Introduction
This instruction manual provides detailed guidance for the installation and maintenance of the BlueStars W10528947 Washer Basket Driven Hub Kit. This kit is designed to restore proper agitation and spin functions to your washing machine, addressing common issues such as lack of agitation, slow spinning, or excessive noise. Please read all instructions carefully before proceeding with installation.
Image: The BlueStars W10528947 Washer Basket Driven Hub Kit helps maintain your washing machine's performance.
Compatibility
The W10528947 Washer Basket Driven Hub Kit is compatible with a wide range of top-loading washing machines from major brands. This part replaces several original equipment manufacturer (OEM) part numbers, ensuring broad applicability.
Replaces Part Numbers:
- AP5665171
- W10396887
- W10528947VP
- PS6012095
- EAP6012095
- 2684908
Compatible Brands:
- Maytag
- Whirlpool
- Kenmore
- Amana
- Crosley
- Inglis
- Admiral
Image: Dimensions of the W10528947 Washer Basket Driven Hub Kit.
Image: The W10528947 kit is compatible with various major washer brands.
Symptoms Addressed
This replacement part is designed to resolve several common issues that can affect the performance of your washing machine:
- Will not agitate: The washer tub does not move or agitate clothes during the wash cycle.
- Pumps but will not spin: Water drains, but the washer tub does not spin to remove excess water from clothes.
- Spins slowly: The washer tub spins at a reduced speed, leaving clothes excessively wet.
- Noisy: The washer produces unusual or loud noises during operation, particularly during agitation or spin cycles.
Image: Common washer symptoms that the W10528947 hub kit can fix.
Product Components
The BlueStars W10528947 Washer Basket Driven Hub Kit includes the essential components required for a complete replacement:
- Washer Basket Driven Hub: This component connects the wash basket to the agitator drive shaft, enabling the basket to spin and agitate.
- Drive Block Retainer: A crucial part that secures the driven hub in place, ensuring stable and efficient operation.
Image: The complete replacement kit includes the driven hub and drive block retainer.
Image: The components are made from durable, high-grade plastic.
Safety Information
WARNING: Before attempting any repair, always unplug the washing machine from its power source to prevent electrical shock. Wear work gloves to protect your hands from sharp edges or moving parts.
Installation Guide
Follow these steps to replace the washer basket driven hub kit:
- Disconnect Power: Unplug the washer from the electrical outlet.
- Access the Agitator: Open the washer lid. Depending on your model, you may need to remove a fabric softener dispenser or cap from the top of the agitator.
- Remove the Agitator: Use a wrench or appropriate tool to loosen and remove the bolt securing the agitator. Carefully pull the agitator straight up and out of the washer tub.
- Remove the Wash Plate (if applicable): If your washer has a wash plate instead of a traditional agitator, remove the cap and bolt, then lift the wash plate out.
- Remove Old Hub Kit: Locate the old basket driven hub kit. It may be secured with screws or simply seated in place. Remove any fasteners and carefully pry out the old hub and drive block retainer.
- Clean Area: Clean any debris or residue from the drive shaft and the area where the new hub will be installed.
- Install New Hub Kit: Place the new drive block retainer onto the drive shaft, ensuring it is properly aligned. Then, firmly press or tap the new basket driven hub onto the drive shaft until it is fully seated. Ensure the splines engage correctly.
- Reinstall Agitator/Wash Plate: Carefully lower the agitator or wash plate back onto the drive shaft, aligning it with the new hub. Secure it with the bolt and tighten it appropriately.
- Reconnect Power: Plug the washer back into the electrical outlet.
- Test Washer: Run a short cycle to ensure the washer agitates and spins correctly without unusual noises.
Image: Visual guide for the installation process.
Installation Video Guide
Video: An official BlueStars video demonstrating the installation of the W10528947 Washer Basket Driven Hub Kit. This video provides a visual walkthrough of the steps outlined above, offering additional clarity for the repair process.
Operating Instructions
As a replacement component, the W10528947 Washer Basket Driven Hub Kit does not require specific operating instructions beyond ensuring proper installation. Once installed, your washing machine should resume normal operation, with the hub facilitating the correct movement of the wash basket and agitator during cycles.
Maintenance
To ensure the longevity of your washer and its components, including the newly installed hub kit, consider the following general maintenance tips:
- Avoid Overloading: Do not overload the washing machine, as this can put excessive strain on the agitator and drive system.
- Balance Loads: Distribute laundry evenly in the tub to prevent imbalance during spin cycles, which can cause wear and tear.
- Regular Cleaning: Periodically clean the washer tub and agitator to remove detergent residue or foreign objects that could interfere with movement.
- Inspect Components: If you notice any unusual sounds or performance issues, inspect the agitator and hub area for signs of wear or damage.
Troubleshooting
If your washing machine continues to exhibit issues after installing the W10528947 Washer Basket Driven Hub Kit, review the following:
- No Agitation/Slow Spin: Double-check that the new hub is fully seated and the agitator/wash plate is securely fastened. Ensure the splines are correctly engaged.
- New Noises: Verify that all components are tightened and no tools or foreign objects were left inside the washer. Ensure the agitator or wash plate is not rubbing against the tub.
- Washer Not Starting: This part primarily affects agitation and spin. If the washer does not start, the issue may lie with other components such as the lid switch, motor, or control board.
If problems persist, it is recommended to consult a qualified appliance technician.
Image: The kit addresses these common washer issues.
Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | BlueStars |
| Part Number | W10528947 |
| Item Weight | 8.1 ounces (for the pack of 4) |
| Product Dimensions | Approximately 1 x 1 x 1 inches (individual component) |
| Material | Durable, high-quality plastic |
| Included Components | Washer Basket Driven Hub, Drive Block Retainer |
Warranty Information
BlueStars offers a 100% Lifetime Protection for the W10528947 Washer Basket Driven Hub Kit. This warranty ensures reliable performance and covers any defects or issues that may arise during the product's lifespan. For warranty claims or further details, please contact BlueStars customer support.
Customer Support
For any questions, concerns, or assistance with the BlueStars W10528947 Washer Basket Driven Hub Kit, our professional customer support team is available to help. Please refer to the contact information provided with your purchase or visit the official BlueStars store on Amazon for support options.