1. Introduction
This user manual provides instructions for the Beyution RG10B(B)/BGEF replacement remote control, designed for various Midea Air Conditioner models. This remote offers a fully functional and easy-to-use solution for replacing your original or broken remote.
Compatible Models:
- RG10B(D)/BGEF
- RG10B(D1)/BGEFU1
- RG10B1(D)/BGEF
- RG10B2(D)/BGCEF
- RG10B10(D)/BGEF
- RG10A4(D)/BGEF
- RG10A4(D1)/BGEFU1
- RG10A5(D)/BGEF
- RG10A5(D1)/BGEFU1
- RG10A5(D1)/BGCEFU1
- RG10A5(D)/BGCEF
- RG10A11(D)/BGEF
This remote control is designed to be a direct replacement and requires no complex setup or programming.
2. Setup
2.1 Battery Installation
The remote control requires two (2) AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) ends align with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Figure 2.1: Battery compartment of the remote control.
2.2 Initial Use
Once batteries are installed, the remote control is ready for immediate use. No additional programming or pairing is required. Simply point the remote towards your Midea Air Conditioner unit and begin operation.
3. Operating Instructions
This section details the functions of the buttons on your Beyution replacement remote control. The remote is designed for ease of use with an ergonomic grip and responsive buttons.
Figure 3.1: Front view of the remote control.
Figure 3.2: Angled view of the remote control.
3.1 Button Functions
| Button | Function |
|---|---|
| Power (Orange Button) | Turns the air conditioner unit ON or OFF. |
| Mode | Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto). |
| Fan Speed (Fan Icon) | Adjusts the fan speed (e.g., Low, Medium, High, Auto). |
| Temperature Up/Down (Arrows) | Increases or decreases the set temperature. |
| OK | Confirms selections or settings. |
| SET | Enters or exits setting menus. |
| Sleep Mode (Moon Icon) | Activates or deactivates sleep mode for quiet operation and energy saving. |
| Timer (Clock Icon) | Sets the ON/OFF timer for the unit. |
| Swing | Controls the vertical louver swing function. |
| Turbo | Activates rapid cooling/heating for quick temperature changes. |
| LED | Turns the display light on the AC unit ON or OFF. |
| Clean | Initiates the self-clean function (if supported by AC unit). |
| Favorite (Heart Icon) | Activates a pre-set favorite setting (if supported by AC unit). |
The remote control offers a farther transmitting distance, stable performance, and fastest response within 8 meters, and is also effective up to approximately 10 meters, provided there is a clear line of sight to the air conditioner's receiver.
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote's response becomes sluggish or the display on the air conditioner does not respond to commands. Always replace both batteries simultaneously with new AAA alkaline batteries.
4.2 Cleaning
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these may damage the remote's surface or internal components.
4.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.
5. Troubleshooting
If you experience issues with your remote control, please refer to the following common problems and solutions:
- Remote not responding:
- Ensure batteries are correctly installed with proper polarity.
- Replace old batteries with new AAA alkaline batteries.
- Check for any obstructions between the remote control and the air conditioner's receiver.
- Ensure you are within the effective operating range (up to 10 meters).
- Certain functions not working:
- Verify that the specific function is supported by your Midea Air Conditioner model. While this remote is broadly compatible, some advanced functions may vary by AC unit.
- Ensure the remote is pointed directly at the AC unit.
- Remote display is dim or blank:
- This indicates low battery power. Replace the batteries.
If the problem persists after trying these solutions, please contact customer service for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 6.3 x 1.57 x 0.39 inches |
| Item Weight | 2.82 ounces |
| Batteries Required | 2 AAA batteries (not included) |
| Connectivity Technology | Infrared |
| Compatible Devices | Midea Air Conditioner units (specific models listed in Introduction) |
| Max Number of Supported Devices | 1 (dedicated to one AC unit at a time) |
| Special Feature | Ergonomic design |
| Model Number | WY-RG10B-B-BGEF |
7. Warranty and Support
While specific warranty details are not provided, Beyution offers after-sales service to ensure customer satisfaction. If you encounter any issues with your remote control or cannot find your specific model listed, please contact our customer service team via email.
Our customer service staff aims to provide a satisfactory solution within 24 hours.
For support, please refer to the contact information provided with your purchase or on the Beyution official website.