UeeVii CPE241

Download PDF
Contents

UeeVii Wireless Bridge User Manual

Model: CPE241

Introduction

The UeeVii CPE241 Wireless Bridge is designed to extend your 2.4GHz wireless network over long distances, up to 1 kilometer (0.62 miles). This device provides a stable and reliable point-to-point wireless connection, ideal for scenarios requiring network extension to remote buildings such as barns, garages, shops, or for surveillance systems. This manual provides detailed instructions for setting up, operating, and maintaining your wireless bridge.

Two UeeVii wireless bridge units facing each other with a blue signal wave between them.

Image: UeeVii CPE241 Wireless Bridge units establishing a connection.

Package Contents

Before beginning installation, please verify that all items are present in your package:

  • 2 x UeeVii CPE241 Wireless Bridge Units
  • 2 x Passive PoE Power Adapters
  • 2 x Ethernet Cables
  • 2 x Mounting Clamps
  • 1 x Quick Start Guide
Contents of the UeeVii Wireless Bridge package, including two bridge units, two PoE adapters, two Ethernet cables, two mounting clamps, and a quick start guide.

Image: All components included in the UeeVii Wireless Bridge package.

Specifications

FeatureDetail
Model NumberCPE241
Wireless Communication Standard2.4 GHz Radio Frequency (IEEE 802.11 b/g/n)
Wireless Transmission RateUp to 300Mbps
Ethernet Port Speed10/100Mbps RJ45
Antenna8dBi Directional Antenna
Transmission DistanceUp to 1 KM (0.62 miles) with clear line of sight
Power SupplyPassive Power over Ethernet (PoE) via included adapters
Security ProtocolWPS (Wi-Fi Protected Setup)
Operating SystemProprietary Router OS
Product Dimensions9 x 4 x 1 inches
Item Weight1.54 pounds
Diagram illustrating the UeeVii wireless bridge's 2.4Ghz frequency and 300Mbps wireless transmission rate.

Image: Wireless transmission rate and frequency details.

Setup and Installation

Mounting the Devices

For optimal performance, the wireless bridge units must be mounted outdoors with a clear, unobstructed line of sight between them. Avoid any physical barriers such as trees, buildings, or dense foliage that could interfere with the wireless signal.

  1. Choose a suitable mounting location for each unit. Ideal locations are high points like poles or building eaves, ensuring direct visibility to the other unit.
  2. Use the provided mounting clamps to securely attach the units to a pole or other stable structure. Ensure the units are oriented to face each other directly.
  3. Verify the stability of the mounting to prevent movement due to wind or other environmental factors.
A UeeVii wireless bridge unit mounted on a pole, illustrating its outdoor placement and antenna coverage.

Image: Wireless bridge unit mounted on a pole for outdoor use.

Connection Topology

The UeeVii Wireless Bridge operates in a Master-Slave configuration. One unit acts as the Master (transmitter) and connects to your main network, while the other acts as the Slave (receiver) and provides network access at the remote location.

  • Master Bridge (Transmitter Mode): Connects to your existing router or network switch via an Ethernet cable. The included PoE adapter powers the unit and provides data connectivity.
  • Slave Bridge (Receiver Mode): Connects to your remote device (e.g., PC, IP camera, NVR, or another router/switch) via an Ethernet cable. The included PoE adapter powers the unit and receives data wirelessly from the Master Bridge.
Diagram showing two connection topologies: one for extending network to a PC, and another for extending network to an IP camera, both using the wireless bridge.

Image: General connection topology for the wireless bridge.

Diagram illustrating the Master Bridge in Transmitter Mode, connected to a router, PoE adapter, and then to a switch, monitor, and DVR.

Image: Master Bridge (Transmitter Mode) setup.

Diagram illustrating the Slave Bridge in Receiver Mode, connected to an IP camera and PoE adapter.

Image: Slave Bridge (Receiver Mode) setup.

Diagram showing a point-to-point surveillance range expansion setup, with a Master CPE connected to a switch and NVR, and a Slave CPE connected to a camera.

Image: Point-to-point setup for surveillance range expansion.

Device Pairing

The UeeVii Wireless Bridge units are designed for easy pairing:

  1. Ensure both units are powered on using their respective PoE adapters.
  2. On each unit, locate the H-C buttons. Push one unit's button to the 'H' side (for Master) and the other unit's button to the 'C' side (for Slave).
  3. Within one minute of setting the H-C buttons, press the 'RST' (Reset) button on both units.
  4. The pairing process should complete within 2 minutes. Observe the indicator lights on the units to confirm successful pairing (refer to the Quick Start Guide for specific LED indicators).
Diagram showing the H-C buttons and RST button on the wireless bridge units for easy pairing, distinguishing between Master and Slave configurations.

Image: Easy pairing process for Master and Slave units.

Operation

Once successfully paired and connected, the UeeVii Wireless Bridge creates a transparent wireless link between your two locations. Data transmitted over this link behaves as if it were sent through a physical Ethernet cable.

  • The Master unit transmits your network signal wirelessly.
  • The Slave unit receives the signal and makes it available via its Ethernet port.
  • The 2.4GHz frequency band ensures compatibility with a wide range of devices, while the 300Mbps transmission rate is suitable for various applications including internet browsing, file sharing, and standard definition video streaming.

Applications

The UeeVii Wireless Bridge is versatile and can be used in numerous scenarios:

  • Extending Home Network: Provide internet access to detached garages, barns, workshops, or other outbuildings.
  • Surveillance Systems: Connect IP cameras or NVRs in remote locations without running long Ethernet cables.
  • Small Business/Campus Connectivity: Link separate buildings within a property for shared network resources.
  • Outdoor Wi-Fi Hotspots: Extend Wi-Fi coverage to outdoor areas by connecting an access point to the Slave unit.
Image showing a Master Bridge and Slave Bridge setup for smooth surveillance video, with a 1KM distance capability.

Image: Wireless bridge facilitating smooth surveillance video over long distances.

Illustration of the wireless bridge providing network solutions for garages, barns, and warehouses.

Image: Network extension solutions for various remote structures.

Diagram showing two wireless bridge units transmitting a signal over a 1 KM distance across a city landscape, emphasizing the need for no wall blocking.

Image: Illustrating the 1 KM transmission distance capability.

Troubleshooting

  • No Connection/Pairing Issues:
    • Ensure clear line of sight between both units. Any obstruction can severely degrade or block the signal.
    • Verify that the H-C buttons are correctly set (one 'H', one 'C') and the RST button was pressed on both units within the specified timeframe.
    • Check LED indicators on both units to diagnose status (refer to Quick Start Guide for LED meanings).
    • Confirm both units are receiving power from their respective PoE adapters.
  • Slow Speed/Intermittent Connection:
    • Re-check line of sight for any new obstructions (e.g., growing trees, new structures).
    • Ensure units are securely mounted and not shifting, which could misalign them.
    • Minimize interference from other 2.4GHz devices in the area.
    • Verify Ethernet cable integrity and connections.
  • Power Issues:
    • Only use the included passive PoE injectors. These units are not compatible with standard 802.3at/af PoE switches.
    • Ensure power outlets are functional.

Maintenance

To ensure the longevity and optimal performance of your UeeVii Wireless Bridge:

  • Periodically inspect the mounting hardware for tightness and stability.
  • Keep the units clean from dust, dirt, and debris. Use a soft, dry cloth for cleaning.
  • Regularly check the line of sight between the units for any new obstructions and clear them if necessary.
  • Ensure all cable connections are secure and free from damage.

Warranty and Support

UeeVii products are designed for reliability and performance. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact UeeVii customer support. Refer to the contact information provided in your Quick Start Guide or visit the official UeeVii website for the most up-to-date support resources.

© 2024 UeeVii. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.