1. Safety Information
Please read all instructions carefully before installing or operating this appliance. Retain this manual for future reference. Incorrect installation, maintenance, or use can be dangerous and may void the warranty.
- Electrical Safety: Ensure the power supply matches the voltage specified on the appliance. Do not use extension cords or adapters. Always disconnect power before cleaning or servicing.
- Installation: Installation should be performed by a qualified technician in accordance with local regulations. Ensure adequate ventilation in the room.
- Flammable Materials: Do not operate the chimney near open flames or highly flammable materials. Clean the oil collector regularly to prevent grease buildup, which can be a fire hazard.
- Children and Pets: Keep children and pets away from the appliance during operation and maintenance.
- Usage: This appliance is intended for domestic kitchen use only. Do not use it for purposes other than its intended use.
2. Unpacking & Components
Carefully unpack the chimney and check for any damage. Ensure all components listed below are present. If any parts are missing or damaged, contact customer support immediately.
Included Components:
- 1 N Main Unit with Bee Filter
- 1 N Oil Collector
- 1 N Hood
- 1 N Expandable Flexible Pipe
- 1 N Wall Mounting Bracket
- 3 N Wall Mounting Screws
- 4 N Screws For Chimney Cover
- 3 N Wall Mounting Plastic Plugs
- 2 N Screws For Flexible Pipe
- 1 N Drill Hole Stencil
- 1 N Instruction Manual Cum Warranty Card
Image: Overview of the INALSA Racer 60BKMAC Chimney highlighting its black coating, LED lights, gesture and touch control, 1350 m³/hr suction power, and filterless design with a bee filter.
3. Setup & Installation
Professional installation is highly recommended for optimal performance and safety. Ensure the installation area is suitable and meets all local building codes.
3.1 Site Preparation
- Choose a wall-mounted location directly above your cooking range.
- Ensure there is sufficient clearance from the cooking surface as per manufacturer guidelines (typically 65-75 cm).
- Verify that the wall can support the weight of the chimney.
- An electrical outlet must be available within reach of the power cord.
3.2 Mounting the Chimney
- Use the provided drill hole stencil to mark the positions for the wall mounting bracket.
- Drill holes and insert the wall mounting plastic plugs.
- Secure the wall mounting bracket using the wall mounting screws.
- Carefully lift and hang the main chimney unit onto the bracket.
- Attach the chimney cover using the designated screws.
3.3 Ducting Connection
- Connect the expandable flexible pipe to the chimney's exhaust outlet.
- Route the pipe to an external vent, ensuring the shortest and straightest path possible to maximize extraction efficiency.
- Secure the flexible pipe using the provided screws.
3.4 Electrical Connection
- Plug the chimney into a grounded electrical outlet.
- Ensure the power supply is stable and matches the chimney's requirements.
4. Operating Instructions
The INALSA Racer 60BKMAC chimney features intuitive touch controls and a motion sensor for ease of use.
4.1 Control Panel Overview
The control panel is located on the front of the chimney and includes touch-sensitive buttons for various functions.
Image: The INALSA Racer 60BKMAC Chimney demonstrating its touch control and motion sensor functionality, allowing users to turn it on and off with hand gestures.
4.2 Power On/Off
- Touch Control: Press the power button icon on the control panel to turn the chimney on or off.
- Motion Sensor: Wave your hand from left to right in front of the sensor to turn the chimney on. Wave from right to left to turn it off.
4.3 Fan Speed Adjustment
The chimney offers three fan speeds to suit different cooking needs.
Image: The INALSA Racer 60BKMAC Chimney illustrating its three exhaust fan speeds (Low, Medium, High) for adjusting ventilation based on cooking requirements.
- Touch Control: Use the speed control buttons (usually indicated by fan icons or numbers) on the panel to cycle through Low, Medium, and High speeds.
- Motion Sensor: Some models allow speed adjustment via specific hand gestures (refer to the quick start guide for detailed gestures if applicable).
4.4 LED Lighting
- Press the light bulb icon on the control panel to turn the LED lights on or off, illuminating your cooking area.
4.5 Auto Clean Function
- Press the 'Auto Clean' button (often indicated by a water droplet or cleaning icon) to initiate the heat auto-clean cycle.
- This function uses heat to melt and collect grease into the oil collector.
Image: The INALSA Racer 60BKMAC Chimney demonstrating its powerful 1350 m³/hr suction, efficiently removing odor, steam, and grease from the kitchen.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your INALSA chimney.
5.1 Heat Auto Clean Cycle
The heat auto-clean function helps to melt and collect grease from the internal components.
Image: Visual representation of the Heat Auto Clean process, showing grease being melted and collected into the oil collector.
- Run the auto-clean cycle regularly, depending on your cooking frequency (e.g., once every 15-30 days).
- Ensure the oil collector is empty before starting the cycle.
5.2 Oil Collector Cleaning
The oil collector gathers melted grease during operation and auto-clean cycles.
- Turn off the chimney and disconnect it from the power supply.
- Locate and carefully remove the oil collector tray.
- Empty the collected oil and wash the tray with warm, soapy water.
- Rinse thoroughly and dry completely before reinserting.
5.3 Exterior Cleaning
- Wipe the exterior surfaces with a soft cloth dampened with mild detergent.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
- Ensure no water enters the electrical components.
6. Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not start | No power supply; Loose connection; Faulty switch | Check power plug and circuit breaker; Ensure connections are secure; Contact service if switch is faulty. |
| Low suction power | Oil collector full; Obstruction in ducting; Incorrect fan speed | Clean oil collector; Check ducting for blockages; Increase fan speed. |
| Unusual noise during operation | Loose parts; Motor issue; Obstruction in fan blades | Check for loose screws or components; Disconnect power and inspect fan blades for obstructions; Contact service for motor issues. |
| LED lights not working | Loose connection; Faulty LED module | Check connections; Contact service for LED module replacement. |
7. Specifications
Detailed technical specifications for the INALSA Racer 60BKMAC Kitchen Chimney.
| Feature | Detail |
|---|---|
| Brand | Inalsa |
| Model Number | Racer 60BKMAC |
| Product Dimensions (D x W x H) | 59.8D x 46W x 51.2H Centimeters |
| Colour | Black |
| Special Features | Motion Sensor, Auto Clean, Filterless |
| Finish Type | Powder Coated |
| Noise Level | 65 Decibels |
| Mounting Type | Wall Mount |
| Voltage | 240V |
| Light Source | LED |
| Filter Type | Mesh (Bee Filter) |
| Item Weight | 9500 Grams |
| Suction Capacity | 1350 m³/hr |
8. Warranty & Support
INALSA provides comprehensive warranty and support for your product.
8.1 Warranty Information
- Motor Warranty: 7 years from the date of purchase.
- Product Warranty: 2 years from the date of purchase.
- The warranty covers manufacturing defects under normal domestic use. It does not cover damage due to misuse, improper installation, or unauthorized repairs.
- Please retain your purchase invoice and the Instruction Manual Cum Warranty Card for warranty claims.
8.2 Customer Support
For any queries, service requests, or warranty claims, please contact the manufacturer:
- Manufacturer: Tuareg Marketing Pvt. Ltd.
- Address: Khasra No- 1189, Bhalswa, New Delhi-110033, IND
- Contact Number: 9773982065