EnhanBili VS2 Novastar LED Multi Screen Splicing Processor User Manual

1. Introduction

The EnhanBili VS2 is a high-performance multi-picture splicing processor developed by Nova Technology. It supports simultaneous input from various sources, including 2-way CVBS, 2-way VGA, 1-way HDMI, and 3-way DVI signals. Built on a powerful FPGA processing platform, the VS2 enables fast and seamless switching between any input source, offering flexible picture construction capabilities for diverse display applications.

2. Key Features

• Input Voltage: AC 100-240V, 50/60Hz
• Operating Temperature: -20℃ to 60℃
• Overall Power Consumption: 30W
• Net Weight: 3.5 Kg
• Gross Weight: 7 Kg
• Supports multiple input types: CVBS, VGA, HDMI, DVI.
• FPGA processing platform for high performance.
• Fast and seamless switching between input sources.
• Flexible picture construction capabilities.

3. Setup Guide

Follow these steps to properly set up your VS2 Multi Screen Splicing Processor:

1. Unpacking: Carefully remove the VS2 processor from its packaging. Inspect for any signs of damage during transit.
2. Placement: Place the processor on a stable, flat surface or mount it in a standard rack. Ensure adequate ventilation around the unit to prevent overheating.
3. Power Connection: Connect the provided AC power cable to the power input port on the rear panel of the VS2. Plug the other end into a grounded AC 100-240V, 50/60Hz power outlet.
4. Input Source Connection: Connect your video input sources (e.g., computers, media players, cameras) to the corresponding input ports (CVBS, VGA, HDMI, DVI) on the rear panel. Refer to the rear panel diagram for port identification.
5. Output Display Connection: Connect your LED display panels or other output devices to the DVI output ports on the rear panel. Ensure the cables are securely fastened.
6. Network Connection (Optional): For remote control or advanced configuration, connect an Ethernet cable from your network router or computer to the Ethernet port on the VS2.
7. Power On: Once all connections are secure, power on the VS2 processor. The indicator lights should illuminate, indicating the unit is operational.

Figure 3.1: Rear Panel Layout of the VS2 Processor. This image displays the various input ports (CVBS1, VGA1, HDMI1, DVI1, CVBS2, VGA2, DVI2, DVI3, DVI4) and output ports (DVI1, DVI2), along with the Ethernet, USB, and AC power input. This diagram is crucial for identifying where to connect your video sources and displays.

4. Operating Instructions

This section outlines the basic operation of the VS2 processor for managing your LED display content.

4.1. Power On/Off

• To power on, ensure the power cable is connected and press the power button (if available, otherwise it powers on automatically when connected).
• To power off, press and hold the power button or disconnect the power cable. It is recommended to shut down connected displays first.

4.2. Input Source Selection

The VS2 allows you to select from multiple input sources. Use the front panel controls or connected software to switch between inputs.

• Identify the desired input source (e.g., HDMI, VGA, DVI).
• Press the corresponding input selection button on the front panel or navigate through the OSD (On-Screen Display) menu to select the source.
• The selected input will be displayed on the connected LED screen(s).

4.3. Output Configuration and Splicing

The core function of the VS2 is to splice multiple inputs across various outputs. This typically involves software configuration.

• Connect a computer to the VS2 via the Ethernet or USB port.
• Install the Novastar control software (not included, typically downloaded from Novastar's official website).
• Launch the software and establish communication with the VS2 processor.
• Within the software, configure the output resolution and arrangement of your LED display panels.
• Define the splicing layout, specifying which input sources are displayed on which parts of the overall LED screen.
• Save and apply the configuration to the VS2.

4.4. Basic Settings

Access the OSD menu (if available) or the control software for basic adjustments:

• Brightness/Contrast: Adjust image quality.
• Color Temperature: Fine-tune color balance.
• Input Resolution: Ensure input signals match optimal display resolutions.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your VS2 processor.

• Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or aerosols directly on the device. Ensure ventilation openings are free from dust and debris.
• Ventilation: Always ensure that the ventilation slots are not blocked. Overheating can lead to performance issues and damage.
• Cable Management: Keep all cables neatly organized and securely connected. Avoid bending cables sharply or placing heavy objects on them.
• Storage: If storing the unit for an extended period, disconnect all cables, pack it in its original packaging (if possible), and store it in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

This section addresses common issues you might encounter with the VS2 processor.

7. Specifications

Figure 7.1: Dimensional Drawing of the VS2 Processor. This diagram provides precise measurements of the unit, including its length, width, and height, which are essential for rack mounting or space planning.

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. EnhanBili products typically come with a standard manufacturer's warranty covering defects in materials and workmanship. Keep your proof of purchase for warranty claims.

For further assistance, you may contact the seller: Shenzhen Suyen Optoelectronics Co., Ltd.