Introduction
Thank you for purchasing the Dripex LED Vanity Bathroom Mirror. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new mirror. Please read this manual thoroughly before installation and keep it for future reference.
This mirror features an anti-fog function, high-quality LED lighting, and a convenient touch button for control. It is designed for wall-mounted installation and can be oriented horizontally or vertically.
Important Safety Information:
- The light on the mirror is supplementary and cannot replace the main room lighting.
- Ensure power is disconnected before any installation or maintenance.
- This product is designed for indoor use in bathrooms or dressing areas.
Key Features
- Anti-fog Function: Automatic defogging for a clear reflection.
- High Quality Illumination: 6000K white light, CRI≥90Ra for true color reflection.
- 2-in-1 Touch Button: Controls both anti-fog and light functions.
- Flexible Power Options: Supports wall switch or external plug power supply.
- Versatile Installation: Can be installed vertically or horizontally.
- Durable Construction: Environmental protection, copper-free silver-plated mirror design, UL certification, IP44 waterproof LED light strip.
Image: Overview of key features including touch button, LED strip, anti-fog, horizontal/vertical mounting, wall switch support, easy installation, IP44 waterproof, and plug/hardwired options.
Setup and Installation
Before beginning installation, ensure you have all necessary tools and components. It is recommended to have two people for installation due to the mirror's size and weight.
Package Contents:
- Dripex LED Vanity Bathroom Mirror (1 unit)
- Mounting Screws (quantity as per diagram)
- Wall Anchors (quantity as per diagram)
- Power Cord (1m)
- Instruction Manual (this document)
Image: Diagram showing the mirror dimensions (80cm x 60cm, 3.5cm thickness) and included accessories: screws, wall anchors, and a 1-meter power cord.
Tools Required (Not Included):
- Drill
- Drill bits appropriate for wall anchors
- Measuring tape
- Level
- Pencil
- Screwdriver
Installation Steps:
- Choose Mounting Orientation: Decide whether to mount the mirror horizontally or vertically. The mirror supports both orientations.
- Mark Drilling Points: Measure and mark the desired position on the wall. Use a level to ensure the marks are perfectly aligned. The distance between the mounting points will vary based on orientation.
- Drill Holes: Drill holes at the marked points. Insert the wall anchors flush with the wall surface.
- Install Screws: Insert the mounting screws into the anchors, leaving a small portion of the screw head exposed for the mirror to hang on.
- Hang the Mirror: Carefully lift the mirror and align the hanging slots on the back with the exposed screw heads. Gently lower the mirror until it is securely seated on the screws.
- Connect Power:
- Plug-in Method: If using the plug, connect the mirror's power cord to a suitable wall outlet.
- Hardwired Method: If hardwiring to a wall switch, ensure power is OFF at the circuit breaker. Connect the mirror's wires to the corresponding household wiring using appropriate wire connectors. Consult a qualified electrician if unsure.
- Test Functionality: Restore power and test the mirror's light and anti-fog functions.
Image: Illustration demonstrating the two wall mount methods, vertical and horizontal, for the Dripex LED mirror. The horizontal orientation is recommended.
Image: Diagram illustrating the two power supply options: direct plug-in to an external outlet or hardwiring to a wall switch for a cleaner installation.
Operating Instructions
The Dripex LED Vanity Bathroom Mirror is controlled by a single touch button located on the mirror surface.
Touch Button Functions:
- Short Press: Toggles the LED light and anti-fog function ON/OFF. When the mirror is off, the button light is blue. When the mirror is on (light and defogger active), the button light is white.
- Long Press: Adjusts the brightness of the LED light. Hold the button to cycle through brightness levels (dim to bright). Release to set the desired brightness.
Image: Illustration showing the touch button's indicator light: blue when demister and LED are off, white when demister and LED are on.
Anti-Fog Function:
The anti-fog function activates automatically when the mirror is turned on. Heat is released from the center of the mirror outwards to remove water vapor, ensuring a clear reflection even in steamy conditions.
Image: A visual representation of the anti-fog function, showing a clear mirror after defogging compared to a fogged mirror before defogging. Arrows indicate heat dispersion.
Image: Split image demonstrating the effectiveness of the anti-fog feature, with one side showing a fogged mirror and the other side showing a clear mirror.
Maintenance and Care
Proper care and maintenance will ensure the longevity and optimal performance of your Dripex LED Vanity Bathroom Mirror.
Cleaning the Mirror:
- Always turn off the mirror and disconnect power before cleaning.
- Use a soft, damp cloth with a mild glass cleaner.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the mirror surface or frame.
- Wipe dry with a clean, lint-free cloth to prevent water spots.
General Care:
- Avoid direct impact to the mirror surface.
- Ensure the mirror is not exposed to excessive moisture or direct water spray beyond normal bathroom use.
- Regularly check the mounting hardware to ensure the mirror remains securely attached to the wall.
Troubleshooting
If you encounter any issues with your Dripex LED Vanity Bathroom Mirror, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror light does not turn on. | No power supply. Loose connection. Faulty touch button. | Check if the power cord is securely plugged in or if the wall switch is on. Verify all electrical connections (if hardwired). Contact customer support if the button is unresponsive. |
| Anti-fog function not working. | Function not activated. Excessive humidity. | Ensure the mirror is turned on via the touch button. The anti-fog function activates with the light. Allow a few minutes for the defogger to work. Ensure proper bathroom ventilation. |
| Light brightness cannot be adjusted. | Incorrect operation. | Ensure you are performing a long press on the touch button to adjust brightness, not a short press. |
| Mirror appears dim or flickers. | Low power supply. LED strip issue. | Ensure stable power supply. Contact customer support for LED strip replacement if necessary. |
If the problem persists after attempting these solutions, please contact Dripex customer support for further assistance.
Product Specifications
| Feature | Detail |
|---|---|
| Model Name | LED Vanity Bathroom Mirror |
| Model Number | 32"L x 24"W 1 Color Light (ASIN: B08NG2WC1B) |
| Brand | Dripex |
| Product Dimensions | 32 inches (L) x 24 inches (W) (approx. 80cm x 60cm) |
| Thickness | 35mm (1.38 inches) |
| Light Color Temperature | 6000K (White Light) |
| Color Rendering Index (CRI) | ≥90Ra |
| Waterproof Rating | IP44 |
| Frame Material | Glass, Aluminum |
| Mirror Material | Copper-free silver-plated mirror, Explosion-proof glass |
| Mounting Type | Wall Mount (Horizontal or Vertical) |
| Power Supply | Corded (Plug-in or Hardwired) |
| Certifications | UL Certified LED light strip |
| Item Weight | 19.26 pounds |
Image: The Dripex LED Vanity Bathroom Mirror, 32x24 inches, illuminated and installed above a sink in a contemporary bathroom.
Image: Cross-section diagram illustrating the nine layers of materials composing the mirror, including float glass, reflective silver plating, metal layer, reinforced plating, anti-fog layer, LED lamp beads, LED protective casing, aluminum frame, and fully covered protective panel.
Warranty Information
Dripex stands behind the quality of its products. While specific warranty terms are not detailed in this manual, please retain your proof of purchase for any warranty claims. For information regarding the warranty period and coverage, please contact Dripex customer support.
Customer Support
For any questions, technical assistance, or issues not covered in this manual, please contact Dripex customer support. We are committed to providing excellent after-sales service.
Contact Information:
- Please refer to the contact details provided on the product packaging or the official Dripex website.
- When contacting support, please have your product model number (32"L x 24"W 1 Color Light) and purchase date ready.
Dripex is dedicated to ensuring your satisfaction. If you have any problems with the mirror upon receipt, please feel free to contact us.
