIGHT speaker. A full charge takes approximately 2 hours.
- Connect the provided USB charging cable to the charging port on the aLIGHT speaker.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate during charging and turn off when fully charged.
Bluetooth Pairing
To connect your aLIGHT speaker to a Bluetooth-enabled device:
- Ensure the aLIGHT speaker is charged and powered on.
- Activate Bluetooth on your smartphone, tablet, or other audio device.
- Search for available Bluetooth devices. The aLIGHT speaker will appear as "aLIGHT" or "KREAFUNK aLIGHT".
- Select "aLIGHT" from the list to pair. A confirmation sound will indicate successful pairing.
- Once paired, the speaker will automatically connect to the last paired device when powered on and within range.
Operating Instructions
Power On/Off
Locate the power button on the device. Press and hold to power on or off.
Audio Playback
Once connected via Bluetooth, audio from your paired device will play through the aLIGHT speaker. Control playback (play/pause, skip tracks) directly from your connected device.
Light Function
The aLIGHT features an integrated lamp with adjustable brightness levels.
- Press the light button (if separate from power) or cycle through light modes using the main button.
- The lamp offers three brightness levels: Low (approx. 8 lumens), Medium (approx. 16 lumens), and High (approx. 24 lumens).
- To turn the light off, cycle through the brightness levels until the light is off.

Image: The aLIGHT speaker illustrating its adjustable light settings.
Magnetic Mounting
The aLIGHT speaker can be easily mounted to magnetic surfaces or using the included mounting hardware.

Image: Two aLIGHT speakers demonstrating magnetic mounting on a tiled wall.
Maintenance
Cleaning
To clean your aLIGHT speaker, use a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port cover is securely closed before exposing the device to water.
Water Resistance (IPX5)
The aLIGHT speaker is IPX5 water resistant, meaning it can withstand splashes and light rain. It is not designed for submersion in water. Always ensure the charging port cover is sealed to maintain water resistance.

Image: The aLIGHT speaker with water droplets, highlighting its water-resistant design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is depleted. | Charge the device fully (approx. 2 hours). |
| Cannot pair with Bluetooth device. | Bluetooth is off on source device; speaker is not in pairing mode; too far from speaker. | Ensure Bluetooth is enabled. Power cycle the speaker. Move closer to the speaker (within 10 meters). Disconnect from other devices. |
| No sound from speaker. | Volume too low; device not connected; audio source issue. | Increase volume on both the speaker and the connected device. Re-pair the Bluetooth connection. Check audio source. |
| Light function not working. | Battery low; light function off. | Charge the device. Press the light button to cycle through brightness levels. |
Specifications
| Model Name | aLIGHT |
| Item Model Number | KF-0913 |
| Dimensions | 2.52"D x 2.52"W x 2.01"H (6.4cm D x 6.4cm W x 5.1cm H) |
| Item Weight | 3.53 ounces (100 Grams) |
| Connectivity Technology | Bluetooth, USB |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Battery Life | Up to 15 hours (speaker and light combined) |
| Charging Time | Approx. 2 hours |
| Battery Capacity | 1000 Milliamp Hours (Lithium Ion) |
| Water Resistance Level | IPX5 (Water Resistant) |
| Speaker Type | Multi Room |
| Audio Output Mode | Stereo |
| Material | Plastic |
| Color | Cotta Orange |
Warranty & Support
The KREAFUNK aLIGHT Portable Bluetooth Speaker and Lamp comes with a 2-Year Warranty from the date of purchase, covering manufacturing defects.
For technical support, warranty claims, or further assistance, please visit the official KREAFUNK website or contact their customer service department. Keep your proof of purchase for warranty validation.
For more information, you may visit the KREAFUNK Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.