Introduction
This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.
The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.
Package Contents
Before installation, verify that all components are present:
- 1 x Flexson Wall Mount
- Instruction Manual
- Fixings (screws, wall plugs)
- Corner Adapter (optional use)
Figure 1: Exploded view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.
Safety Information
- Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
- Use appropriate tools and safety equipment during installation.
- If unsure about installation, consult a qualified professional.
- Keep small parts away from children.
Setup and Installation
Follow these steps for proper installation of your Flexson Wall Mount:
- Choose Location: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Mark Drilling Points: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
- Drill Holes: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
- Insert Wall Plugs: Insert the appropriate wall plugs into the drilled holes.
- Attach Wall Bracket: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
- Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
- Mount Speaker: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
- Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
- Adjust Position: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Figure 2: Front view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.
Figure 3: Side view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.
Figure 4: Angled view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.
Operating Instructions
Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.
- Tilting: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
- Swiveling: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
- Inverted Mounting: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Figure 5: Close-up side view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.
Maintenance
The Flexson Wall Mount requires minimal maintenance.
- Cleaning: Wipe the mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Periodic Check: Periodically check all screws and fixings to ensure they remain tight and secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount feels loose on wall | Screws or wall plugs not properly secured. | Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type. |
| Speaker not stable in cradle | Cradle components not fully assembled or tightened. | Check all screws securing the speaker cradle. Ensure the speaker is correctly seated. |
| Difficulty adjusting tilt/swivel | Adjustment mechanism is too tight. | Do not force. Check the manual for specific adjustment points and loosen slightly if necessary. |
Specifications
| Model Number | FLXE100WM1021 |
| Brand | Flexson |
| Compatible Speaker | SONOS ERA100 |
| Material | Alloy Steel |
| Color | Black |
| Finish Type | Powder Coated |
| Product Dimensions | 6.93 x 4.72 x 6.02 inches (17.6 x 12 x 15.3 cm) |
| Item Weight | 14.4 ounces (0.41 kg) |
| Load Capacity | 14.2 Pounds (6.44 kg) |
| Tilt Adjustment | Up to 20 degrees downwards |
| Swivel Adjustment | 80 degrees (40 degrees left, 40 degrees right) |
Warranty and Support
For warranty information and technical support, please refer to the official Flexson website or contact their customer service department. Keep your purchase receipt as proof of purchase.
Manufacturer: Flexson
Website: Visit the Flexson Store on Amazon (for general brand information)
