Introduction
The FULEN AL-1 Under Cabinet Cordless LED Lights provide versatile illumination for various indoor spaces such as kitchens, closets, pantries, and stairs. These lights feature a built-in motion sensor, a manual sweep sensor for hands-free operation, and a rechargeable battery for cordless convenience. Each light delivers 220 lumens of brightness and is designed for easy installation.
Image: Three FULEN AL-1 under cabinet LED lights, illustrating the product in a pack.
What's in the Box
Please verify that all components are present upon opening the package.
- FULEN AL-1 Under Cabinet Cordless LED Lights (Quantity: 3)
- Rechargeable Battery (integrated into each light)
- USB Charging Cables
- Adhesive Metal Plates for mounting
- User Manual
Specifications
| Feature | Detail |
|---|---|
| Brand | FULEN |
| Model Number | AL-1 |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene |
| Power Source | Battery Powered |
| Battery Capacity | 2500mAh |
| Charging Time | Approximately 3-4 hours |
| Brightness | 220 Lumens |
| Light Source | LED |
| Control Method | Motion Sensor, Gesture (Sweep Sensor), Touch Switch |
| Indoor/Outdoor Usage | Indoor |
| Mounting Type | Under Cabinet (Magnetic) |
| Item Dimensions (L x W x H) | 9.8"L x 1.35"W x 0.45"H |
Setup and Installation
The FULEN AL-1 lights are designed for simple, tool-free installation using magnetic adhesion.
- Prepare the Surface: Ensure the desired installation surface is clean, dry, and smooth.
- Attach Adhesive Metal Plates: Peel the protective film from one side of the adhesive metal plate. Stick this side firmly onto the chosen surface. Apply pressure for a few seconds to ensure good adhesion.
- Mount the Light: The light bar has integrated magnets. Align the light bar with the installed metal plate and allow the magnets to secure it in place.
Image: Step-by-step guide for magnetic installation of the light bar.
For metal surfaces, the light can be directly attached without the adhesive metal plates.
Operating Instructions
Charging the Battery
Before first use, fully charge the light for 3-4 hours. Connect the provided USB charging cable to the light's Type-C port and a compatible USB power source. The indicator light will change to show charging status (e.g., red for charging, green for fully charged).
Image: The light bar connected to a USB-C charging cable, illustrating the charging process.
Motion Sensor Modes
The light features two automatic motion sensor modes:
- AUTO1 Mode: This mode is more sensitive. The light will automatically turn on when motion is detected in low light conditions, such as early morning or evening.
- AUTO2 Mode: This mode is more energy-saving. The light will only activate when motion is detected in darker conditions, typically at night.
Select the appropriate mode using the switch on the light bar to suit your environment and preferences.
Video: Demonstration of the motion sensor functionality in an indoor setting.
Video: Another demonstration showcasing the motion sensor activation of the under cabinet lights.
Sweep Sensor Function
In "ON" mode, the light can be turned on or off by sweeping your hand above the sensor. Position your hand approximately 0.43 to 3 inches (1-7.5 cm) above the sensor to activate this function. This allows for hands-free control, which is useful in areas like kitchens.
Image: Illustration of the sweep sensor in action, allowing hands-free control.
Maintenance
- Cleaning: Wipe the light bar with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lights when brightness begins to dim. Store the lights in a cool, dry place if not in use for extended periods, and recharge them every few months.
- Sensor Care: Keep the motion and sweep sensors clean and free from obstructions to ensure optimal performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is discharged. Incorrect mode selected. Sensor obstructed. | Charge the light for 3-4 hours. Ensure the light is in "ON", "AUTO1", or "AUTO2" mode. Clear any obstructions from the sensor. |
| Motion sensor is too sensitive or not sensitive enough. | Incorrect AUTO mode selected for ambient light conditions. | Switch between AUTO1 (more sensitive) and AUTO2 (less sensitive, for darker conditions) to find the optimal setting. |
| Light falls off after installation. | Adhesive not properly applied or surface not clean. Excessive force applied to the light. | Ensure the surface is clean and dry before applying adhesive. Press firmly for several seconds. Re-apply with new adhesive if necessary. Avoid bumping the light. |
| Sweep sensor not responding. | Light not in "ON" mode. Hand too far or too close to the sensor. | Ensure the light is set to "ON" mode. Position your hand within 0.43-3 inches (1-7.5 cm) above the sensor. |
Warranty and Support
FULEN provides a warranty for this product. If you encounter any concerns regarding the quality of your product or are not satisfied with your purchase, please contact our customer support team. We are committed to responding within 12 hours and providing a satisfactory solution for any issues.
For support, please refer to the contact information provided on the product packaging or the official FULEN website.